Effect of Additive on the Ignition, Combustion, and Emissions for HCCI Engine Fueled with High RON Fuels

U Xing-cai,CHEN Wei,HUANG Zhen
DOI: https://doi.org/10.3321/j.issn:1006-8740.2005.03.009
2005-01-01
Abstract:The effects of the Di-tertiary butyl peroxide (DTBP) additive on the heat release rate, ignition timing, combustion duration, and emissions of HCCI engine fueled with high research octane number (RON) fuels were investigated. The experiments were performed using 0, 1% 2%, 3%, and 4% (by volume) DTBP-RON90 blends. The RON90 fuel were obtained by blending 90% iso-octane with 10% n-heptane. The Combustion and emission features of 5 fuel at different (1 800 r/min) loads were examined.The experimental results show that without addictive in RON90, HCCI combustion is only possible within the high temperature and high engine load range oporation. The operation range is remarkably extended to lower temperature and lower engine load with a small amount of DTBP additive in RON90 fuel.For all fuels at different engine working conditions, the first ignition phase of HCCI combustion was observed at 850 K, ended at 950 K, and the hot ignition occurred at 1 125 K. The chemical reaction scale time shortens with the increase of DTBP. Therefore the ignition timing advances, the combustion duration shortens, and the combustion efficiency improves at lower engine load. Meanwhile, the UHC and CO emissions decreased sharply with the DTBP addition, while the NO_x emissions remain at a lower level.
What problem does this paper attempt to address?