Abstract:Adopting liquid fuel and on-line reprocessing scenario are the unique features of molten salt reactor (MSR). Considering lattice code for thermal reactor is not suitable for MSR calculation, batch-wise fuel salt reprocessing scheme and "two-step" deterministic calculations cause some approximations in simulation of MSR on-line continuous fuel reprocessing, this study focuses on the development of a direct calculation method for MSR fuel cycle simulation based on an open source Monte Carlo code OpenMC. A fictitious decay constant and an external source term were introduced into traditional burnup equation for accurate simulation of on-line fuel reprocessing. Finally, a MSR fuel cycle simulation code OpenMCB-MSR was developed by coupling OpenMC and burnup code with Python script. Two pressurized water reactor (PWR) pin cell benchmarks without considering fuel online reprocessing, and one actual MSFR fuel cycle benchmark considering fuel on-line reprocessing were used for verification of OpenMCB-MSR. By comparison with reference results, the maximum differences of k(inf) calculated by OpenMCB-MSR are no more than 400 pcm both for two PWR pin cell benchmarks. Moreover, apart from isotopes with small absolute nuclide number density, all the other isotopes' nuclide number densities show a difference of less than 10%. For MSFR benchmark, the reactivity coefficients, isotope mass evolutions during fuel cycle process, mass evolution of fission products in core and breeding ratio calculated by OpenMCB-MSR show a good agreement with reference results. At equilibrium state, apart from isotopes with very small absolute mass, the differences of other isotopes' mass are no more than 5.0% in comparison with reference results. Benchmark verification results indicate that the method of MSR fuel cycle simulation based on OpenMC code is correct, and OpenMCB-MSR has capability of MSR fuel cycle analysis.

Feasibility of DRAGON&DONJON code for MSR core burnup calculation

Burnup-Dependent Core Neutronics Analysis of Plate-Type Research Reactor Using Deterministic and Stochastic Methods

Extended development of a Monte Carlo code OpenMC for fuel cycle simulation of molten salt reactor

High-fidelity Neutronics Simulation of Channel-Type Molten Salt Reactors

STEADY THERMAL-HYDRAULIC ANALYSIS FOR THE CORE OF A NEW CONCEPT MOLTEN SALT REACTOR

Numerical Analysis for a Molten Salt Reactor in the Presence of Fissile Lump

Three Dimensional Neutronic/thermal-Hydraulic Coupled Simulation of MSR in Transient State Condition

Numerical Analysis for a Molten Salt Reactor in the Presence of Localized Perturbations

Transient Analysis For Liquid-Fuel Molten Salt Reactor Based On Morel2.0 Code

Calculation acceleration for fuel cycle simulation of molten salt reactor based on multi-group cross section method

Software Development for Pebble-bed MSR Calculation

Development and Verification of a Model for Generation of MSFR Few-Group Homogenized Cross-Sections Based on a Monte Carlo Code OpenMC

Development of A Safety Analysis Code for Molten Salt Reactors

Fuel Cycle Analysis of Molten Salt Reactors Based on Coupled Neutronics and Thermal-Hydraulics Calculations

Coupled Neutronics/thermal-Hydraulics for Analysis of Molten Salt Reactor

A Consistent One-Dimensional Multigroup Diffusion Model for Molten Salt Reactor Neutronics Calculations

Improvements and Validation of the Transient Analysis Code MOREL for Molten Salt Reactors

Burnup Analysis of Molten Salt Fast Reactor Based on MCNP and ORIGEN

Three dimensional steady‐state neutronics/thermal‐hydraulics coupled simulation for a molten salt reactor moderated by zirconium hydride rods

Multi-physics numerical analysis of the fuel-addition transients in the liquid-fuel molten salt reactor

Development of a MCNP–ORIGEN Burn-Up Calculation Code System and Its Accuracy Assessment