Abstract:Sn-Cu based solders have been widely investigated due to their good mechanical properties, good fluidity, narrow melting range, environmental friendliness, and low price. In this paper, the effect of Ni content on the microstructure, mechanical properties, melting behavior, spreadability, and conductivity of Sn-0.7 Cu-xNi (0.5-2.0 mass%, mass fraction except when specified) lead-free solders was studied. The Sn-0.7Cu-xNi (x = 0.5, 1.0, 1.5, and 2.0) solder alloys consisted of a β-Sn solid solution, Ni3Sn4 phase, and Cu6Sn5 phase. The volume fraction of Ni3Sn4 increased with increasing Ni content. The addition of Ni increased the solidus and liquidus temperatures of the Sn-0.7Cu-xNi solder alloys. However, the melting range of the Sn-0.7Cu-0.5Ni and Sn-0.7Cu-1.0Ni solder alloys is lower than that of the Sn-0.5Cu solder alloy. The spreading area of the Sn-0.7Cu-xNi solder alloy first increased and then decreased with increasing Ni content. Moreover, the ultimate tensile strength and hardness of the Sn-0.7Cu-xNi solder alloy increased gradually with increasing Ni content. The Sn-0.7Cu-2.0Ni alloy has maximum ultimate tensile strength and hardness values of 52.01 MPa and 16.45 Hv, respectively. However, the electrical conductivity of the Sn-0.7Cu-xNi solder alloy decreased with increasing Ni content. These changes in performance related to the formation of the intermetallic Ni3Sn4 phase. The Sn-0.7Cu-1.0Ni solder alloy had the best comprehensive performance in the present experiment. For the Sn-0.7Cu-1.0Ni solder alloy, the expanded area was 1.28 times that of the Sn-0.7Cu alloy, and the liquidus temperature, melting range, strength, hardness, and resistivity of the alloy solder were at the intermediate level among the Sn-0.7Cu-xNi solder alloys. Therefore, the Sn-0.7Cu-1.0Ni alloy is a relatively ideal solder alloy with a good comprehensive performance among the Sn-0.7Cu-xNi solder alloys.

Effects of Addition Small Amount High Melting Point Metal on Properties of Lead-free Solders

Effect of Alloy Element on Microstructure and Impact Toughness of Sn-57Bi Lead-free Solders

Effect of Ag, Ni and Bi Additions on Solderability of Lead-Free Solders

Effect of Small Additions of Alloying Elements on the Properties of Sn-Zn Eutectic Alloy

Effects of Alloying Elements on the Characteristics of Sn-Zn Lead-Free Solder

Properties and Microstructures of Sn-Ag-Cu-X Lead-Free Solder Joints in Electronic Packaging

Intermetallic compound evolution and mechanical properties of Sn-0.7Cu-0.1Ni-xZn lead-free solder alloys prepared by directional solidification

Effect of in Addition on the Microstructure and Mechanical Properties of Sn-0.7Cu-0.8Zn/Cu Solder Joints

Coupled effect of Ag and In addition on the microstructure and mechanical properties of Sn–Bi lead-free solder alloy

Thermal Property, Wettability and Interfacial Characterization of Novel Sn–Zn–Bi–In Alloys As Low-Temperature Lead-Free Solders

Effect of Ni Content on the Microstructure Formation and Properties of Sn-0.7Cu-xNi Solder Alloys

Study of New Types Lead-Free Solder Alloys of Sn-Ag-Cu-Al-Ni and Sn-Zn-Bi-In-P

Robust effects of In, Fe, and Co additions on microstructures, thermal, and mechanical properties of hypoeutectic Sn–Zn-based lead-free solder alloy

Study on Melt Properties, Microstructure, Tensile Properties of Low Ag Content Sn–Ag–Zn Lead-free Solders

Microstructural, thermal and mechanical properties of Co added Sn–0.7Cu lead-free solder alloy

Effects of Bi and Cu addition on mechanical properties of Sn9Zn alloy and interfacial intermetallic growth with Ni substrate

Effect of Cu Content on Performance of Sn-Zn-Cu Lead-Free Solder Alloys Designed by Cluster-Plus-Glue-Atom Model

Effects of Multiple Reflows on Sn3.8Ag0.7Cu-xNi/Ni Solder Joints

Effect of alloying elements on microstructural and electrical property in Sn–Cu–Bi lead-free solder alloys

Effects of Ga addition on the microstructure and mechanical performance of Sn-58Bi based alloys and the solder joints

Finite Element Analysis of SnAgCu(Zn, Co, Fe) Lead-free Solder Joints for Electronic Packaging