Abstract:LiCoO2‐based materials are well‐known cathode materials used in lithium ion batteries. Moreover, these materials are currently utilized in low‐temperature proton‐conducting solid oxide fuel cells (SOFCs). Various dopants, such as Mn, Sr, and Zn, are introduced into LiCo2‐based materials to improve their properties and performance for proton‐conducting SOFC applications. In this regard, Mn‐, Sr‐, and Zn‐doped LiCoO2 and LiCo0.6X0.4O2 (X = Mn, Sr, or Zn) powders are synthesized via the glycine‐nitrate combustion method. Their properties are characterized using different techniques. The precursor cathode powder is dried at 100°C and subjected to thermogravimetric analysis (TGA). The phase formation and morphology of calcined LiCo0.6Mn0.4O2 (LCMO), LiCo0.6Sr0.4O2 (LCSO), and LiCo0.6Zn0.4O2 (LCZO) powders at 600°C to 700°C are examined via X‐ray diffraction. At 600°C, both calcined LCSO and LCZO powders show few secondary phases, but these phases greatly decrease as calcination temperature increases to 700°C. By contrast, calcined LCMO powders exhibit a single phase structure at both calcination temperatures of 600°C and 700°C. The measured crystallite sizes of LCMO, LCSO, and LCZO powders are 23.32 ± 0.20, 21.08 ± 0.72, and 21.24 ± 0.32 nm, respectively. TEM images indicate that the particles in LCMO and LCZO powders highly agglomerate compared with those in LCZO powders. This result confirms that LCSO cathodes have the highest electrical conductivity (356.66 S cm−1) and the lowest area specific resistance (0.29 Ω cm2 in humidified [3%] air) at 700°C. In conclusion, LCSO materials are the best cathodes with high potential for proton‐conducting SOFC applications.

Conductivity of Cathode Materials for Molten Carbonate Fuel Cell

Novel Doped Barium Cerate–carbonate Composite Electrolyte Material for Low Temperature Solid Oxide Fuel Cells

Electrochemical properties of Ml(NiCoMnCu)5 used as an alkaline fuel cell anode

Improved Ionic Transport Using a Novel Semiconductor Co0.6Mn0.4Fe0.4Al1.6O4 and Its Heterostructure with Zinc Oxide for Electrolyte Membrane in LT-CFCs

Mechanism for Major Improvement in SOFC Electrolyte Conductivity When Using Lithium Compounds as Anode

Development of Novel Low-Temperature SOFCs with Co-Ionic Conducting SDC-carbonate Composite Electrolytes

Preparation and Property of LSGM-Carbonate Composite Electrolyte for Low Temperature Solid Oxide Fuel Cell

Enhanced Proton Conductivity and CO2-tolerance of Intermediate-Temperature Protonic Ceramic Fuel Cell with Lanthanum Tungstate-Based Composite Cathode

Electrode materials for intermediate temperature proton-conducting fuel cells

Fabrication and Performance of La, Co-Substituted SrTiO3 As Cathode Materials of Solid Oxide Fuel Cell

Nickel‐Regulated Composite Cathode with Balanced Triple Conductivity for Proton‐Conducting Solid Oxide Fuel Cells

Enhanced performance of lithiated cathode materials of LiCo 0 . 6 X 0 . 4 O 2 (X = Mn, Sr, Zn) for proton‐conducting solid oxide fuel cell applications

Effect of cobalt and magnesium doping on the performance of Ba0.5Sr0.5Fe0.8O3 cathode for solid oxide fuel cell applications

Investigation of La2NiO4+δ-based Cathodes for SDC–carbonate Composite Electrolyte Intermediate Temperature Fuel Cells

Performance and optimization of perovskite-type La1·4Ca0·6CoMnO5+δ cathode for intermediate-temperature solid oxide fuel cells

Metallic Interconnect Materials Used in Solid Oxide Fuel Cell

Cathode Performance as a Function of Inactive Material and Void Fractions

Improved electrochemical performance of a LiCoO 2 /MCMB cell by regulating fluorinated electrolytes

Carbonate-Based Lanthanum Strontium Cobalt Ferrite (LSCF)–Samarium-Doped Ceria (SDC) Composite Cathode for Low-Temperature Solid Oxide Fuel Cells

A New Candidate As the Cathode Material for Intermediate and Low Temperature Sofcs

Composite Electrolyte Based On Nanostructured Ce0.8sm0.2o1.9 (Sdc) For Low-Temperature Solid Oxide Fuel Cells