Abstract:To reduce the pressure drop of diesel particulate filter (DPF) as well as improve its collection efficiency. A mathematical model of DPF pressure drop and capture efficiency was established. This research systematically investigates the effects of channels per square inch (CPSI), wall thickness, and carrier ratio on DPF performance through grey relational analysis (GRA) and polynomial approximation algorithm (PAA). The findings reveal that DPF exhibits lower pressure drop and higher collection efficiency in the case where the carrier ratio, wall thickness, and CPSI are within the ranges of 1.40 to 1.53, 9.8 to 10.5 mil, and 200 to 300, respectively. Particularly, at a carrier ratio of 1.52 and a wall thickness of 10.38 mil, the pressure drop reaches a minimum value of 4.23 kPa, with a collection efficiency of 90.28%. Meanwhile, at a carrier ratio of 1.52 and a CPSI of 200, the pressure drop reaches a minimum value of 4.17 kPa, with a collection efficiency of 90.21%. The model expressions for pressure drop and collection efficiency derived from the PAA are: y1=51.19+3.815x1−8.726x2+3.794x12−1.735x1x2+0.524x22 , and y2=0.383+0.105x1+0.085x2+0.032x12−0.016x1x2−0.0032x22 . The foregoing models exhibit excellent predictive accuracy and goodness of fit for the DPF performance. Under the interactive influence of carrier ratio and wall thickness, the root mean square errors (RMSE) for pressure drop and collection efficiency are 0.0110 and 0.0002, respectively, with corresponding goodness of fit values of 0.9996 and 0.9985. As revealed by the GRA results, wall thickness exerts the most significant impact on DPF performance, presenting a GRG of 0.84 for filtration efficiency and 0.79 for pressure drop. The overall influence on both collection efficiency and pressure drop follows the descending order: wall thickness > carrier ratio > CPSI. This work has important engineering significance for optimizing the DPF capture performance and extending its working time.

Theoretical and Simulation Analysis of DPF Pressure Drop Characteristics

Numerical Simulation of flow characteristics in a new-type multistage nozzle of pressure drop

Simulation Analysis of the Influence Factors to GW4D20 Car Diesel Particulate Filter Pressure Drop

Pressure Drop Model of Dpf Considering Ash Factor at Different Capture Stages

Lumped model for evaluating dynamic filtration and pressure drop behaviour in diesel particulate filters

Investigation of pressure drop in a cocurrent downflow three-phase moving bed

Analysis of Temperature and Pressure Characteristics in Catalyzed Diesel Particulate Filter Operation for Heavy-Duty Diesel Engine

Experimental Investigation on the Influence of Filtration Velocity on Particulate Deposition Characteristics in DPF

Experimental Study on the Influence of DPF Micropore Structure and Particle Property on Its Filtration Process

Simulative study on trapping performance of DPF based on GT-Power

Analysis of the effect of particle–wall collision process in DPF on the spatial structure of smoke cake layer

Effects of carrier structure parameters on diesel particulate filter capture performance based on grey relational analysis

Investigation of Diesel Particulate Filter Performance under Typical Failure Conditions

Experimental Study and Numerical Analysis on Pressure Drop and Temperature Field Characteristics of Asymmetric Cell Technology Diesel Particulate Filter for Silicon Carbide

Simulation Based Visual Study of Particulate Deposition Characteristics in Millimeter-Scale Channels of a Diesel Particulate Filter

Numerical simulation of diesel particulate filter flow characteristics optimization: From the perspective of pore structure parameters and inlet velocity

Novel soot loading prediction model of diesel particulate filter based on collection mechanism and equivalent permeability

Effect of structural parameters on diesel particulate filter trapping performance of heavy-duty diesel engines based on grey correlation analysis

Comparison of the Use of Real Diesel Soot and Soot Surrogate in the Performance Analysis of Diesel Particulate Filters

CFD ANALYSIS ON PRESSURE DROP OF DIMPLE JACKETED HEAT EXCHANGER IN CHEMICAL POST-PROCESSING INTEGRATED EQUIPMENT

Effect of Structure Parameters of Catalyst Substrate on the Performance of Diesel Particulate Filter