Abstract:Hydrogen and n-butanol are superior alternative fuels for SI engines, which show high potential in improving the combustion and emission characteristics of internal combustion engines. However, both still have disadvantages when applied individually. N-butanol fuel has poor evaporative atomization properties and high latent heat of vaporization. Burning n-butanol fuel alone can lead to incomplete combustion and lower temperature in the cylinder. Hydrogen is not easily stored and transported, and the engine is prone to backfire or detonation only using hydrogen. Therefore, this paper investigates the effects of hydrogen direct injection strategies on the combustion and emission characteristics of n-butanol/hydrogen dual-fuel engines based on n-butanol port injection/split hydrogen direct injection mode and the synergistic optimization of their characteristics. The energy of hydrogen is 20% of the total energy of the fuel in the cylinder. The experimental results show that a balance between dynamics and emission characteristics can be found using split hydrogen direct injection. Compared with the second hydrogen injection proportion (IP2) = 0, the split hydrogen direct injection can promote the formation of a stable flame kernel, shorten the flame development period and rapid combustion period, and reduce the cyclic variation. When the IP2 is 25%, 50% and 75%, the engine torque increases by 0.14%, 1.50% and 3.00% and the maximum in-cylinder pressure increases by 1.9%, 2.3% and 0.6% respectively. Compared with IP2 = 100%, HC emissions are reduced by 7.8%, 15.4% and 24.7% and NOx emissions are reduced by 16.4%, 13.8% and 7.9% respectively, when the IP2 is 25%, 50% and 75%. As second hydrogen injection timing (IT2) is advanced, CA0-10 and CA10-90 show a decreasing and then increasing trend. The maximum in-cylinder pressure rises and falls, and the engine torque gradually decreases. The CO emissions show a trend of decreasing and remaining constant. However, the trends of HC emissions and NOx emissions with IT2 are not consistent at different IP2. Considering the engine's dynamics and emission characteristics, the first hydrogen injection proportion (IP1) = 25% plus first hydrogen injection timing (IT1) = 240°CA BTDC combined with IP2 = 75% plus IT2 = 105°CA BTDC is the superior split hydrogen direct injection strategy.

Effects of second hydrogen direct injection proportion and injection timing on combustion and emission characteristics of hydrogen/n-butanol combined injection engine

Synergic effect of hydrogen and n-butanol on combustion and emission characteristics of a hydrogen direct injection SI engine fueled with n-butanol/gasoline

Study on Combustion and Emission Characteristics of a N-Butanol Engine with Hydrogen Direct Injection under Lean Burn Conditions

An Experimental Study on Combustion and Cycle-by-Cycle Variations of an N-Butanol Engine with Hydrogen Direct Injection under Lean Burn Conditions

Experimental Study on the Impact of Hydrogen Injection Strategy on Combustion Performance in Internal Combustion Engines

Study of Single and Split Injection Strategies on Combustion and Emissions of Hydrogen DISI Engine

Experimental Study on the Effects of Hydrogen Injection Strategy on the Combustion and Emissions of a Hydrogen/Gasoline Dual Fuel SI Engine under Lean Burn Condition

Effect of direct injection of small amounts of ethanol on port-injected hydrogen internal combustion engines

Effects of hydrogen injection strategy on the hydrogen mixture distribution and combustion of a gasoline/hydrogen SI engine under lean burn condition

Effect of Injection Strategy on the Hydrogen Mixture Distribution and Combustion of the Hydrogen-Fueled Engine with Passive Pre-Chamber Ignition under Lean Burn Condition

Comprehensive Comparison of Single-Stage and Novel Two-Stage Hydrogen Direct Injection Strategies on the Combustion and Thermodynamic Performance of X-type Rotary Engine Using Gasoline-Hydrogen Fuel

Effects of Split Direct-Injected Hydrogen Strategies on Combustion and Emissions Performance of a Small-Scale Rotary Engine

Performance of a Hydrogen-Blended Gasoline Direct Injection Engine under Various Second Gasoline Direct Injection Timings

Split injection strategies for a high-pressure hydrogen direct injection in a small-bore dual-fuel diesel engine

Numerical investigation on gaseous fuel injection strategies on combustion characteristics and NO emission performance in a pure hydrogen engine

Simulation Study of the Effect of Nozzle Position and Hydrogen Injection Strategy on Hydrogen Engine Combustion Characteristic

Effect of Timing Strategy on Mixture Formation, Performance and Emission of Inlet Injection Hydrogen Engine

Effect of Fuel Injection Timings and Hydrogen Fraction on Combustion Characteristics of Direct-Injection Engine

Effect of ignition timing and hydrogen fraction on combustion and emission characteristics of natural gas direct-injection engine

An Experimental Study of the Injection Strategies on Engine Performance of the Butanol/biodiesel Dual-Fuel Intelligent Charge Compression Ignition Mode

Study on the effect of injection strategy on the combustion and emission characteristics of direct injection spark ignition bio-butanol engine