Abstract:Lean-burn natural-gas spark-ignition combustion inside a diesel geometry is characterized by two distinct and successive events: a rapid burning process inside the piston bowl, followed by a much slower burn inside the squish region. This paper used experimental data (including images of flame natural luminosity) to investigate the magnitude and phasing of these two combustion stages. The results showed a substantial impact on the parameters generally used to investigate the combustion phenomena in spark-ignition engines (e.g., the 10-to-90-percent energy release). A better solution to identify the start and end of the rapid- and the slow-burning stages in such an engine is to use the inflection points in the apparent rate of heat release. Moreover, as the higher turbulence in a diesel-like environment accelerates flame inception, the 5% or 10% energy release used traditionally to define the flame inception period should not be used for these engines because the enflamed zone already reached an appreciable size at the two corresponding crank angle degrees. Further, the 2nd inflection point in the apparent rate of heat release (i.e., the point where the slow-burning stage started to dominate the heat release) was much advanced compared to 90% energy release generally used to define the end of the rapid-burning stage in conventional stoichiometric spark-ignition engines. Furthermore, as the slow-burning stage was characterized by a lower flame propagation speed, a lower fuel fraction burning during this stage would increase the engine combustion efficiency. Furthermore, a more advanced phasing of the late-burning stage relative to the fast-burn stage would result in a more optimal combustion environment (i.e., higher in-cylinder pressure and temperature), which would further improve the engine efficiency and probably reduce carbon monoxide and unburned hydrocarbon emissions. As a result, this study suggests that the combustion strategy of such converted diesel engines should advance and optimize the mass of fuel that burns inside the squish region.

A Basic Behavior of Cng Di Combustion in A Spark-Ignited Rapid Compression Machine

An Experimental Investigation of Early Flame Development in an Optical Spark Ignition Engine Fueled with Natural Gas

Analysis of Two-Stage Natural-Gas Lean Combustion Inside a Diesel Geometry

A Study of the Combustion and Emission Characteristics of Compressed-Natural-gas Direct-Injection Stratified Combustion Using a Rapid-Compression-machine

Optical and Numerical Investigations of Flame Propagation in a Heavy Duty Spark Ignited Natural Gas Engine

(3-03) Feasibility of CNG DI Stratified Combustion Using a Spark-Ignited Rapid Compression Machine((AF-1)Alternative Fuels 1-Gas Engines)

Combustion Characteristics of Natural-Gas Direct-Injection Combustion under Various Fuel Injection Timings

Basic Characteristics of Direct Injection Combustion Fuelled with Compressed Natural Gas and Gasoline Using a Rapid Compression Machine

An Experimental Study of the Combustion Process in a Natural-Gas Spark-Ignition Engine

Investigation of Multistage Combustion Inside a Heavy-Duty Natural-Gas Spark-Ignition Engine Using Three-Dimensional Computational Fluid Dynamics Simulations and the Wiebe-Function Combustion Model

Twin-Peak Heat Release Phenomenon Inside a Heavy-Duty Diesel Engine Retrofitted to Natural-Gas Spark Ignition

Feasibility of CNG DI Stratified Combustion Using a Spark-Ignited Rapid Compression Machine

K-2006 A Feasibility Study of CNG Spark Ignited Stratified Combustion by Using a Rapid Compression Machine

A BASIC STUDY ON THE IGNITION POSITION OF NATURAL GAS DIRECT-INJECTION SUPER-LEAN COMBUSTION

Emission Characteristics of Direct Injection Natural Gas Engine Using Rapid Compression Machine

Effect of Fuel Injection Timing Relative to Ignition Timing on the Natural-Gas Direct-Injection Combustion

Analysis of Combustion Efficiency in Direct Injection Natural Gas Engine

No/No2 Concentration of Direct Injection Stratified Combustion under Constant Volume Condition Fuelled by Compressed Natural Gas and Gasoline

Influence Factors of Combustion Characteristics of a Low Pressure Direct Injection CNG Engine

Correlation of Ignitability with Injection Timing for Direct Injection Combustion Fuelled with Compressed Natural Gas and Gasoline

Effect of the Compression Ratio on the Performance and Combustion of A Natural-Gas Direct-Injection Engine