Abstract:<p>SmCo-based permanent magnets possessing high Curie temperature and outstanding magnetocrystalline anisotropy are of great scientific and technological value on high temperature applications. It is widely accepted the coercivity mechanism as well as its temperature dependence is closely related to the microstructure and microchemistry. However, direct domain wall pinning observation with Lorentz microscopy is extremely difficult to explore the strength of domain wall pinning under high temperature and strong magnetic field. The quantitatively understanding of coercivity mechanism such as micromagnetic simulations cannot be carried out without the intrinsic magnetism of 1:5H and 2:17R inside the cellular microstructure of SmCo sintered magnets. Up to nowadays, there are no methods to directly measure the intrinsic magnetism of nanometer scale 1:5H and 2:17R, which retards the exploring of coercivity mechanism especially at high temperature. Herein, we prepared Sm(CoCuFeZr)<sub>z</sub> high-temperature permanent magnets with the ratio z values ranging from 7.0 to 7.8 and measured the microchemistry of 1:5H and 2:17R phases with transmission electron microscopy. Then single-phase solid solution samples with the same composition as 1:5H and 2:17R phases were prepared and the high temperature magnetic properties are measured directly. The coercivity mechanism can be well explained based on the difference of domain wall energy density qualitatively, including the abnormal temperature dependence of coercivity. More importantly, the quantitatively calculated coercivity according to the pinning-hardened coercivity theory with the obtained intrinsic parameters were found to agree well with the experiment results. Our work on the intrinsic magnetism of 1:5H and 2:17R phases at varying temperatures may offer important guidance for compositions design of the magnets with higher performance.</p>

Measurement Study of Non-uniformity Scanning Magnetic Field for Hysteresis of Magnetic Materials

RESEARCH ON NEW NONDESTRUCTIVE MEASUREMENT METHOD OF B-H CURVE OF SOFT MAGNETIC MATERIALS WITH SHEET GEOMETRY

Method of Improving the Measurement Accuracy of Magnetic Material Characteristic for Open Circuit Test Specimen

Vector characterization of soft magnetic materials

Magnetic property measurement and analysis of high-frequency soft magnetic materials under non-sinusoidal excitation considering temperature effect

A System for Controllable Magnetic Measurements of Hysteresis and Barkhausen Noise

Study on Application of Magneto-resistance Sensor in Measuring Infirm Magnetic Field

Soft magnetic materials for sensor applications in the high frequency range

Hysteresis and Loss Characteristics of Soft Magnetic Materials Based on Nonlinear Preisach Model

A Survey of the Magnetic Anisotropy Detection Technology of Ferromagnetic Materials Based on Magnetic Barkhausen Noise

Improved Preisach Model for the Vector Hysteresis Property of Soft Magnetic Composite Materials Based on the Hybrid Technique of SA-NMS

Measurement and Modeling of Thermal Effects on Magnetic Hysteresis of Soft Ferrites

The sub-millimetre non-uniformity measurement of residual and coil-generated field in the magnetic shield using atomic vapor cell

A Calculation Method for Static Hysteresis Loop and its Applications

Magnetic Flux Concentration Technology Based on Soft Magnets and Superconductors

Theory and Application of Anisotropic Magnetoresistive Sensor

Research on a theoretical model of magnetic nondestructive testing for ferromagnetic materials based on the magneto–mechanical coupling effect

Quantitative analysis of pinning-hardened intrinsic coercivity of Sm(CoFeCuZr)z (z = 7.0–7.8) high-temperature permanent magnets

Experimental Determination Of The Magnetization Dependent Part Of The Demagnetizing Field In Hard Magnetic Materials

Measuring magnetic field coil constants based on atomic magnetometry and fluxgate magnetometry

EFFECTS OF MAGNETIC FIELD ON THE HYSTERESIS V-I CURVE