Abstract:C/C materials represent as materials with specific performance, therefore they are applied in various industries. It is essential to figure out the paths to predict, to provide and to enhance their properties to obtain high performance products. It is well known that strong matrix/reinforcer adhesion provides better strength utilization and therefore better properties for the majority of composite materials of all types (Heim in Compos Part B Eng 54:365–370, 2013), (Hancock and Cuthbertson in J Mater Sci 5:762–768, 1970), (Yang et al. in Polymers 13:2764, 2021). However some researchers note that strong adhesion in the materials that are exposed to high temperatures leads to cracking and significant properties degradation (Vignoles et al. in The Control of interphases in carbon and ceramic matrix composites, Wiley, Hoboken, 2012), (Zhang et al. in Compos Struct 340, 2024). In this work, the effect of the pyrocarbon layer applied on the surface of carbon fibers used for reinforcement of formaldehyde novolac resin based carbon/carbon (C/C) material prepregs was investigated. For the first time we used this effect to prove that lower matrix/reinforcer adhesion in C/C materials prepregs leads to better material behavior during pyrolysis, which results in higher mechanical properties of the pyrolised samples in comparison with the samples demonstrating stronger matrix/reinforcer adhesion. The prepregs were thermally treated at various temperatures, the physical and mechanical performance evolution of the prepregs at different carbonization stages were analyzed. Comparative study of the features of the prepregs with pyrocarbon coated and uncoated carbon fiber as a reinforcement were carried out. The damping effect of the pyrocarbon on the fiber surface were advertised, allowing to mitigate the carbonization-caused effects. The prepregs reinforced with pyrocarbon-modified carbon fibers demonstrated lower cracking performance and higher mechanical performance comparing with the uncoated fiber reinforced prepregs.

PREPARATION OF ACTIVATED CARBON FORM II. ROLES OF ACTIVATED CARBONS ON THE STRENGTH OF ACTIVATED CARBON FORM USING A THERMOPLASTIC POLYMER AS BINDER

Preparation of an Activated Carbon Artifact: Factors Influencing Strength when Using a Thermoplastic Polymer As Binder

Preparation and Electrochemical Properties of PF-based Activated Carbon

Control of Nano Grains and Wide Carbocyclic Layer Space of Forming Active Carbon with Extraordinary Capacitance Characteristics in Supercapacitors

Preparation of an Activated Carbon Artifact: Oxidative Modification of Coconut Shell-Based Carbon to Improve the Strength

Manufacturing Options for Activated Carbons with Selected Synthetic Polymers as Binders

An activated carbon with high capacitance from carbonization of a resorcinol–formaldehyde resin

Preparation of Spherical Activated Carbon and Their Physicochemical Properties

Preparation and Absorption Characteristics of SAC

Preparation of Phosphate-activated Carbon from the Coconut Fibers

Cottonseed meal derived porous carbon prepared via the protease pretreatment and reduced activator dosage carbonization for supercapacitor

Effect of Molding Conditions on the Pore Structure of Activated Carbon and Its CO2 Adsorption Performance

Production of Porous Carbon by the Synergistic Chemical and Physical Activations and its Capacitive Performance

Preparation of Nitrogen-containing Activated Carbon from Waste Medium Density Fiberboard for Electric Double Layer Capacitor

Preparation of hyper-crosslinked polymer derived porous carbon and its electrochemical properties

Reinforcement of C/C materials prepregs with pyrocarbon coated carbon fiber as the way to improve the prepregs properties after pyrolysis

Preparation and Characterization of Polymer-Based Spherical Activated Carbons

Fabrication and Evaluation of Mesoporous Poly(vinyl Alcohol)-Based Activated Carbon Fibers

Changes in properties and mechanism of poly(p-phenylene terephthalamide) activated carbon paper prepared by different activation methods

Preparation and Characterization of Nano-Caco3 Encapsulated with Polyacrylic and Its Application in Pvc Toughness

Nontemplating Porous Carbon Material from Polyphosphamide Resin for Supercapacitors.