Abstract:Among a variety of fiber sensors, the fiber Bragg grating (FBG) sensor has numerous advantages over other optical fiber sensors. One of the major advantages of this type of sensors is attributed to wavelength-encoded information given by the Bragg grating. Since the wavelength is an absolute parameter, signal from FBG may be processed such that its information remains immune to power fluctuations along the optical path. This inherent characteristic makes the FBG sensors very attractive for application in smart material structure, health monitoring field et al. But FBG sensors are sensitive to temperature and strain simultaneously; it is necessary to analyze the characteristics of temperature and strain of FBG applied for smart structure. Short overview of the FBG sensing principle as well as theoretical analyses is presented at first; then the paper proposes a simple, convenient, and low cost experimental method to verify the performance of FBGs. The improved high-accuracy experimental instrument of thermal deformation, which consists of an accurate temperature controlling and measuring subsystem, supporting and adjusting subsystem, collimating and positioning subsystem and fine motion and measuring sub-system, is simply introduced. The proposed experimental method involves bonding one uniform FBG to the center of the pole, which is about 89.5mm long; another FBG temperature sensor is free in the temperature-control box. The temperature in the box is -20°C-+50°C is adjusted according to experimental schedule. The characteristics of the FBG are analyzed by actual datum, which are simultaneously collected by a PC through a FBG interrogator. Comparing the data of FBG bonded to the pole with another FBG temperature sensor in the free state, the characteristics of the temperature and the thermal strain of the FBG can be obtained. The experimental result shows the FBGs used to the smart material have good agreement characteristics with theoretical calculation of the FBGs.

Study on FBG sensor for satellite ambient temperature monitoring

Research On Measurement Of Fiber Bragg Grating Considering The Cross-Sensitivity Of Temperature And Strain

A Novel Temperature-Independent Double Fiber Bragg Grating Strain Sensor

An FBG Sensor Placement Method to Achieve Long Fatigue Life and High Measurement Accuracy in Deformation Sensing of Satellite Solar Panels

Ultrasensitive Parallel Double-Fpis Sensor Based on Vernier Effect and Type II Fiber Bragg Grating for Simultaneous Measurement of High Temperature and Strain

Monitoring the Shape of Satellite Wing Frame Using FBG Sensors in High Electronic Noise, Vacuum, and −196 °C Environment

Design and Analysis of a Combined FBG Sensor for the Measurement of Three Parameters.

Research on sensitized Fiber Bragg Grating temperature sensor based on bimetal three-substrates

Study on the Optical Characteristic of FBG Temperature Sensor

Fiber Bragg grating temperature sensor for marine application

Quasi-distributed temperature sensor system based on various-packaged FBG

A Temperature and Strain Sensor Based on a Cascade of Double Fiber Bragg Grating

Fiber Bragg Grating Packaged Temperature Sensor Without Exterior Load Affection

Mechanical Characteristic Analysis of Special Hybrid Adhesive-Packaged FBG Strain Sensor at Liquid Helium Environment

Performance Analysis and Experimental Verification for Fbg Sensors Applied for Smart Structure

Temperature-Insensitive Embedded Metal-Packaged Fiber Bragg Grating Inclination Sensor

An embedded FBG sensor for simultaneous measurement of stress and temperature

The Improvement of Temperature Sensitivity by Eliminating the Thermal Stress at the Interface of Fiber Bragg Gratings

Temperature-Insensitive Strain Sensor Based on the Measurement of Reflected Bandwidth from Tapered Fiber Grating by A Scanning Fbg

The Temperature Compensation of FBG Sensor for Monitoring the Stress on Hole-Edge

Development of a High-Sensitivity and Adjustable FBG Strain Sensor for Structural Monitoring