Abstract:Parabolic trough collector is the most mature and widely deployed concentrated solar power technology with temperature ranging from 325 to 700 K. In this study, three different absorber tube geometries (smooth absorber tube, absorber tube with twisted tape insert and tube with longitudinal fins) of commercially available LS-2 collector are modeled and investigated using engineering equation solver. The objective of this study is to present a numerical comparative analysis of the available thermal enhancement techniques. Comprehensive energetic and exergetic performance of different tube geometry configurations using Al 2 O 3 /water as a heat transfer fluid has been compared to assess the nature of exergy destruction due to the fluid’s pressure, due to the heat transfer between sun and the receiver wall and due to the temperature difference between receiver wall and heat transfer fluid temperature. Furthermore, pure base fluid (water) along with the nanofluid is used to evaluate the system’s performance (thermal efficiency, exergetic efficiency, heat transfer coefficient, receiver temperature, pressure drop, pumping work demand and friction factor). Smooth absorber tube with pure base fluid is the reference case, while five cases (smooth tube with nanofluid, tube with pure water and fins inserted, tube with nanofluid and fins inserted, tube with pure water and twisted tape inserted, tube with nanofluid and twisted tape inserted) are investigated. Thermal efficiency of absorber tube with twisted tape insert and nanofluid is almost 72.26%, followed by tube with internal fins (72.10%), while smooth absorber tube has nearly 71.09%. Heat transfer coefficient of twisted tape inserted tube with nanofluid and longitudinal fins tube with nanofluid is greater than smooth absorber tube to almost 118.23% and 103.26%, respectively. The emphasis is also given to the pressure drop of the examined cases as it depends up on the friction factor of the absorber tubes. The use of nanofluid and twisted tape inserts leads to higher thermal enhancement, followed by the nanofluid and internal fins inserted tube. The nanoparticle concentration is also varied to investigate its effect on different performance parameters of the system.

Study on Thermal Performance of Non-Selective Absorption Coating Part for Metal Straight-Through Receiver

Performance Study and Comparative Analysis of Traditional and Double-Selective-coated Parabolic Trough Receivers

Thermal performance analysis of eccentric double-selective-coated parabolic trough receivers with flat upper surface

An optimized model and test of the China’s first high temperature parabolic trough solar receiver

Performance Analysis on a High-Temperature Solar Evacuated Receiver with an Inner Radiation Shield

A Detailed Nonuniform Thermal Model of A Parabolic Trough Solar Receiver with Two Halves and Two Inactive Ends

Numerical Investigation and Experimental Validation of the Impacts of an Inner Radiation Shield on Parabolic Trough Solar Receivers

Comparative performance assessment of different absorber tube geometries for parabolic trough solar collector using nanofluid

Energetic and Exergetic Analyses on Structural Optimized Parabolic Trough Solar Receivers in a Concentrated Solar–thermal Collector System

Heat Loss Testing and Regression of Parabolic Trough Solar Receiver

Spectral-spatial Design and Coupling Analysis of the Parabolic Trough Receiver

A spectral self-regulating parabolic trough solar receiver integrated with vanadium dioxide-based thermochromic coating

Three-dimensional Numerical Study of Heat Transfer Characteristics in the Receiver Tube of Parabolic Trough Solar Collector

Study On Trough Receiver For Linear Concentrating Solar Collector

Heat transfer performance enhancement and thermal strain restrain of tube receiver for parabolic trough solar collector by using asymmetric outward convex corrugated tube

Improving overall heat transfer performance of parabolic trough solar receiver by helically convex absorber tube

Numerical Study on Thermal Performance of a Solar Cavity Receiver with Different Depths

Experimental and simulated performance of hot mirror coatings in a parabolic trough receiver

Techno-economic Assessment of Performance-Enhanced Parabolic Trough Receiver in Concentrated Solar Power Plants

Thermal-hydraulic performance analysis of a novel parabolic trough receiver with double tube for solar cascade heat collection

Performance Simulation of a Parabolic Trough Solar Collector