Abstract:DC circuit breakers are the key elements of DC grids.We studied the basic principle and its realization methods for DC circuit breakers.Firstly,the two basic ways of breaking DC current were discussed.Secondly,the realization methods based on the way by the series inserted infinite resistor were analyzed.Thirdly,according to the way by the series inserted capacitor,three DC circuit breaker structures were proposed.Finally,the economy of four DC circuit breaker structures were compared.The following conclusions can be drawn.(1) There are two basic ways of breaking DC current,namely the way by the series inserted infinite resistor and the way by the series inserted capacitor.For the former one,the maximum fault current appears at the moment of inserting the resistor.For the latter one,the maximum fault current appears after the capacitor is inserted for some time.(2) DC circuit breakers that have been used in practical engineering are based on the way by the series inserted infinite resistor.(3) The converters with DC fault handling capability are based on the way by the series inserted capacitor.(4) Three DC circuit breakers based on the way by the series inserted capacitor are proposed,including the single branch DC circuit breaker with series inserted capacitor,the double branch DC circuit breaker with series inserted capacitor,and the triple branch DC circuit breaker with series inserted capacitor.All these three DC circuit breakers can be employed to deal with DC faults effectively,but the single branch DC circuit breaker with series inserted capacitor has the shortest fault handling time.(5) Among the DC circuit breakers compared in this paper,the triple branch DC circuit breaker with a normal current path,a main transfer branch and a lumped series inserted capacitor,has the lowest cost.The results can provide references for the research and development of DC circuit breakers.

Overview of Simulation Research on Key Components of Air DC Circuit Breaker Used in Rail Transportation

Simulation On Power Characteristic Of Uhvdc During Commutation Failure And Dc Block

Electrical Performance Design for Circuit Breakers Based on Multi-domain Sequential Coupling

Research on Short-Circuit Characteristics of Subway DC Traction Power Supply System

Hybrid Mechanical-Static Dc Circuit Breaker And Dc Breaking

Research on Topological Structure and Simulation of Hybrid DC Circuit Breaker

Study on Basic Principle and Its Realization Methods for DC Circuit Breakers

Review of DC circuit breaker application

Simulation Study On The Control Valve In Hydraulic Operating Mechanism Of The High Voltage Circuit Breaker

Control strategy and experimental verification of hybrid DC circuit breaker

A Scheme for Current-limiting Hybrid DC Circuit Breaker

Simulation study on arc motion process of DC miniature circuit breakers

Analysis of Urban Rail DC Short Circuit Fault and Vehicle-Network Protection Coordination Based on Transient Characteristics

Relay protection simulation software of DC traction power system of urban rail transit

Two Basic Ways to Realise DC Circuit Breakers

Study on reliability improvement of current-transferring type HVDC circuit breaker

Simulation and Experimental Analysis of Arc Motion Characteristics in Air Circuit Breaker

A Fast LVDC Vacuum Hybrid Circuit Breaker: Dielectric Recovery and Design Consideration

Simulation and fault analysis of DC breaker in HVDC converter station

Research on Protection Coordination Between Flexible DC System and Breaker

Analysis of Breaking Overvoltage Characteristics of DC Circuit Breaker