Abstract:To explore the internal flow mechanism and improve the performance of a supersonic compressor, an efficient global optimization design method was developed for an axial flow compressor and applied in the optimization design of a prototype supersonic compressor. Based on the multiple circular arc (MCA) blade parameters, the method can be used to parameterize the elementary stage of the blade. The optimized solution is obtained by changing the elementary stage and stacking lines of the blade during the optimization process. It has the advantages of fewer optimization variables, strong physical intuition, and a smooth surface. The optimization results show that a change in the rotor blade shape parameters has a significant effect on the compressor efficiency under design conditions, while a change in the skewed-swept parameters of the stator is the main factor that improves the compressor's performance under near-stall conditions. Further numerical results show that the optimized rotor changes the form of the shock, weakens the degree of shock boundary layer interference, inhibits the radial migration flow of the supersonic rotor, reduces the loss of the rotor blade top, and improves the performance of the compressor under design conditions. The stator's optimization restrains the generation of a concentrated shedding vortex at the root of the blades and greatly improves the stall margin of the compressor. Finally, the total pressure ratio and flow rate are less than 1% of the values based on the prototype operating conditions, the design mass flow of the optimized high-load supersonic compressor is increased by 0.25%, the isentropic efficiency is increased by 1.05%, and the stall margin is enhanced by 3.5%, thus verifying the effectiveness of the optimization method.

Rotor Blade Design and Calculation of Gas Turbine Compressor

Optimization Design of Aspect Ratio and Solidity of a Heavy-Duty Gas Turbine Transonic Compressor Rotor

Multi-Objective Design Optimization of a Transonic Compressor Rotor Using an Adjoint Equation Method

Multipoint Design Optimization of a Transonic Compressor Blade by Using an Adjoint Method

Optimization Design of a Turbine Blade to Reduce Secondary Flow Loss Using a Viscous Adjoint Method

Optimization Design on Ground Based Heavy Duty Gas Turbine Compressor Blades

Heavy-duty gas turbine 3D blade modelling and flow field analysis

Preliminary Aeroelastic Stability Design for Heavy Duty Gas Turbine Compressor Blade

Optimization Of High Speed Centrifugal Compressor For A Micro Gas Turbine Based On Cfd And Fem Analysis

Blade Geometry Optimization For Axial Flow Compressor

Performance Investigation of a Large Turning Blade for Marine Gas Turbine Based on Experimental and Numerical Methods

Development of a Throughflow-Based Simulation Tool for Preliminary Compressor Design Considering Blade Geometry in Gas Turbine Engine

Rotation Effect on Flow and Heat Transfer for High-Temperature Rotor Blade in a Heavy Gas Turbine

Optimized Design of Axial Compressor Blades

Mechanism Analysis of the Influence of Blade Thickness Deviation on The Performance of Axial Flow Compressor

Multi-objective Optimization Design of Axial Compressor Blade and Stability Margin Analysis

Analysis of Overall Aerodynamic Performance of Axial-Flow Compressor with Attenuated Blade Tip

Calculation of the Overall Aerodynamic Performance of Multi-Stage Axial-Flow Compressor

Optimal Design and Analysis of a High-Load Supersonic Compressor Based on a Surrogate Model

A Method for the Optimized Design of Centrifugal Compressor Blades

Vibrational responses and fatigue life of dynamic blades for compressor in gas turbines