Abstract:The melt grafting of glycidyl methacrylate (GMA) onto powdered isotactic polypropylene (PP) in a Haake Rheocord RC90 mixer was studied. Grafting degrees were determined by nonaqueous back titration of trichloroacetic acid with sodium hydroxide. The extent of degradation and crosslinking of PP during grafting was indicated by the melt-flow rates (MFR) of the grafted samples. The influences of GMA concentration, initiator type and concentration on grafting degree, reaction efficiency, and degradation were evaluated. A novel method was developed to obtain a high grafting degree with little degradation of PP using acrylamide (AM) as the initiating agent. The grafting process occurred before or during the melting of PP (i.e., solid-state grafting), at which temperature crosslinking is preferred over chain scission. Primary free radicals generated from the rapid decomposition of AM have a higher tendency to attack GMA molecules than PP chains. At the same estimated amount of primary radicals, both grafting degree and grafting efficiency increase with decreasing decomposition temperature of the initiator (for the same decomposition half-life) in the order of AM > benzoyl peroxide (BPO) > 2,5-di(t-butylperoxy)-2,5-dimethyl-3-hexyne (LPO). FunctionalizedPP with the desired grafting degree and little degradation of PP could be obtained by the use of mixed initiators. © 1998 John Wiley & Sons, Inc. J Appl Polym Sci 67:1957–1963, 1998

Study on Polypropylene Powder Grafted with Acrylic Acid by Photo-Initiated Solid Phase Technique

Simultaneous Graft Polymerization of Polypropylene with Maleic Anhydride and Butyl Acrylate

Study on Solid Phase Grafting of Acrylic Acid onto Polypropylene to Prepare Hydrophilic Polypropylene

Grafting Polymerization of Acrylic Acid Onto Preirradiated Polypropylene Fabric

Study on the Graft Reaction of Poly(propylene) Fiber with Acrylic Acid

Photo-grafting modification of polypropylene nonwovens with acrylic acid and its filtration adsorption and desorption toward cationic dye

Graft Copolymerization of Mixtures of Acrylic Acid and Acrylamide Onto Polypropylene Film

Photo-grafting Poly(acrylic Acid) Onto Poly(lactic Acid) Chains in Solution

Supercritical Carbon Dioxide-Assisted Preparation of Polypropylene Grafted Acrylic Acid with High Grafted Content and Small Gel Percent

Grafting copolymerization of acrylamides onto preirradiated PP films

Nondegradative Melt Functionalization of Polypropylene with Glycidyl Methacrylate

Study of Maleic Anhydride and Styrene Grafted Onto Polypropylene Induced by UV Irradiation

Preparation of toughened polypropylene-g-poly (butyl acrylate-Co-acrylated castor oil) by suspension grafting polymerization

Melt Grafting Of A Long-Chain Unsaturated Carboxylic Acid Onto Polypropylene

Grafting Copolymerization of Dimethylaminoethyl Methacrylate and Acrylic Acid Onto Preirradiated Polypropylene Film by Two-Step Reactions

A Facile, Green, Versatile Protocol To Prepare Polypropylene-G-Poly(Methyl Methacrylate) Copolymer By Water-Solid Phase Suspension Grafting Polymerization Using The Surface Of Reactor Granule Technology Polypropylene Granules As Reaction Loci

Preparation of Temperature-Sensitive Polymer Films by Surface Photografting Techniques

Surface Grafting Polymerization of Acrylonitrile Onto Polypropylene Film

A Facile Method to Prepare Polypropylene/poly(butyl Acrylate) Alloy Via Water–solid Phase Suspension Grafting Polymerization

Graft Modification of Chlorinated Polypropylene and Coating Performance Promotion for Polypropylene

Synthesis and Characterization of Solid-Phase Graft Copolymer of Polypropylene with Styrene and Maleic Anhydride