Abstract:In the aerospace field, aiming at the requirements of thermal response monitoring of composite structures in space service environment, a monitoring method for carbon fiber honeycomb sandwich structure based on fiber Bragg grating (FBG) reflection spectrum characteristics analysis under different thermal loads was studied. The fiber Bragg grating (FBG) sensors were implanted in different layers of carbon fiber honeycomb sandwich structure respectively. By monitoring the fiber Bragg grating (FBG) reflection spectrums of each layer under different thermal loads, the associated thermal strain characteristics of the honeycomb sandwich structure can be obtained. The results show that, certain differences exist in the thermal strain characteristics of different material layers in the carbon fiber honeycomb sandwich structure. As the temperature increases, the center wavelength of reflection spectrum of fiber Bragg grating (FBG) implanted between the outer skin surface and the glass cloth shifts to the long wave direction and the waveform of the obtained reflection spectrum changes insignificantly. As the temperature decreases, the reflection spectrum of fiber Bragg grating (FBG) implanted between the second and the third layers of the carbon fabric prepreg appears chirp effects gradually, such as sidelobe, multi-peak, etc. The main-peak center wavelength and the right sub-peak center wavelength of the reflection spectrum both shift to the short wave direction gradually. The peak amplitude of the main-peak does not show significant change and its temperature sensitivity is about 5. 56 X 10(-3) dBm . degrees C-1. The peak amplitude of the right sub-peak increases significantly and its temperature sensitivity is about 40. 32 X 10(-3) dBm . degrees C-1. The full width at half maximum(FWHM)of reflection spectrum of fiber Bragg grating (FBG) implanted between the inner skin and the honeycomb core increases gradually at a rate of 3. 19 pm . degrees C-1 with the temperature decreasing. The reflection spectrum appears a multi-peak trend significantly due to the uneven thermal stress distributed between the layers. The interlaminar thermal strain of each implanted layer increases in similar trends within the increasing temperature range of - 70 degrees C to +60 degrees C. But at the temperature range of +60 degrees C to +120 degrees C, the changing trend of the interlaminar thermal strain between each implanted layers shows significant differences. These characteristics can provide useful help to the following on-orbit status monitoring of composite spacecraft structure in space environment.

Analysis and Simulation on Stress and Strain of Fiber Bragg Grating in Smart Metal Structure

Simulation and Reconstruction for Nonuniform Strain Profile of Fiber Bragg Grating Sensor

Structural Instability-Enabled Mechanical Sensors Using Fiber Bragg Grating

The Research on temperature sensitivity of fiber bragg grating based on stress analysis

Research On Measurement Of Fiber Bragg Grating Considering The Cross-Sensitivity Of Temperature And Strain

Experiment on Embedding FBG Sensor into Intelligent Metal Structures

Temperature Sensing of Metal-Coated Fiber Bragg Grating

The Research for Embedding Optical Fiber Bragg Grating in the Steel Beam and the Sensing Properties

Thermal and Stress Strain Analysis of the Implanted Fiber Bragg Grating in a Composite Insulator Rod

Effect of metalizing nickel on the spectrum of fiber Bragg grating

Simulation of Fiber Bragg Grating Using Different Physical Parameters for Investigating the Effectiveness on Strain Sensor Measurements

A study of the temperature sensitivity of fiber Bragg gratings after metallization

Study of Sensing Properties and Contrastive Analysis of Metal Coating Optical Fiber Grating

Fatigue Behavior of Metal-Packaged Regenerated Fiber Bragg Grating Strain Sensors at High Temperatures: A Preliminary Study

Strain measurement in flexibility material using fiber Bragg gratings

Adaptive Simulated Annealing Algorithm for the Fiber Bragg Grating Distributed Strain Sensing

Research on sensitized Fiber Bragg Grating temperature sensor based on bimetal three-substrates

Fabrication and Characterization of A Metal-Packaged Regenerated Fiber Bragg Grating Strain Sensor for Structural Integrity Monitoring of High-Temperature Components

Embedded fibre Bragg grating sensors for non-uniform strain sensing in composite structures

Design and analysis of fiber Bragg grating sensor to monitor strain and temperature for structural health monitoring

Research on Thermal Load Response Spectrum of FBG Sensors Implanted in Carbon Fiber Honeycomb Sandwich Structure