Abstract:As the core components of the power grid, the health condition of transformers directly affects the safe operation of the grid. Therefore, it is important to find effective methods to evaluate the internal early fault status of transformers. In order to clarify the characteristics of the physical parameters during the development of partial discharge of the inter-turn electrodes inside a transformer, we analyzed the differences between them and other partial discharge signal characteristics. Moreover, we established a research platform for the partial discharge characteristics of inter-turn electrodes in oil-paper insulation. The constant voltage is adopted in this series of tests. High voltage is applied on the inter-turn electrode specimens with different time length in different groups of tests. And we used high-frequency current coils, ultrasonic sensors, and ultra-high frequency sensors to synchronously measure various physical signals. The results indicate that the partial discharge of inter-turn electrodes can be divided into three stages: the initiation stage, the development stage, and the pre-breakdown stage. During the initiation stage, the conventional pulse current signals and ultra-high frequency signals appeared less frequently within one power frequency cycle. As the discharge progresses into the development stage, the discharge frequency increases rapidly, and the distribution of discharge points widens in phase. In the pre-breakdown stage, the discharge phase almost fills the entire power frequency cycle. The PRPD spectra of different physical signals during different experimental periods exhibit distinct morphological characteristics. Compared to traditional single detection methods, the comprehensive utilization of multiple physical signals enables a more accurate analysis of discharge characteristics. The present study analyzes the partial discharge characteristics of inter-turn electrode structures in oil-paper insulation, establishes a linkage between the discharge process and multiple physical signals, and provides data references and theoretical support for transformer condition assessment and early warning.

Design of Double Needles Defect Model in Oil Immersed Inverted Current Transformer and Its Partial Discharge Characteristic

Partial discharge diagnosis by simultaneous observation of discharge pulses and vibration signal

Partial Discharge Characteristics Of Needle-Plane Defect In Oil-Paper Insulation Under Actual Stress In Converter Transformers

Partial Discharge Characteristics of Needle-plate Electrodes in Aging Oil-paper Insulation Under Combined AC-DC Voltage

Measurement and Analysis for Pulse Current Shapes of Partial Discharge in Oil under DC Voltage

Primary Differential Pulse Method for Partial-Discharge Detection of Oil-Immersed Inverted Current Transformers

Partial Discharge of Needle-Plane Defect in Oil-Paper Insulation under AC and DC Combined Voltages: Developing Processes and Characteristics

Characteristics of Partial Discharge in Oil-paper Insulated Needle Plate Electrode Model Under Composite AC-DC Voltage

PD Mechanism Analysis in Oil-Pressboard Insulation with Needle-Plate Defect at Positive DC Voltage Based on Field-Circuit Joint Simulation

Study on pulse current of typical PD models in power transformer

PD Characteristics in Transformer Oil under AC Condition

TYPICAL PULSE SHAPE AND FREQUENCY CHARACTERISTIC OF THE PD SIGNAL IN OIL-PAPER INSULATION

Characteristics of Creeping Discharge Caused by a Needle Electrode in Oil-Pressboard Insulation under +DC Voltage

Developing Process of Partial Discharge in Oil-Paper Insulation under Needle-Plate Defects

Dielectric Loss Factor and Circuit Impedance under Partial Discharge Via Excess Current Detection

Assessment of stages of partial discharge process of typical oil-paper insulation defect under combined AC-DC voltage

Partial Discharge Characteristics over Differently Aged Oil/pressboard Interfaces

Modeling and analysis of partial discharge in needle plate oil gap under compound voltage

Partial Discharge Pulse Shape Detection and Analysis under DC Condition in Typical Defect Models

Measurement and Simulation of Partial Discharge in Disc-void of Oil-pressboard Insulation With Electrical Degradation Process

Analysis of Multi-Physical Signal Characteristics of Inter-Turn Oil-Paper Insulation Partial Discharge