Abstract:For gasoline direct injection (GDI) engines, as the exhaust gas temperature decreases, the hydrocarbon-to-particle conversion may occur, generating nucleation mode particles. A three-way catalyst converter (TWC) may have effects on the particle evolution as exhaust temperature decreases. In the present study, the effects of TWCs on particulate matter emissions and hydrocarbon-to-particle conversion process under different exhaust gas temperatures are researched. The particle size distributions are compared between the pre-TWC (upstream of the TWC) and post-TWC (downstream of the TWC) positions. Results show that the reduction of total particle number concentrations is 40-80% after exhaust gas passes the TWC, which is higher at higher load. The TWC has higher reduction efficiencies for particles in smaller size ranges. In the size range of 4-8 nm, the reduction efficiencies for particles are more than 96%. For particles larger than 50 nm, the TWC doesn't show remarkable effects on particle number (PN) concentrations. The particle evolution and the hydrocarbon-to-particle conversion with regard to the exhaust gas temperatures are also investigated. At the post-TWC position, the PN concentrations of nucleation mode are much lower compared with those of accumulation mode, and not sensitive to exhaust temperature variations. The PN concentrations of nucleation mode at the pre-TWC position with the sampling temperature of 170 degrees C are slightly higher than those at the post-TWC position. PN concentrations of nucleation mode at the pre-TWC position increase sharply when the sampling temperature decreases from 110 degrees C to 50 degrees C. It is suggested that TWCs don't convert the nucleation mode particles directly, but remove those semi-volatile hydrocarbon components as precursors of nucleation mode particles forming in low exhaust temperatures.

Influence of External Purification Technology on Particulate Emission of GDI Engine

Exhaust non-volatile particle filtration characteristics of three-way catalyst and influencing factors in a gasoline direct injection engine compared to gasoline particulate filter

An Experimental Investigation of the Impact of Washcoat Composition on Gasoline Particulate Filter (GPF) Performance

Gas Emissions and Particulate Matter of Non-Road Diesel Engine Fueled with F-T Diesel with EGR

Assessment of particle and gaseous emissions and reductions from gasoline direct injection passenger car and light-duty truck during passive regeneration

Review of the State-of-the-art of Exhaust Particulate Filter Technology in Internal Combustion Engines

Study on Improvement of Part-Load Performance in a GDI Engine Using Exhaust Gas Trap

Particulate Emissions from Gasoline Direct Injection Engines: A Review of How Current Emission Regulations Are Being Met by Automobile Manufacturers.

Numerical Investigations of Injection Timing Effects on a GDI Engine Performance: Part B, In-Cylinder Emission Formation and Oxidation Process

Particulate emissions from gasoline direct injection engines: A review of how current emission regulations are being met by automobile manufacturers

An Experimental Study on Particulate Emission Characteristics of GDI and PFI Vehicles

Investigations on a new C-GPFs with electric heating for enhancing the integrated regeneration performance under critical parameters

Engine Accelerated Aging Method Developed to Study the Effect of Lubricant Formulations on Catalyzed Gasoline Particulate Filter Durability

Nucleation Mode Particle Evolution in a Gasoline Direct Injection Engine With/without a Three-Way Catalyst Converter

Particulate Matter Emissions from Gasoline Direct Injection Engines: Research Review

Effect of gasoline aromatic compositions coupled with single and double injection strategy on GDI engine combustion and emissions

Effects analysis on soot combustion performance enhancement of an improved catalytic gasoline particulate filter regeneration system with electric heating

Physicochemical Analysis of Particle Matter from a Gasoline Direct Injection Engine Based on the China Light-Duty Vehicle Test Cycle

Impact of Injector Tip Deposits on Gasoline Direct Injection Engine Combustion, Fuel Economy and Emissions

An Experimental and Computational Investigation of Tailor-Developed Combustion and Air-Handling System Concepts in a Heavy-Duty Gasoline Compression Ignition Engine

Filtration efficiency analysis of fibrous filters: Experimental and theoretical study on the sampling of agglomerate particles emitted from a GDI engine