Abstract:A multi-stage high pressure reducing valve (MSHPRV) is proposed. It can achieve a multi-stage pressure reducing way. Valve failure mainly occurs under high pressure and high temperature conditions, thus it is necessary to investigate the strength of MSHPRV under those complex conditions. In this paper, the mathematical model of MSHPRV is established and Computational Fluid Dynamics (CFD) method is employed to simulate its flow fields and thermo-mechanical stress. Next, the stress of MSHPRV under different opening time and the fatigue damage of MSHPRV under different valve openings are studied. Finally, two changes are provided on geometry of MSHPRV and the geometrical factors are optimized. The results show that, the radial direction from inner wall to outer wall is the main heat transfer direction for valve body. At opening time 50 s, the working condition of MSHPRV is dangerous condition. Meanwhile, the maximum value of thermal stress is 487 MPa, which is located at the upper end face of valve chamber region B3. There is a lag effect of stress distribution with respect to temperature distribution. The combined stress of valve body is composed of thermal stress and mechanical stress, in which thermal stress holds the dominant position. Moreover, with the increasing of valve opening, the fatigue damage of valve body increases correspondingly. It can be concluded that MSHPRV can cope with complex conditions like high pressure and high temperature. In the optimization design of MSHPRV, it can be found that the best strength of MSHPRV is achieved with such geometrical factors as angle 15, diameter 4 mm and 2 stage plates. Besides, radian design as the improved structure is recommended. This work can benefit the further research work on the regulation performance and safe operation of high pressure reducing valve. (C) 2017 Elsevier Ltd. All rights reserved.

Effect Analysis of Temperature Gradient on Metal Bellow Mechanical Performance

Thermo-Mechanical Coupling Computation and Warping Analysis During Controlled-Cooling of X65 Heavy Pipeline-Plate

The Study of Controlled Cooling Technology and Warping of X65 Heavy Pipeline Plate

Thermo-mechanical Stress and Fatigue Damage Analysis on Multi-Stage High Pressure Reducing Valve

Modal and Structural Analysis on a Main Feed Water Regulating Valve under Different Loading Conditions

Valve Body’ s Thermal Characteristics Analysis for High-Temperature Electrical Gate Valves and Its Optimal Design

Research on the Analysis of Residual Stress in Heat Treatment of Bellows Using ABAQUS

Numerical Study On Temperature Field And Spool Deformation Of Throttle Slide Valve With V-Notches

An Investigation of the Temperature Distributions Inside A Spool Valve Owing to A Viscous Heating Effect

An Integrated Thermal and Mechanical Performance Analysis of Effect of Cold Molten Salt Temperature for Thermocline Tank

Failure analysis on rubber sealing structure of mandrel hanger and improvement in extreme environments

Fluid-solid-heat Coupling Deformation Analysis of the Valve Trims in a Multistage Pressure Reducing Valve

Study Of A Bellow-Type Flow Rate Control Valve

Effect of Lateral Fin Profiles on Stress Performance of Internally Finned Tubes in a High Temperature Heat Exchanger

Coupling Effect of Strain Gradient Strengthening and Thermal Softening on the Microscale Plastic Behavior of Metallic Materials

FEM Analysis and Preload Evaluation of Bolted Joints Subject to Low Temperature

Theory Analysis of Clamping Malfunction for Some Slide Valve

Effect of Operating Temperature on the Performance of Expansion Joints Between Tube and Tube Plate

Case Study Of Nonlinear Buckling With Shape Distortion Due To Thermal Load Ocr

Analysis of the Temperature and Stress Field in a Steam Turbine Bypass Valve Body

Estimate of Temperature Gradients of Thin-Walled Structures under Thermomechanical Fatigue Loading