Numerical Simulation on Multiple Physical Fields Behaviors in Billet Continuous Casting with Different Stirrer Positions
Xin Wang,Shu-guo Zheng,Zong-hui Liu,Miao-yong Zhu
DOI: https://doi.org/10.1002/srin.201900415
IF: 2.1258
2019-10-07
steel research international
Abstract:<p>A 3‐D coupled model considering electromagnetic field, flow field, heat transfer, particle transport is developed to predict the effect of stirrer position on the magnetic field distribution, fluid flow streamlines, temperature distribution and inclusion removal in 180 mm× 220 mm billet continuous casting process, and the effect of stirrer position on the mold level fluctuation and slag entrapment behavior is also studied based on the homogeneous model. The casting temperature of molten steel is 1750 K, and the casting speed of billet is 0.9 m/min. The results indicate that as the stirrer center position is lowered, the maximum value of the magnetic induction intensity has almost no change, while the maximum value of the tangential electromagnetic force initially decreases followed by an increase. With the downward movement of stirrer center position, the decrease rate of central molten steel velocity slows down, and the range of the upper circulation flow zone increases. A lower stirrer center position increases the cooling of the billet, especially for the region near top surface. When the stirrer center position is moved from 515 mm to 815 mm, the removal ratio of inclusions increases, and the wave height of steel/slag interface decreases from 11.6 mm to 3.4 mm. A lower stirrer center position weakens the phenomenon of slag entrapment. Owing to the rotating flow of molten steel, the slag in the billet is mainly distributed at shell side rather than the billet center.</p><p>This article is protected by copyright. All rights reserved.</p>
metallurgy & metallurgical engineering