Abstract:The series resonance type fault current limiter has the advantages of simple operating principle and topological structure,etc. The primary parameter of series resonance type fault current limiter for high-voltage system is reasonable.However,in the process of restraining fault current after a fault occurrence in electrical network,the capacitor and parallel inverter switch will confront poor working condition.This paper studies the above condition by simulation using the software Matlab.Proceeding from the study,we arrive at the conclusions:1)in the process of closing the inverter switch short circuit capacitor to make the current limiter work in short circuit current limiting mode switching from normal operation mode,there is higher-order of voltage(current)oscillation between capacitor and parallel inverter switch,and the peak value of voltage(current)increases and oscillates with the growing of the speed for closing the inverter switch; 2)when the inverter switch is composed of semiconductor device,control system must respond to short circuit and close the inverter switch quickly,otherwise,the semiconductor device may be damaged by over current(voltage);3)during fault current limiter working in current limiting mode to short circuit loop being shut off by relay protection device,the inverter switch will bear the full fault current and oscillation current.If using semiconductor device as inverter switch,the capacity of semiconductor device must be chosen according to the working condition.

Experimental Study of Transformer Coupling SSFCL with Capacitance Load

Experimental Study of Transformer Coupling Solid State Fault Current Limiter with Capacitance Load

Control strategy of transformer coupling solid state fault current limiter and its experimental study with capacitance load

Research of the Coupling Transformer in the New Bridge-Type Solid State Fault Current Limiter System

Study Of The Three-Phase Saturated Transformer Coupling New Bridge-Type Ssfcl

Study on Magnetic-Shield-type Air-Core Transformer Coupling SSFCL

The Fe-Based State Space Analysis For Saturated Transformer

Design of Saturated Coupling Transformer in a New Bridge-type Solid State Fault Current Limiter

A Novel Auto-transformer Coupling Bridge-type SSFCL and Its Topology Improvement

Impact of Solid State Fault Current Limiter on Double-source Systems

Control Strategy and Test Study of Bi-directional Current's Solid State Fault Current Limiter

Study on Novel Air-Core Transformer Type SCFCL with a Trigger Winding

Simulation Study of New Solid-State Fault Current Limiter

Control Strategy & Test Study Of Ssfcl With Bi-Directional Current

Simulation Study of Series Resonance Type Fault Current Limiter

Simulation Research on the Effect of the Paralleled Compensating Capacitor on the Solid State Fault Current Limiter Operation

Test of Controllable Impedance Type Fault Current Limiter Based on Air-core Superconducting Transformer

Fundamental and Analysis of a Novel Magnetic Coupling Fault Current Limiter for VSC DC Grids

Performance Analysis on a Flux Coupling Superconducting Fault Current Limiter (SFCL) Considering the Power Grid Integration Based on MATLAB/SIMULINK

Study On Dynamic Characteristics of a Repulsion Mechanism in Superconducting Fault Current Limiter

Effects of a Flux-Coupling Type Superconducting Fault Current Limiter on the Surge Current Caused by Closed-Loop Operation in a 10kv Distribution Network