Abstract:The low performance of electrode materials is the main obstacle limiting the development of the supercapacitor industry, which can be solved by doping cobalt ferrate nanoparticles (NPs) with carbon materials. Herein, the composites of CoFe2O4 based on activated carbon (AC) were successfully prepared using a one-step solvothermal method and subsequently applied in anodes of battery-type asymmetrical supercapacitors. The effect of solvothermal temperature and heating time on the composite characteristic was systematically evaluated. The electrochemical analysis in the three-electrode system revealed that modified activated carbon heated at 140 °C for 24 h (140MAC24) displayed excellent specific capacitance of 571.36 F/g at the current density of 0.2 A/g due to the synergistic effect of the double-layer and faradic capacitance. Moreover, iron and cobalt elements in CoFe2O4 could change into the oxide form to accelerate charge in potential range window of -1.0 to -0.2 V and discharge from -0.2 to 0.2 V, respectively. Meanwhile, the result of assessing economic feasibility suggested the splendid availability of 140MAC24 electrodes. Additionally, the assembled supercapacitor displayed the outstanding specific capacitance of 171.31 F/g in the potential window of 1.8 V, energy density of 43.5 Wh/kg at the current density of 0.2 A/g, and capacitance retention rate of 82.49% after 10,000 cycles. The excellent electrochemical properties demonstrated that CoFe2O4 could be used as a bifunctional agent for enhancing supercapacitive performance.

Nanosized Fe 3 O 4 -Modified Activated Carbon for Supercapacitor Electrodes

Mn0.5co2.5o4 Nanofibers Sandwiched in Graphene Sheets for Efficient Supercapacitor Electrode Materials

Coal Tar Residues-Based Nanostructured Activated Carbon/fe3o4 Composite Electrode Materials for Supercapacitors

N-Doped Porous Carbon-Nanofiber-Supported Fe3C/Fe2O3 Nanoparticles as Anode for High-Performance Supercapacitors

CoFe2O4 Nanoparticles As a Bifunctional Agent on Activated Porous Carbon for Battery-Type Asymmetrical Supercapacitor

Synergistic Effect of Fe3O4/reduced Graphene Oxide Nanocomposites for Supercapacitors with Good Cycling Life

Activated Carbon Modified by CNTs/Ni-Co Oxide As Hybrid Electrode Materials for High Performance Supercapacitors

Nitrogen-doped carbon boosting Fe2O3 anode performance for supercapacitors

Nitrogen‐Doped Porous Graphene Coated with Fe3O4 Nanoparticles for Advanced Supercapacitor Electrode Material with Improved Electrochemical Performance

Fe2O3 Embedded in N-Doped Porous Carbon Derived from Hemin Loaded on Active Carbon for Supercapacitors

Study on Electrochemical Performance of Multi-Wall Carbon Nanotubes Coated by Iron Oxide Nanoparticles As Advanced Electrode Materials for Supercapacitors

Reduced Graphene Oxide-Cofe2o4 Composites for Supercapacitor Electrode

High Performance Asymmetric Supercapacitor Based on Cobalt Nickle Iron-layered Double Hydroxide/carbon Nanofibres and Activated Carbon

Preparation and electrochemical properties of nanofiber poly(2,5-dihydroxyaniline)/activated carbon composite electrode for supercapacitor

Ultrathin Nanoporous Fe3O4–carbon Nanosheets with Enhanced Supercapacitor Performance

Electrospinning Preparation of Fe3O4/Porous Carbon Nanofibres for Use As Supercapacitor Electrode Materials

Bioenzyme Activation Preparation of Fe3O4/carbon Nanofibers As Supercapacitor Electrode Materials

Fe3O4@Carbon Nanosheets for All-Solid-State Supercapacitor Electrodes

V2O3 Nanofoam@activated Carbon Composites As Electrode Materials of Supercapacitors

Preparation and supercapacitive properties of Fe2O3/active carbon nanocomposites

Hybrid Α-Fe2o3@ni(oh)2 Nanosheet Composite for High-Rate-performance Supercapacitor Electrode.