Influence of Spike Defect on the Impact Breakdown Characteristics of SF6 Gas Gap

Xuandong LIU,Lingli ZHANG,Can GUO,Tao WEN,Qiaogen ZHANG
DOI: https://doi.org/10.13336/j.1003-6520.hve.20190329018
2019-01-01
Abstract:In order to research the impact breakdown characteristics of SF6 gas gap on the condition that there exists a spike defect on the bus of GIS, a stainless steel needle is imitated as a spike defect, so as to study the influences of pressure, wavefront time and electric field non-uniformity on its 50% breakdown voltage (U50) and voltage-time (V-t) characteristics under double exponential impulse voltage. First of all, changing SF6 pressure in experimental chamber, when the wavefront time is very short, the 50% breakdown voltage of the gap hardly changes with pressure. However, when the wavefront time increases, the U50-p curve has a hump shape. In the range of experimental settings, pressure has no significant effect on voltage-time characteristics. Secondly, influence of wavefront time of double exponential impulse voltage is studied. It is frond that the 50% breakdown voltage of the gap increases quickly with the increase of the wavefront time and with a trend of the slow rate first to the fast rate later. When the wavefront time of applied voltage is short (0.08~0.9 μs), voltage-time characteristics curve has a negative slope; when the wavefront time becomes longer (8~15 μs), the slope of voltage-time characteristics curve turns to be positive. What is more, a new method to calculate these voltage-time characteristics curves under impulse voltage with a longer wavefront time is put forward. Finally, the influence of non-uniformity on discharge characteristics is studied. It is found that the electric field non-uniform factor (f) increases, and the 50% breakdown voltage decreases almost in a linear trend. Voltage-time characteristics cluster with a concave basin shape is drawn at different f. When f increases, dispersion of voltage-time characteristics cluster is reduced and the flat region becomes larger. These experimental results have certain guiding significance to improve the field detection means of spike defects in GIS.
What problem does this paper attempt to address?