Abstract:<p>During laser powder bed fusion additive manufacturing, laser power absorption is governed by a protean pool of molten metal that can present as a highly reflective surface, a deeply absorbing cavity, or some amalgamation thereof. These melt pool dynamics have been linked to defect creation, porosity, and surface finish quality. Although these are therefore critical for determining final part quality, their instantaneous influence on laser absorption have only been explored through simulation. To date, direct real-time observations have been elusive due to the locally extreme environment. In this work, we focus a laser on Ti-6Al-4V powder and bare plate while quantifying the time-dependent, absolute energy absorption by monitoring omnidirectional backscattered laser intensity. We also simultaneously record the projective melt pool geometries with high-speed synchrotron x-ray imaging. We find that laser absorption strongly reflects the stability of the vapor depression over a wide range of applied laser powers, oxygen content in the processing atmosphere, and with the presence of powder. During laser scanning of a powder bed surface, we find a significant absorption reduction after 400 µs due to a dramatic change in the vapor depression aspect ratio – an event known to create porosity. As several industrial scan strategies necessitate thousands of these events during a build, their identification and control is of significant practical importance. Lastly, a normalized enthalpy model is demonstrated to be effective in quantifying the relationship between the laser absorption and cavity depth, even under transient conditions. In addition to providing vital quantitative data for simulation calibration, the correlation of melt pool geometry with laser absorption during realistic processing conditions suggests the use of a total backscattered light detection system for real-time process control.</p>

Spectral Analysis of Laser Induced Plasma in Laser Additive Manufacturing

In-Situ Monitoring of Laser Additive Manufacturing for Al7075 Alloy Using Emission Spectroscopy and Plume Imaging

Energy Coupling Mechanisms and Scaling Behavior Associated with Laser Powder Bed Fusion Additive Manufacturing

The causal relationship between melt pool geometry and energy absorption measured in real time during laser-based manufacturing

Investigation into the optical emission of features for powder-bed fusion AM process monitoring

Analysis of Melt Pool Characteristics and Process Parameters Using a Coaxial Monitoring System during Directed Energy Deposition in Additive Manufacturing

Laser-metal interaction dynamics during additive manufacturing resolved by detection of thermally-induced electron emission

Sub-surface thermal measurement in additive manufacturing via machine learning-enabled high-resolution fiber optic sensing

In-situ Characterization and Quantification of Melt Pool Variation under Constant Input Energy Density in Laser Powder Bed Fusion Additive Manufacturing Process

Investigation of plasma spectra during selective laser micro sintering Cu‐based metal powder

Understanding Melt Pool Behavior of 316L Stainless Steel in Laser Powder Bed Fusion Additive Manufacturing

Power Density Distribution for Laser Additive Manufacturing (SLM): Potential, Fundamentals and Advanced Applications

Transient Dynamics of Powder Spattering in Laser Powder Bed Fusion Additive Manufacturing Process Revealed by In-Situ High-Speed High-Energy X-Ray Imaging

In-situ High-Speed X-ray Imaging of Piezo-Driven Directed Energy Deposition Additive Manufacturing

Post-traumatic metabolism: a multidisciplinary challenge.

Experimental and computational study on thermal and fluid behaviours of powder layer during selective laser melting additive manufacturing

Study on the influence of laser power variation on the temperature Field of laser additive manufacturing Airport fuel supply pipe network

Effect of Focusing Condition on Laser Energy Absorption Characteristics in Pulsed Laser Welding

Improvement of Spectral Intensity and Resolution with Fiber Laser for On-Stream Slurry Analysis in Laser-Induced Breakdown Spectroscopy

Quantitative analysis and experimental study of the influence of process parameters on the evolution of laser cladding