Abstract:This study aims to enhance the fuel cycle and fissile breeding performance of a sodium-cooled fast breeder reactor (FBR) by utilizing minor actinides (MAs) as a means of reactivity control alongside partially-inserted control rods. Choosing the PFBR-500 as the reference design, four core models, designated as Cases A, B, C, and D, utilizing various proportions of minor actinides (MAs) were built and simulated using OpenMC. The MA concentrations were optimized to compensate for the withdrawal of control rods and ensure the same initial reactivity for all cores. Burnup analysis over 365 EFPDs revealed a significant increase in cycle length and burnup for the modified cores along with a modest rise in breeding ratio. Notably, Case C, employing 3.45 wt.% MAs in the 88 inner-core fuel subassemblies achieved an extra 62.25 EFPDs cycle length, a 33.74% rise in single-cycle burnup, and a 3.86% increase in breeding gain compared to the reference. Loading MAs into the inner-core region proved to be more effective in enhancing both fertile-to-fissile conversion (thus extending the cycle length and fuel burnup) and transmutation than utilizing MAs throughout the core due to greater neutron flux at the core center. While Case D utilizing 2.2 wt.% MAs both in the inner and outer core fuel subassemblies had the highest overall MA loading, it demonstrated lower increments in cycle length, burnup, and breeding gain compared to Case C. Case C also exhibited the highest overall destruction rate (approximately 24%/y) for Np and Am isotopes, and successfully transmuted around 24.08 kg 237 Np, 9.33 kg 241 Am and 3.82 kg 243 Am over the course of a single year. The addition of MAs also achieved a slight flattening of the axial and radial flux profile and a decrease in the flux peaking factor. However, it slightly lowered the beta-effective, Doppler constant, and control rod assembly worth, and shifted the coolant void reactivity worth to the positive side.

Investigation of MA Content Effect on Kinetic Parameter in ADS Core

Minor actinides impact on basic safety parameters of medium-sized sodium-cooled fast reactor

Burnup study on the effective transmutation of minor actinides based on multi-enrichment fuel in the ADS subcritical reactor

The Influence Mechanism of Space-Time Kinetics of ADS Subcritical Reactor under Beam Transients

Development and Verification of Neutron Kinetics Parameter Calculation Program Applicable to Subcritical Systems of Long-Life Reactors

Optimization of Spatial Structure Designs of Control Rod Using Monte Carlo Code RMC

Neutronics and Thermal-Hydraulics Coupling Analysis in Accelerator-Driven Subcritical System

Calculation of Reactor Kinetic Parameters with Monte Carlo Method

Monte Carlo Approach of Effective Delayed Neutron Fraction by k-Ratio Method with External Neutron Source

Neutronic Characterization for a Pressurized Water Reactor Spent Fuel Assembly

Time-dependent variation of the neutron multiplication factor in spent fuel storage

Assessment of loading scheme and moderation impact on minor actinide transmutation in VVER-1000 fuel assembly

Simulation of the Irradiation-Induced Micro-Thermo-Mechanical Behaviors Evolution in Ads Nuclear Fuel Pellets

Monte Carlo Modeling of Isotopic Changes of Actinides in Nuclear Fuel of APR1400 Pressurized Water Reactor

The effect of burn up on the kinetic parameters for a pressurized water reactor fueled by MOX using MCNPX code

Investigation of target in C-ADS and IAEA ADS benchmark

Enhancing fuel breed-burn performance in a sodium-cooled fast reactor using a novel reactivity control method

Study of External Source Effects for Different Multibeam Concept for Accelerator-Driven Subcritical Reactor for Nuclear Waste Transmutation (ADS-NWT)

Study On Power Control Methodology Of The Accelerator Driven Sub-Critical Reactor System

Investigation Of Coal Reactivity Effects On A 1000-Mw Tangential Coal-Firing Boiler

Neutronic and thermal-mechanical coupling analyses in a solid-state reactor using Monte Carlo and finite element methods