Abstract:Internal insulation defects of oil-immersed transformers are common because of flaws in both manufacturing and transportation process. Partial discharge (PD) activity caused by insulation defects may occur at rated voltage condition, leading to deterioration of material, which results in breakdown of insulation. Feature parameters of PD are closely related to the performance of insulation materials. Therefore, the parameter changes under long-term AC voltage due to the decrease in electrical properties of material. It is effective to acquire insulation condition of materials by analyzing changes in the parameters of PD. The present thesis studied partial discharge in insulation defect of oil-paper insulation under long-term AC voltage. The PD tests were performed on specimens of 1 mm thickness which was placed between the needle-to-plane electrodes in an oil cup. The specimen was impregnated with oil in vacuum with treatment of hot air drying in order to remove moisture. Feature parameters of PD, such as phase-resolved partial discharge analysis and equivalent time-frequency, were recorded during the test process. When the feature parameters of PD are significantly changed, some specimens were removed. The surface appearance of these specimens was studied by scanning electron microscope. The measurement provides a theoretical basis for the analysis of the changes in the feature parameters of PD, which is helpful for the estimation of remaining life of insulation material. Test results indicate that as the AC voltage applied, cellulose depolymerisation continuously happened at the surface of paper. Cellulose in some area is carbonized by PD, and particulates are created. As the PD developed, the discharge magnitude is increased at the beginning while decreased rapidly just before breakdown of the paper, and the distribution phase of discharges is almost unchanged.

Characteristics of Creeping Discharge Caused by a Needle Electrode in Oil-Pressboard Insulation under +DC Voltage

Characteristics of Partial Discharge in Oil-paper Insulated Needle Plate Electrode Model Under Composite AC-DC Voltage

PD Pulse Waveform and Charge Distribution in Oil-Pressboard Insulation with Needle-Plate Model at Positive DC Voltage: Their Characteristics and Relationship

Partial Discharge Development in Needle-Plane Configuration of Oil-Paper Insulation under AC Voltage

The Influence of DC Component on the Creepage Discharge Paths in Oil-Pressboard Insulation Under AC-DC Combined Voltage

Development of partial discharge in oil-impregnated insulation and its effect

Partial Discharge of Needle-Plane Defect in Oil-Paper Insulation under AC and DC Combined Voltages: Developing Processes and Characteristics

Partial Discharge Characteristics of Needle-plate Electrodes in Aging Oil-paper Insulation Under Combined AC-DC Voltage

Measurement and Simulation of Partial Discharge in Oil-Paper Insulation under the Combined AC–DC Voltage

Partial Discharge Characteristics over Differently Aged Oil/pressboard Interfaces

Partition and Recognition of Partial Discharge Development Stages in Oil-Pressboard Insulation with Needle-Plate Electrodes under Combined AC-DC Voltage Stress

Surface partial discharge characteristics of oil-paper insulation under combined AC-DC voltage

Partial Discharge Characteristics on Pressboard Surface under Different DC Polarities

PD Mechanism Analysis in Oil-Pressboard Insulation with Needle-Plate Defect at Positive DC Voltage Based on Field-Circuit Joint Simulation

Degradation Characteristics of Oil-Immersed Pressboard Samples Induced by Partial Discharges under DC Voltage

Partial Discharge Characteristics of Uniform Gap in Oil-Impregnated Paper Insulation under Switching Impulse Voltage

Partial Discharge Characteristics Of Needle-Plane Defect In Oil-Paper Insulation Under Actual Stress In Converter Transformers

Evolution of Partial Discharge of Oil-Paper Insulation under Long-Term AC Voltage

Partial Discharge Simulation of Air Gap Defects in Oil-Paper Insulation Paperboard of Converter Transformer under Different Ratios of AC–DC Combined Voltage

Partial Discharge Characteristics in Pre-Breakdown Processes of Oil-Pressboard Insulation with Needle-Plate Defect under AC-DC Combined Voltage

Developing Process of Partial Discharge in Oil-Paper Insulation under Needle-Plate Defects