Abstract:Breed and Burn (B&B) fuel cycle in molten salt reactors (MSRs) qualifies this reactor type as one of the best candidates to be developed for the Gen-IV R&D program. This feature can be approached by employing a closed fuel cycle and application of a molten salt reactor as a spent nuclear fuel burner; the features promise sustainable and clean energy in the future. In this study, a complete package has been developed to calculate core inventory, fuel burnup, and salt clean-up systems of molten salt reactors during their lifetime. To achieve this, the iMAGINE-3BIC package ("iMAGINE 3D-Reg Burnup & Inventory Calculator package") has been developed in MATLAB R2023a by employing a CINDER90 module of MCNPX 2.7 for burnup-calculation and multi-linear regression method (MLR). The package can estimate the core inventory (concentration of 25 actinides and 245 non-actinides elements) and the burnup of the reactor core during MSR lifetime (up to 100 years) while optimizing the computational resources (time, CPU and RAM), and it can even be hassle-freely executed on standalone PCs in an appropriate time due to its generous database. In addition, the salt clean-up module of the iMAGINE-3BIC package can be employed to evaluate the effects of the salt clean-up system on the above parameters over the MSRs' lifetime. Finally, the iMAGINE-3BIC package has been applied to an iMAGINE reactor core design (University of Liverpool, UK—chloride-based salt fuel system) and an EVOL reactor core design (CNRS, Grenoble, France, fluoride-based salt fuel system) to evaluate and compare the performance of chloride/fluoride-based salt fuel MSRs from the point of burnup, core inventory, and salt clean-up systems. The results confirm that while a chloride-based salt fuel system has some advantages in less dependency on the salt clean-up system and fewer poisoning elements inventory, the fluoride-based system can achieve higher burnup during the reactor lifetime. The outcome of this study, along with the first part of this article, provides evidence to support the neutronic decision matrix as well as the pros and cons of employing chloride- or fluoride-based fuel systems in MSR cores.

Burnup Analysis of Molten Salt Fast Reactor Based on MCNP and ORIGEN

Studies on the molten salt reactor. Code development and neutronics analysis of MSRE-type design

Core and blanket thermal–hydraulic analysis of a molten salt fast reactor based on coupling of OpenMC and OpenFOAM

Numerical Analysis for a Molten Salt Reactor in the Presence of Fissile Lump

Numerical Analysis on the Dynamic Behaviors of a Graphite-Moderated Molten Salt Reactor Based on MOREL2.0 Code

STEADY THERMAL-HYDRAULIC ANALYSIS FOR THE CORE OF A NEW CONCEPT MOLTEN SALT REACTOR

Study on the Coupled Neutronic and Thermal-Hydraulic Characteristics of the New Concept Molten Salt Reactor

Fuel Cycle Analysis of Molten Salt Reactors Based on Coupled Neutronics and Thermal-Hydraulics Calculations

Analysis on the Neutron Kinetics for A Molten Salt Reactor

The Effects of Core Zoning on Optimization of Design Analysis of Molten Salt Reactor

Coupled Neutronics/thermal-Hydraulics for Analysis of Molten Salt Reactor

The Optimization Design Of Lower Plenum And Distribution Plates In Msr

Thermal-hydraulic Design and Analysis of a Small Modular Molten Salt Reactor (MSR) with Solid Fuel

On the Employment of a Chloride or Floride Salt Fuel System in Advanced Molten Salt Reactors, Part 2; Core Inventory, Fuel Burnup, and Salt Clean-Up System

Transient Analysis For Liquid-Fuel Molten Salt Reactor Based On Morel2.0 Code

Improvements and Validation of the Transient Analysis Code MOREL for Molten Salt Reactors

Development of a MCNP–ORIGEN Burn-Up Calculation Code System and Its Accuracy Assessment

Development of A Safety Analysis Code for Molten Salt Reactors

Extended development of a Monte Carlo code OpenMC for fuel cycle simulation of molten salt reactor

Analysis of the thermal feedback effect and nuclides flow effect on the fuel‐cycle characteristics of Molten Salt Reactors

High-fidelity Neutronics Simulation of Channel-Type Molten Salt Reactors