Abstract:High-temperature, gas-cooled reactors (HTGRs) are promising advanced reactor designs. Leveraging passive safety features, higher core outlet temperatures, previous commercial operational experience, and potential coupling with nonelectrical systems, HTGRs present many advantages over traditional light water reactors and other advanced reactor designs. The High-Temperature, Gas-Cooled Test Reactor (HTGR-TR) is a point design developed by Idaho National Laboratory as a response to the need for the expansion of U.S. test reactor capabilities. The HTGR-TR was designed to serve as a test reactor for Generation-IV small modular prismatic block HTGRs and to provide irradiation data, two crucial contributions to the development of advanced reactors. As in any reactor design, it is necessary to understand the behavior of the reactor during accident scenarios to determine the overall safety of the design. Pressurized loss of forced cooling (PLOFC) and depressurized loss of forced cooling (DLOFC) are two accidents that can occur in HTGRs and that present challenges to decay heat removal. In order to understand the behavior of the fuel during these accidents, the resulting mechanical behavior and fission product migration in the fuel are evaluated. Using the HTGR-TR design, which utilizes tristructural isotropic (TRISO) fuel, a multiphysics analysis during the PLOFC and DLOFC transients was performed. This study utilizes neutronics, thermal hydraulics, and fuel performance modeling to analyze the behavior of TRISO particles during steady-state operation and the described transients. This analysis aims to characterize the hoop stress and strain during the transients, as well as predict fission product migration and radiological release. Due to the startup conditions of the HTGR-TR, the silicon carbide (SiC) layer for both of the transients and steady-state conditions are initially in compression for both the hoop stress and strain. The DLOFC transient at the beginning of cycle was the most challenging overall to the fuel, having the closest to tensile behavior and the closest to tensile strain. Because the integrity of the SiC layer was not challenged during any of the transients, the release of 90 Sr and 137 Cs was found to be negligible. The PLOFC transient at the end of cycle resulted in the largest 110m Ag release and subsequent radioactivity increase. However, the increase in radioactivity was minor when compared to typical operating conditions due to the relatively large diffusivity of 110m Ag though SiC at normal operating temperatures. Highlights include

Thermohydraulic Transient Studies of the Chinese 200mwe HTR-PM for Loss of Forced Cooling Accidents

Characteristic Behavior of Pebble-Bed Modular High-Temperature Gas-Cooled Reactor During Loss of Forced Cooling Accidents

Characteristics of the 250MW Pebble-Bed Modular High Temperature Gas-Cooled Reactor in Depressurized Loss of Coolant Accidents

Transient Coupling Analysis of Loss-of-coolant Accidents in HTR-PM Based on CFD Approaches

Study on Reactor Cavity Cooling System of HTR-PM in DLOFC Accident with TIN-CAVCO Code and SPECTRA Code

Study on the DLOFC and PLOFC Accidents of the 200 MWe Pebble-Bed Modular High Temperature Gas-Cooled Reactor with TINTE and SPECTRA Codes

Analysis of Diffusion Process and Influence Factors in the Air Ingress Accident of the HTR-PM

Multiphysics Analysis of PLOFC and DLOFC Accidents in the HTGR-TR

Loss of Flow Accident and Loss of Heat Sink Accident Analyses of the WCCB Primary Heat Transfer System for CFETR

Thermal hydraulic behaviors during loss of RHR system at mid-loop operation of Chinese 300MWe PWR NPP

Reactivity Accident Due to Control Rod Inadvertent Withdrawal of the 250mw High Temperature Gas-Cooled Reactor

Analysis Of Bypass Effect On A 250 Mw High Temperature Gas-Cooled Reactor

Analysis of Loss-of-Flow Accidents in Pre-Cooler and Inter-Cooler of HTR-10GT

Water-Ingress Accident of the 250mw Pebble-Bed Modular High Temperature Gas-Cooled Reactor

Preliminary Phenomena Identification and Ranking Tables on the Subject of the High Temperature Gas-cooled Reactor-Pebble Bed Module Thermal Fluids and Accident Analysis

Study on Air Ingress of the 200 MWe Pebble-Bed Modular High Temperature Gas-Cooled Reactor

CFD investigating the air ingress accident occurred in a HTGR_simulation of thermal-hydraulic characteristics

Preliminary Study on Thermal–hydraulic Behavior of Loss-of-flow Accident in Deep Pool-Type Nuclear Reactor

Reactivity accident in a high temperature gas-cooled reactor due to inadvertent withdrawal of control rod

Thermal Behavior of the HTR-10 under Combined PLOFC and ATWS Condition Initiated by Unscrammed Control Rod Withdrawal

Analysis on blow-down transient in water ingress accident of high temperature gas-cooled reactor