Abstract:Experimental, numerical and analytical methods were used to investigate the effects of the blade trailing edge thickness on the profile loss of ultrahigh-lift low-pressure turbine blades. Two cascades, the T106C and the T2, were studied. The loss obtained based on the data at the blade trailing edge plane and the plane 0.3 Chord downstream of the trailing edge agree with each other for T106C blade with and without upstream wakes at different Reynolds numbers. The blade profile losses were broken down as the suction surface boundary loss, the pressure side boundary loss and the mixing loss downstream of the trailing edge for six Reynolds numbers. Trailing edge thicknesses varying from 1.4% to 4.7% pitch were investigated at a Reynolds number of 210,000. It was found that the flow distributions across the passage at the trailing edge planes were highly nonuniform. In particular, and as a result, the trailing edge base pressure was higher than the mixed-out static pressure, so the contribution of the base pressure to the mixing loss downstream of the trailing edge plane was to reduce the loss. When the trailing edge thickness increases, there are three main effects: (1) the area with high base pressure region increases, which tends to reduce the downstream mixing loss; (2) the base pressure reduces, which tends to increase the loss; and (3) the flow diffusion downstream of the trailing edge, which tends to increase the loss. The overall result is the combined effect. For the T106C cascade, increasing the trailing edge thickness from 1.9% pitch to 2.8% pitch has a small effect on the loss. Further increasing the trailing edge thickness increases the loss. The T2 blade has a higher lift than the T106C blade, so the effects of the base pressure in reducing the mixing loss downstream of the trailing edge is more evident. The experimental results show that the profile loss first decreases and then increases as the trailing edge thickness increases. CFD, using the transition k-ω SST model and the k-ω SST model, provides good predictions of the aerodynamic performance. It was used to study the cases with trailing edge thicknesses of 1.4% pitch and 2.9% pitch. The profile loss is almost the same for these two trailing edge thickness. The results show that it is possible to use thicker blade trailing edges in low pressure turbines without aerodynamic penalty. This can lead to benefits in terms of mechanical integrity and manufacturing cost reductions.

Effects of Trailing Edge Profile and Coolant Ejection on the Loss in a Transonic Turbine Cascade

Effects of Cut-back Length and Ejection Rate of Coolant on the Flow Field in a Transonic Turbine Cascade

Influence of Trailing Edge Coolant Ejection Rate and Cut-Back Length on Energy Loss and Shockwave Intensity of a Transonic Turbine Blade

Effects of Trailing Edge Cutback on the Aerodynamic Loss of a High Load Low-Pressure Turbine Blade Cascade

Investigation On The Reduction Of Trailing Edge Shock Losses For A Highly Loaded Transonic Turbine

Effects of deflected trailing edge on the aerodynamic performance of high-lift low pressure turbine cascades

The Effects of Trailing Edge Thickness on the Losses of Ultrahigh Lift Low Pressure Turbine Blades

Profile Loss Analysis of Transonic Turbine Cascade with RANS and DDES

The Effects Of Trailing Edge Thickness On The Losses Of Ultra-High Lift Lp Turbine Blades

Investigations on Aerodynamic Performance of Turbine Cascade at Different Flow Conditions

Numerical Simulation of Influence of Leading Edge Film-Cooling on Aerodynamic Parameters in Turbine Cascade

Study on Aerodynamic Optimal Super/transonic Turbine Cascade and Its Geometry Characteristics

Numerical Investigations of the Influence of Unsteady Vane Trailing Edge Shock Wave on Film Cooling Effectiveness of Rotor Blade Leading Edge

Experimental investigations on cooling characteristics of different trailing-edge cutback geometries

Shock waves characteristics and losses estimation of non-equilibrium condensation flow in nozzle and steam turbine cascade

Cutback Squealer Tip Trailing Edge Cooling Performance

Aerodynamic Optimization and Mechanism Investigation on Performance Improvements in a Transonic Compressor Cascade

Effects of Suction Surface Near Tip Coolant Injection on the Aerodynamics of Tip Leakage Flow in a High-Pressure Turbine Cascade

Influence of key geometric parameters on the aerodynamic performance of a supersonic compressor cascade

Thermal Performance of Transonic Cooled Tips in a Turbine Cascade

Entropy Generation Rate and Proper Orthogonal Decomposition Analysis for Unsteady Flow and Losses of Turbine Vane Cutback