Abstract:In contrast to alternating current(AC) power transmission,direct current(DC) power transmission has a series of advantages,such as low line loss and nonexistence of the problem of system synchronous operation stability.In recent years, with the rapid development of voltage source converter technology with higher voltage,the study on flexible multi-terminal high voltage direct current transmission(HVDC) system,DC transmission and distribution power net,as well as the related key technologies and equipments such as the high-voltage DC circuit breaker (DC-breaker) has captured great attention from the community at home and abroad.The research status of three types of DC-breakers(spoken of as the mechanical type,all-solid-state and hybrid type DC-breakers) and their topologies,working principles,advantages as well as disadvantages are briefly treated.It is concluded that the hybrid type should be the main trend of development for high-voltage DC-breakers. Furthermore,a scheme of hybrid DC-breakers with fault current limiting is proposed, its feasibility verified through simulation.In this scheme the DC-breaker adopts the hybrid solid-state switch (composed of half and full gate-controlled devices in series connection) which is paralleled with a mechanical breaker involving the fault-current-limiting technology. Therefore the rising rate of short-circuit current can be effectively restrained,relieving the requirement on fault diagnosis sensitivity and mechanical breaker speed.Moreover,the series quantities of solid-state switching devices (especially the expensive full gate-controlled devices such as the insulated gate bipolar transistor)in high voltage application,and the technical difficulty and production costs etc will be reduced.

INVESTIGATIONS ON SWITCHING IDLE POWER TRANSFORMER WITH PHYSING VACUUM CIRCUIT BREAKERS

Research on Unloaded Switching into Fault Protection for UHV Transmission Line

Experimental Study on Fast Isolating Switch with Vacuum Multi-breaks

Energization Transient Suppression of 750 kV AC Filters Using a Preinsertion Resistor Circuit Breaker with a Controlled Switching Device

Study on Inrush Current Restraining Technology when Energizing No-load Transformer

Three-Phase Transformer Inrush Current Reduction Strategy Based on Prefluxing and Controlled Switching

A NEW METHOD TO IDENTIFY INRUSH CURRENT BY PHASOR COMPARISON

An Inrush Mitigation Technique of Load Transformers for the Series Voltage Sag Compensator

An Intelligent Control-Based Vacuum Circuit Breaker with Permanent Magnet and Dynamic Characteristic Analysis

A New Method to Identify Inrush Current Based on Error Estimation

A Scheme for Current-limiting Hybrid DC Circuit Breaker

Single‐phase Grouding Fault Analysis and Control Scheme of Transformerless Flexible Multistate Switch

Principle and Influencing Factors of the Transformer Sympathetic Inrush

Analysis of the Influence of the Breaking Radiation Magnetic Field of a 10 kV Intelligent Circuit Breaker on an Electronic Transformer

Analysis and suppression of operational overvoltage and inrush current for high‐speed trains by automatic phase‐switching technique

A Novel Control Strategy of Phase-Controlled Switching Technology for Vacuum Circuit Breaker

Influence on Switching Capability of HV Circuit Breakers by Employing Rectifier Type Fault Current Limiter

An In-rush Current Suppression Technique for the Solid-State Transfer Switch System

Research on Key Technologies of Intelligent Control Switches in Distribution Networks

IDENTIFICATION OF TRANSFORMER MAGNETIC INRUSH CURRENT BASED ON VIRTUAL FLUX AND DIFFERENTIAL CURRENT CHARACTERISTICS

Power Transformer Fault Diagnosis Based On Controlled Switching Vibration Analysis