Abstract:In general, only in tangential direction, friction motion between blade dampers is concerned for vibration analysis of mistuned bladed disk. However, in practical, excitation acting on blades inevitably causes normal movement at friction interface due to the existence of angle between excitation force and contact surface. This fact leads to a variation of normal force or even a result of contact separation, which determine the maximum static friction for tangential frictional vibration. In order to assess the realistic nonlinear forced vibration of mistuned disk assemblies subjected to actual excitation with nonlinear friction and contact, an efficient method is developed by using large-scale finite element model and two-dimensional friction model. In the proposed paper, attentions are paid on the realistic coupled vibration and the impact of variable normal vibration on forced response to a traveling wave excitation. Three types of mistuned parameters, including tangential stiffness of friction surface, initial shroud gap (corresponding to preload normal force), and structural stiffness of blades are taken into account for analyzing the effect of mistuning on the coupling vibration, especially for cases of contact separation. Furthermore, by means of curve fitting of amplitude variation of normal forces, the dependence of friction motion of bladed disk studied at circumferential resonance on variation of axial displacement, even with contact separation involved, is addressed. The results show a complex nonlinear vibration with friction and contact, especially a complex multiple unstable vibration observed with repeated nonlinear snap at circumferential resonance for the cases of contact separation. With regard to a small initial normal force, a large amplitude value of force variation can greatly reduce the maximum response amplitude for mistuned blades, which is worth to pay attentions for the vibration analysis of bladed disk with nonlinear friction and contact.

Research on Vibration Characteristics for Free Standing Blade of Turbine with Random Mistuning

Investigation on the Vibration Localization of Mistuned Bladed Disk with Frictional Contact

Nonlinear Dynamics Analysis Of Mistuned Turbine Bladed Disks With Damped Shrouds

Study on Discrete Modeling Method of Modal Testing for Turbine Blade

Vibration Analysis of Mistuned Damped Blades with Nonlinear Friction and Contact

Research on the Influence of Crack Parameters on the Vibration Characteristics of Gas Turbine Compressor Blades

Study on the Forced Torsional Vibration Response of Multiple Rotating Blades with Underplatform Dampers

Modal Measurement and Analysis of Twisted Blade in Low-pressure Stage of 300MW Turbine

Investigation on the parameter sensitivity of bladed assemblies undergoing mistuning features

Vibrational Response Analysis of Rotating Mistuned Bladed-Disk Using a Deconvolution Method Based on Blade Tip Timing

Fatigue Failure Analysis of Semi-Open Impeller with Mistuning Considered

The Amplification of Vibration Response Levels of Mistuned Bladed Disks: Its Consequences and Its Distribution in Specific Situations

Reduced Order Modeling and Vibration Analysis of Mistuned Bladed Disk Assemblies With Shrouds

Mistuning Effects on Aero-Elastic Stability of Civil Transonic Fan Blades

Effects of Crack on Vibration Characteristics of Mistuned Rotated Blades

Reduced Order Models and Coupling Characteristics of the Mistuned Blade-Disk-Shaft Integration Rotor

Effect of cracked blade distribution on vibration characteristics of a mistuned bladed disk

Combinatorial Optimization of Mistuned Blade Rearrangement Based on Reduced-Order FEA Model

Vibration characteristics analysis of a type of turbine disk-blade assembly system in the civil aero-engine

Free Vibration Analysis of Pre-Twisted Rotating Dovetailed Blade under the Flexible Connection with Macro-Micro Rough Contact Topography

A STUDY ON LOCALIZATION OF VIBRATION MODEIN MISTUNED BLADED DISK ASSEMBLIES