Abstract:High concentration coal water slurry (CWS) is a new type of coal based liquid fuel developed and applied to replace oil for direct use in industry since the mid-seventies. Industrial tests of coal water slurry combustion in the 20 tons per hour steam output and 60 tons per hour steam output oil fired boilers have been carried out since 1981 in China. Nowaday, a project of burning coal water slurry in the 230 T/H utility boiler in Baiyanghe power plant has been made and several of the retrofit works have been done. This is the first time in this country. The boiler was originally designed based on burning coal. Actually, it keeps on burning oil. It has a cross-section of high length-width ratio (the long-side and short-side are 10.1 m and 7.15 m respectively, the ratio is 1/1.3). Based on the demand of power plant authority and the particularity of boiler construction, the CWM burners must be arranged on two side walls which are shorter than the front and rear wall. As we know, the length-width ratio of cross-section in a tangential fired furnace is generally suggested to be no more than 1/1.25. However, the ratio of this furnace hasmore » already been 1/1.3. If calculating in terms of burner-located points on furnace walls, the length-width ratio is 1/2.13. This obviously contradicts with general suggestion. No furnace aerodynamic information about this arrangement can be found. This arrangement will cause easily the deflection and impingement of the airflow, and it is difficult to form a good airflow distribution. So the retrofitting and design of the burner on the old boiler are very important. For this purpose, the experimental researches in two cold model facilities were carried out carefully. The experimental projects reported in this paper include the aerodynamic characteristic of two shape burners.« less

Characteristic and Research Progress on W Flame Boiler with Swirl Burners

Experimental and Numerical Study of a Two-Stage Swirl Burner

Research and application on new type split direct flow burner in W-flame boiler

Experimental Study And Numerical Simulation On A Novel Structure Of Dual Register Whirl Burner

97/03976 Researches on the aerodynamic characteristics of CWS tangentially arranged burners in utility boilers

Theoretical and In-situ Experimental Investigation on Reducing Slagging Damage for Swirl-opposed Fired PC Boiler with Non-designed Blending Coals

ANALYSIS OF DESIGN FOR SWIRLING PULVERIZED COAL BURNERS WITH LOW NOx EMISSION

STUDY ON FUEL BIAS COMBUSTION SWIRL TECHNOLOGY OF A 1025t/h PULVERIZED COAL FIRED BOILER

Hot-State Experimental Study of the W-Shape Flame

Experimental Study of the Cold-state Aerodynamic Characteristics of a W-shaped Flame Boiler

Numerical Simulation of Swirl Burners for 135t/h Boiler

Study on a New Swirling Coal Combustion Technique for Large Capacity Boilers

Experimental Study of Aerodynamic Characteristics in a W-shaped Flame Boiler Equipped with a Bin and Feeder System aud Fed Tertiary Hot Air in the Boiler Furnace

Research on Industrial Boilers Flame Patterns

Impact of High-Velocity Primary Air on Combustion and NO X Emission Performance of a Novel Swirling W-shaped Boiler: A Numerical Simulation Combined with Industrial Experiment Verification

Technology Analysis and Performance Comparison Between Tangentially-fired Burner and Swirl Burner in Large Capacity Utility Boilers

High Efficient and Low NOx Centrally Fuel Rich Swirl Burner with Multi-stage Combustion Technology

Experiment study on turbulence characteristics in burning region of boiler with burners on-wall arrangement

Experimental and Numerical Simulation Research on Flow, Combustion and NOx Formation of a New Swirling Arch-Fired Boiler

Experimental Study of Aerodynamic Characteristics in a W-shaped Flame Boiler Equipped with a Bin and Feeder System and Fed Tertiary Hot Air in the Boiler Furnace

DEBUGGING OF A 1025t/h W-SHAPED FLAME BOILER IN SHAOGUAN POWER PLANT