Abstract:High-temperature, gas-cooled reactors (HTGRs) are promising advanced reactor designs. Leveraging passive safety features, higher core outlet temperatures, previous commercial operational experience, and potential coupling with nonelectrical systems, HTGRs present many advantages over traditional light water reactors and other advanced reactor designs. The High-Temperature, Gas-Cooled Test Reactor (HTGR-TR) is a point design developed by Idaho National Laboratory as a response to the need for the expansion of U.S. test reactor capabilities. The HTGR-TR was designed to serve as a test reactor for Generation-IV small modular prismatic block HTGRs and to provide irradiation data, two crucial contributions to the development of advanced reactors. As in any reactor design, it is necessary to understand the behavior of the reactor during accident scenarios to determine the overall safety of the design. Pressurized loss of forced cooling (PLOFC) and depressurized loss of forced cooling (DLOFC) are two accidents that can occur in HTGRs and that present challenges to decay heat removal. In order to understand the behavior of the fuel during these accidents, the resulting mechanical behavior and fission product migration in the fuel are evaluated. Using the HTGR-TR design, which utilizes tristructural isotropic (TRISO) fuel, a multiphysics analysis during the PLOFC and DLOFC transients was performed. This study utilizes neutronics, thermal hydraulics, and fuel performance modeling to analyze the behavior of TRISO particles during steady-state operation and the described transients. This analysis aims to characterize the hoop stress and strain during the transients, as well as predict fission product migration and radiological release. Due to the startup conditions of the HTGR-TR, the silicon carbide (SiC) layer for both of the transients and steady-state conditions are initially in compression for both the hoop stress and strain. The DLOFC transient at the beginning of cycle was the most challenging overall to the fuel, having the closest to tensile behavior and the closest to tensile strain. Because the integrity of the SiC layer was not challenged during any of the transients, the release of 90 Sr and 137 Cs was found to be negligible. The PLOFC transient at the end of cycle resulted in the largest 110m Ag release and subsequent radioactivity increase. However, the increase in radioactivity was minor when compared to typical operating conditions due to the relatively large diffusivity of 110m Ag though SiC at normal operating temperatures. Highlights include

Study of Rod Ejection Accident Safety of PWR for Long-lived Fission Product Transmutation

Analyses for Passive Safety of Fusion-Reactor During Ex-Vessel Loss-Of-Coolant Accident

Research on Compliance Between Large Break LOCA of HPR1000 and New LOCA Acceptance Criterion 10Cfr50.46c

Optimization of Spatial Structure Designs of Control Rod Using Monte Carlo Code RMC

Preliminary analysis of maximum hypothetical accident for a solid core space nuclear reactor power system

Multiphysics Analysis of PLOFC and DLOFC Accidents in the HTGR-TR

THE CMT SIMULATION ON THE LARGE IMPASSIVE PWR WITH RELAP 5

Preliminary Study for the Passive Containment Cooling System Analysis of the Advanced PWR

Transmutation Study of Minor Actinides in Mixed Oxide Fueled Typical Pressurized Water Reactor Assembly

Study of Minor Actinides Transmutation in PWR MOX fuel

Development and Application of Multi-Physics Safety Analysis Code for Advanced Liquid Metal Cooled Reactor

ACTIVATION AND 3-DEMENSIONAL DOSE ANALYSIS SURROUNDING THE CONTROL RODS OF THE HTR-PM REACTOR WITH MONTE CARLO METHOD

Thermohydraulic Transient Studies of the Chinese 200mwe HTR-PM for Loss of Forced Cooling Accidents

Characteristic Behavior of Pebble-Bed Modular High-Temperature Gas-Cooled Reactor During Loss of Forced Cooling Accidents

Analysis on Pellet-Cladding Interaction of Fuel Rod During Power Ramp of NHR200-II

Study on physics characteristics of Th-U fuel in long-cycle core

Simulation of VVER-1000 Guillotine Large Break Loss of Coolant Accident Using RELAP5/SCDAPSIM/MOD3.5

Thermal Behavior of the HTR-10 under Combined PLOFC and ATWS Condition Initiated by Unscrammed Control Rod Withdrawal

Study on coupling effect of CRUD growth and heat transfer on fuel rod

Study on Reactor Cavity Cooling System of HTR-PM in DLOFC Accident with TIN-CAVCO Code and SPECTRA Code

Detailed characterization of a PWR fuel rod at high burnup in support of LOCA testing