Abstract:This paper presents a numerical study on the influences of gas composition and properties on the combustion and heat transfer characteristics of pulverized oxy-coal boiler. Previous studies were primarily focused on impacts of gas mass flow rate under different flue gas recirculation (FGR) rates while the important influences of gas composition and physical properties were overlooked. The results show that the changes in the gas composition and physical properties under different combustion modes, such as density, heat capacity and gas absorption coefficient, can significantly affect the flow, temperature, and heat transfer distributions in the furnace. Specifically, due to the differences in the heat capacities of CO2, H2O and N2, the gas heat capacity of oxy-coal combustion is considerably higher than that of air-coal combustion. As a result, oxy-coal combustion attains furnace temperature comparable to that of air-coal combustion at remarkably lower gas mass flow rate. Moreover, because of the differences in the radiation properties of CO2, H2O and N2, the gas absorption coefficient of oxy-coal combustion is higher than that of air-coal combustion, especially at the near-wall region, which hinders the radiation heat transfer between the high temperature flame and furnace wall. Consequently, oxy-coal combustion needs higher furnace temperature at further lower gas mass flow rate to achieve matched wall heat absorption with that of air-coal combustion. Therefore, the differences in the gas composition and physical properties under different combustion modes need to be comprehensively considered in the design of oxy-coal combustion systems or retrofit of existing air-coal combustion systems.

Research on Industrial Boilers Flame Patterns

Study of an Improved Two-Colour Method Integrated with the Emissivity Ratio Model and Its Application to Air- and Oxy-Fuel Flames in Industrial Furnaces

Study on Flame Characteristics in Aerosols by Industrial Heat Transfer Fluids

Study on the Flame Monitoring and Combustion Diagnosis Control Optimizing Inside Pulverized Coal Boiler of Power Plant

Investigations into the Ignition Behaviors of Pulverized Coals and Coal Blends in a Drop Tube Furnace Using Flame Monitoring Techniques

Numerical Simulation Of The Combustion Processes In A W-Shaped Boiler Furnace Under Different Operating Conditions

A Brief Review of the Combustion Diagnosing Techniques for Coal-Fired Boilers of Power Plants in China

Characteristic and Research Progress on W Flame Boiler with Swirl Burners

Optimization Research On The Power Boiler Furnace Performance Design Method

Systematic numerical simulation and experimental study of gas-solid two-phase flow, heat transfer and combustion in W-shape flame boiler furnace

Numerical Simulation of Combustion in 35 t/h Industrial Pulverized Coal Furnace with Burners Arranged on Front Wall

Properties of Impinging Flames in Entrained-Flow Gasifier with Opposed Multi-Burner

An Analysis of Flame Signals in a Boiler Furnace Based on a Phase Space Reconstruction

Influence of gas composition and properties on the combustion and heat transfer characteristics of pulverized oxy-coal boiler

STUDY ON SECTION TEMPERATURE MEASUREMENT OF POWER PLANT BOILER BASED ON FLAME IMAGE

Numerical Study on Heat Transfer and Combustion Characteristics of Gas-fired Boiler under Different Loads

Application Research of Combustion System for Medium and Small Sized Boilers

Experimental Study on Temperature, Heat Flux, Strain and Stress Distribution of Boiler Water Walls

In-furnace Flue-gas Flow Characteristics and Selection of Furnace Height for a Tangentially Fired Boiler

Numerical investigation of heat transfer characteristics in utility boilers of oxy-coal combustion

Quantitative Assessment of Flame Stability Through Image Processing and Spectral Analysis