Abstract:A high ratio (winding ratio of 1:80) pulse transformer with a modular ferrite core was developed for a repetitive resonant charging system. The magnetic core is constructed from 68 small blocks of ferrites, glued together by epoxy resin. This allows a high degree of freedom in choosing core shape and size. Critical issues related to this modular design are the size tolerance of the individual ferrite blocks, the unavoidable air gap between the blocks, and the saturation of the core. To evaluate the swing of the flux density inside the core during the charging process, an equivalent circuit model was introduced. It was found that when a transformer is used in a resonant charging circuit, the minimal required volume of the magnetic material to keep the core unsaturated depends on the coupling coefficient of the transformer and is independent of the number of turns of the primary winding. Along the flux path, 17 small air gaps are present due to the inevitable joints between the ferrite blocks. The total air gap distance is about 0.67 mm. The primary and secondary windings have 16 turns and 1280 turns, respectively, and the actually obtained ratio is about 1:75.4. A coupling coefficient of 99.6% was obtained. Experimental results are in good agreement with the model, and the modular ferrite core works well. Using this transformer, the high-voltage capacitors can be charged up to more than 70 kV from a low-voltage capacitor with an initial charging voltage of about 965 V. With 26.9 J energy transfer, the increased flux density inside the core was about 0.23 T, and the core remains unsaturated. The energy transfer efficiency from the primary to the secondary was around 92%.

The Effect of Detuning Coefficient on the Resonance Performance of Air-core Spiral Tesla Transformer

All-Detuned Three-Coil Configuration for Advantages in Inductive Power Transfer Systems

A Coil Structure Optimal Method Based On Vertical Coupling For Inductive Power Transfer

A Method of Resonant Frequency Optimized Selection for a SP Inductive Coupled Power Transfer System

Experimental Characterization of Hybrid Temperature and Frequency Effects on the Performance of Transformers on Silicon Substrate

Design and Analysis of the Tesla Transformer with Duplex Secondary Winding

Design of Inductively Coupled Energy Transfer System

Design And Optimizations Of Solenoid Magnetic Structure For Inductive Power Transfer In Ev Applications

A High-Voltage Pulse Transformer with a Modular Ferrite Core.

Analysis of Ohmic Losses in Tesla Transformers Utilizing the Open Magnetic-Core

Distributed Parameters and Resonant Frequency Computation for Resonant Coil Used in Wireless Power Transfer

Study on separable transformer's efficiency for contactless energy transmission system

A Resonant Magnetic Field Probe with Enhanced Sensitivity Using Quarter-wavelength Impedance Transformer

LLC Resonant Transformer Distributed Parameters Abstraction

Modelling and Theoretical Analysis of an Air-Core Transformer with Strong Coupled Schemes

Coil Structure Optimization Method for Improving Coupling Coefficient of Wireless Power Transfer

Detuned Resonant Capacitors Selection for Improved Misalignment Tolerance of LCC-S Compensated Wireless Power Transfer System

Analysis of the Double-Layer Printed Spiral Coil for Wireless Power Transfer

Design method for high-power high-frequency magnetic-resonance air-core transformer

Reluctance Circuit and Optimization of a Novel Contactless Transformer

Magnetic resonant wireless power transmission technology based on planar core