Abstract:In order to improve the capacitive properties of TiO2 materials for supercapacitors, the carbon-modified TiO2 (denoted as C-TiO2) composite films was synthesized by gas thermal penetration of pure Ti plate with methanol as the drop agent under the temperature of 550 degrees C. The structure and composition of CTiO2 was investigated by SEM, XRD, RAMAN, XPS and XANES. The electrochemical performance of C-TiO2 was evaluated by electrochemical impedance spectra (EIS), cyclic voltammetry (CV) and galvanostatic charge/discharge (GCD) tests. Results show that the film is composed of a large amount of rutile TiO2 and a little anatase TiO2, and meantime the carbon is deposited on the film through the methanol decomposition during the gas thermal penetration, which greatly influences the electrochemical properties of the composite films. The prepared C-TiO2 yields the largest specific capacities of 47.46 mC cm (2) at the scan rate of 10 mV s (1) based on the CV curves, and 7.35 mC cm (2) at the current density of 0.075 mA cm (2) based on the galvanostatic charge/discharge curves, which compares favorably with many other similar modified TiO2 film materials reported nowadays. The excellent large charge storage properties of C-TiO2 films are attributed to the deposition of a certain amount of graphitized carbon and organic carbon containing hydroxyl groups and carbanyl groups and the formation of Ti3+ in the form of TiO1.5 under methanol reductive atmosphere be means of the improvement of the pseudocapacitance property and the conductivity of the composite films. (C) 2017 Elsevier Ltd. All rights reserved.

The electrochemical characteristics of activated carbon modified by nano-TiO2 as the supercapacitor electrode

Control of Nano Grains and Wide Carbocyclic Layer Space of Forming Active Carbon with Extraordinary Capacitance Characteristics in Supercapacitors

Activated Carbon Modified by CNTs/Ni-Co Oxide As Hybrid Electrode Materials for High Performance Supercapacitors

Nanosized Fe 3 O 4 -Modified Activated Carbon for Supercapacitor Electrodes

Coal Tar Residues-Based Nanostructured Activated Carbon/fe3o4 Composite Electrode Materials for Supercapacitors

Thermally oxidized activated carbon with high specific surface area to boost electrochemical performance for supercapacitor

Microstructure and Electrochemical Performance of Supercapacitor Based on Nickel/Activated Carbon Composite Electrode

The enhanced performance of TiO2 nanoparticle supercapacitor via electrochemical post-processing

Activation Mechanism Study of Dandelion-Like Co9s8 Nanotubes in Supercapacitors

Integrating carbon nanotube into activated carbon matrix for improving the performance of supercapacitor

Capacitor performance of TiO2/C composite electrode

Covalently Coupled Ultrafine H-TiO2 Nanocrystals/Nitrogen-Doped Graphene Hybrid Materials for High-Performance Supercapacitor.

Synthesis of Carbon Modified TiO2 Nanotubes Composite Films by Gas Thermal Penetration As Symmetrical and Binder-Free Electrochemical Supercapacitor

Electrochemical Capacitance Performance of Hybrid Supercapacitors Based on Ni(OH)[sub 2]∕carbon Nanotube Composites and Activated Carbon

Enhanced electrochemical performance of porous activated carbon by forming composite with graphene as high-performance supercapacitor electrode material

Supercapacitor electrode based on ternary activated carbon/CuCoO 2 hybrid material

Electrochemical Behavior of Activated-Carbon Capacitor Material Loaded with Nickel Oxide

Electrochemical properties of MnO2/activated carbon nanotube composite as an electrode material for supercapacitor

A One-Step Preparation and Enhanced Electrochemical Properties of C-TiO2 Composite Films

Preparation and electrochemical properties of PEDOT/AC composites electrodes for supercapacitors

Hydrogenated TiO2 Nanotube Arrays for Supercapacitors.