Abstract:Heat pipe cooled reactors are solid-state, high temperature reactors with significant thermal expansion which influences the neutronics and thermal analyses. The heat pipe operating conditions determine the heat transfer rates and temperature distribution which then affect the core neutronic and thermal-mechanical behavior, especially during heat pipe failure accidents where the radial heat flux is uneven. A two-phase two-dimensional heat pipe model was developed and coupled to a previous neutronic and thermal-mechanical (N/T-M) model. The coupled neutronic, thermal-mechanical and heat pipe heat transfer (N/T-M/HP) strategy is described here with a focus on the iteration schemes, physical mapping and geometry reconstruction. The coupled N/T-M/HP method was then applied to the KRUSTY heat pipe cooled reactor, an experimental solid-state reactor designed to power space missions. The power distribution and reactivity predicted by the coupled method are validated against previous simulations for the KRUSTY design. The heat pipe model predictions are compared with heat pipe experiments which show that the predicted heat pipe wall temperature is within 30 K of the measured temperatures. A steady-state normal operating case and a single heat pipe failure accident were then simulated to show the redundancy and reliability of the solid-state reactor. For the normal case, the thermal-mechanical feedback is similar to 850 pcm from the cold state to the hot state. The heat transfer rate into each heat pipe is very stable during the iterations. For the single heat pipe failure accident, the heat pipes adjacent to the failure area are the most affected, with those heat loads increasing from 500 W to 640 W and an operating temperature rising by 16 K. In addition, the single heat pipe failure accident significantly increases the stress concentration in the fuel contacted with the failed heat pipe wall, with the peak stress increasing from 53 MPa to 80 MPa, which is very close to the yield stress. Therefore, the mechanical performance of the solid-state reactor should be carefully analyzed during design and operation.

Neutronic and thermal-mechanical coupling analyses in a solid-state reactor using Monte Carlo and finite element methods

Neutronic and Thermal-Mechanical Coupling Schemes for Heat Pipe Cooled Reactor Designs

Rmc/ansys multi-physics coupling solutions for heat pipe cooled reactors analyses

A new neutronics-thermal-mechanics multi-physics coupling method for heat pipe cooled reactor based on RMC and OpenFOAM

Full-scale Neutronic/thermal–hydraulic Coupling Analysis of Plate-Type Reactor Based on RMC and MOOSE

Multi-physics Coupling Analyses of Nuclear Thermal Propulsion Reactor

Research on RMC neutronics-thermal hydraulics coupling based on universal coupling methodology

Neutronics and Thermal-Hydraulics Coupling Analysis in Accelerator-Driven Subcritical System

Multi-physics coupling analysis on neutronics, thermal hydraulic and mechanics characteristics of a nuclear thermal propulsion reactor

Multi-Mesh Approach for Geometry-Independent Neutronic/Thermal-Hydraulics Coupling Analyses Using RMC and Ansys Fluent

Investigations of Multiphysics Models on a Megawatt-Level Heat Pipe Nuclear Reactor Based on High-Fidelity Approaches

Newly Developed Coupling Scheme in RMC with Internal Thermal Feedback and OTF Doppler-Broadening Method

Coupled Monte Carlo and Thermal-Hydraulics Modeling for the Three-Dimensional Steady-State Analysis of the Xi'an Pulsed Reactor

Study of the Thermal Expansion Effects of a Space Nuclear Reactor with an Integrated Honeycomb Core Design Using OpenMC and ANSYS

Neutronics/Thermal-hydraulics Coupling Analysis for the Liquid-Fuel MOSART Concept

An Internal Coupling Method Between Neutronics and Thermal-Hydraulics with RMC and CTF

Neutronics Analysis on High-Temperature Gas-Cooled Pebble Bed Reactors by Coupling Monte Carlo Method and Discrete Element Method

RMC - A Monte Carlo code for reactor physics analysis

NEUTRONIC/THERMAL-HYDRAULIC COUPLING ANALYSIS OF XI'AN PULSED REACTOR BASED ON RMC AND COBRA-TF

Coupled neutronic, thermal-mechanical and heat pipe analysis of a heat pipe cooled reactor