Abstract:Among a variety of fiber sensors, the fiber Bragg grating (FBG) sensor has numerous advantages over other optical fiber sensors. One of the major advantages of this type of sensors is attributed to wavelength-encoded information given by the Bragg grating. Since the wavelength is an absolute parameter, signal from FBG may be processed such that its information remains immune to power fluctuations along the optical path. This inherent characteristic makes the FBG sensors very attractive for application in smart material structure, health monitoring field et al. But FBG sensors are sensitive to temperature and strain simultaneously; it is necessary to analyze the characteristics of temperature and strain of FBG applied for smart structure. Short overview of the FBG sensing principle as well as theoretical analyses is presented at first; then the paper proposes a simple, convenient, and low cost experimental method to verify the performance of FBGs. The improved high-accuracy experimental instrument of thermal deformation, which consists of an accurate temperature controlling and measuring subsystem, supporting and adjusting subsystem, collimating and positioning subsystem and fine motion and measuring sub-system, is simply introduced. The proposed experimental method involves bonding one uniform FBG to the center of the pole, which is about 89.5mm long; another FBG temperature sensor is free in the temperature-control box. The temperature in the box is -20°C-+50°C is adjusted according to experimental schedule. The characteristics of the FBG are analyzed by actual datum, which are simultaneously collected by a PC through a FBG interrogator. Comparing the data of FBG bonded to the pole with another FBG temperature sensor in the free state, the characteristics of the temperature and the thermal strain of the FBG can be obtained. The experimental result shows the FBGs used to the smart material have good agreement characteristics with theoretical calculation of the FBGs.

Performance Analysis and Experimental Verification for Fbg Sensors Applied for Smart Structure

Structural Instability-Enabled Mechanical Sensors Using Fiber Bragg Grating

Research On Measurement Of Fiber Bragg Grating Considering The Cross-Sensitivity Of Temperature And Strain

A Novel Temperature-Independent Double Fiber Bragg Grating Strain Sensor

Progress and Prospect of Fiber Bragg Grating Sensors Measurement Technology ( I ) : Strain and Temperature Measurement

Temperature and strain characteristic analysis of fiber Bragg grating sensor

Design and Analysis of a Combined FBG Sensor for the Measurement of Three Parameters.

A Temperature and Strain Sensor Based on a Cascade of Double Fiber Bragg Grating

Fiber Bragg Grating Sensors in Civil Engineering Applications

Test System for Temperature and Strain Based on New FBG Sensor

A study on fiber Bragg grating (FBG) strain sensor based on symmetrical lever structure

Optical FBG's Sensing Properties and Practical Application in Civil Infrastructures

Study on smart FBG sensors and their applications in civil engineering

Study of a Long-Gauge FBG Strain Sensor with Enhanced Sensitivity and Its Application in Structural Monitoring

Strain Transfer Mechanism of Quadrate-Packaged FBG Sensors Embedded in Rectangular Structures

Temperature-controlled Fiber Bragg Grating Dynamic Strain Detection System

Temperature-Insensitive Strain Sensor Based on the Measurement of Reflected Bandwidth from Tapered Fiber Grating by A Scanning Fbg

Temperature Compensation of Fiber Bragg Grating Sensors in Smart Strand

Development and Performance Research of Fbg Strain Sensor for Monitoring on Asphalt Concrete Pavement

Simultaneous Measurement of Temperature and Strain Based on Compact Parallel Core–Cladding FBGs Inscribed by Femtosecond Laser Point-by-Point Method

Strain Transfer Analysis of a Clamped Fiber Bragg Grating Sensor