Abstract:The Euler–Lagrange method is a great way for multiphase bubble flow simulation, the detailed information of bubbles can be effortlessly obtained, and it is helpful for the efficiency and safety of different industry processes. Traditionally, the computational fluid dynamics-discrete bubble model (CFD-DBM) method has always been used to simulate this flow process. Nevertheless, the ability of the traditional CFD-DBM method is significantly limited in terms of the size ratio between the grid and bubble, where the grid size must be larger than the bubble size. In reality, the bubble may be larger than the grid and the grid/bubble size ratio can be very large due to the effects of complex bubble dynamics (such as the bubble breakup and coalescence) and complex internal flows. To address this issue, an improved CFD-DBM method is proposed in this study, which can be used for the simulation with a wide grid/bubble size ratio in gas–liquid–bubble multiphase simulation, and the volume of fluid (VOF) method is applied to capture the interface between gas and liquid phases. A gradient-based interpolation method is employed to reconstruct the liquid velocity around the target bubble when the grid size is much larger than the bubble size. If the bubble size is comparable with or larger than the grid size, the interphase force correction and the field smoothing will be carried out within a spherical support area. Subsequently, the proposed model is validated by the comparison with a bubble column experiment, in terms of the bubble size distribution and bubble vertical velocity. The results demonstrate the high accuracy of the new method. Finally, the influence of different parameters including normal spring stiffness, critical Weber number, and the range of the spherical support area on the bubble flow is investigated.

Predictive Study of Bubble Mean Diameter in Subcooled Flow Boiling

Investigation of Bubble Interaction in a Temporal and Spatial Heat Flux Partitioning Model for Subcooled Flow Boiling

Experimental Measurement and Theoretical Analysis on Bubble Dynamic Behaviors in a Gas-Liquid Bubble Column

Saturated Flow Boiling Heat Transfer of R1233zd(E) in Parallel Mini-Channels: Experimental Study and Flow-Pattern-based Prediction

Analyses of Bubble Dynamics in Subcooled Boiling Flow Using Euler-Lagrange Method

Study of Heat Transfer for Co2 Flow Boiling in Horizontal Small Diameter Tubes

The Modeling of Bubble Lift-Off Diameter in Vertical Subcooled Boiling Flow

A BUBBLE-LAYER-BASED MECHANISTIC MODEL FOR THE SLIGHTLY SUBCOOLED FLOW BOILING IN VERTICAL TUBES

Investigation of Bubble Departure Diameter in Horizontal and Vertical Subcooled Flow Boiling

Numerical Simulation Research of Bubble Characteristics and Bubble Departure Diameter in Subcooled Flow Boiling

Numerical Study on Bubble Behaviour and Heat Transfer Characteristics of Subcooled Pool Boiling Based on Non-Empirical Boiling and Condensation Model

Visualization Study on Bubble Dynamical Behavior in Subcooled Flow Boiling under Various Subcooling Degree and Flowrates

An Improved Computational Fluid Dynamics-Discrete Bubble Model for Multiphase Bubble Flow Simulation with a Wide Grid/bubble Size Ratio

A modified force balance model for predicting bubble departure diameter and lift-off diameter in subcooled flow boiling

Role of Bubble Dynamics in Heat and Mass Transfer in Annular Flows

Numerical Study on Bubble Departing Behavior from Heated Surface in Subcooled Pool Boiling

Predictive Modeling for Microchannel Flow Boiling Heat Transfer under the Dual Effect of Gravity and Surface Modification

A Mechanistic Model for Slightly Subcooled Flow Boiling in Vertical Tubes

Nonlinear Aspects of Boiling Systems and A New Method for Predicting the Pool Nucleate Boiling Heat Transfer

NUMERICAL SIMULATIONS IN SUBCOOLED FLOW BOILING USING A TWO-WAY COUPLING EULERIAN-LAGRANGIAN MODEL

Numerical simulation of boiling behavior in vertical microchannels