Design of photo-detector in laser particles sizing

Shuangbao Yang,Yongcai Guo,Chao Cao,Xu Ning

DOI: https://doi.org/10.3969/j.issn.0253-2743.2001.03.015

2001-01-01

Abstract:Laser diffraction particles sizer is widely used.Its accuracy and results are mainly determined by photo-deteector.So it is important to study the design of photo-detctor.This paper gives a revised design of the special photo-detector and discuss its effect on the measure result.

What problem does this paper attempt to address?

Theoretical Analysis Of The Gauge Laser Sensor And Several Design Parameters

Zf Zhang,Qb Feng,Sq Chen,Cf Kuang

2005-01-01

Abstract:Using a pulsed laser diode as the emitting light source and a quadrant photodiode detector as the receiving unit, we have developed a new type of laser gauge sensor based on triangulation measurement principle. The sensor can be used for dynamic measurements with a high sensitivity and accuracy, and it has the measurement range of 10 mm. Several parameters of the sensors were given in the paper.
Research on the Gauge Sensor Laser Spot

CHEN Shi-qian,ZHANG Zhi-feng,KUANG Cui-fang

DOI: https://doi.org/10.3969/j.issn.1001-5078.2006.05.018

2006-01-01

Abstract:Based on the quadrant photodiode detector and triangulation method,a novel laser displacement sensor wis proposed for the gauge measurement.The laser sensor adopts the infrared laser and the quadrant photodiode to avoid the disturb.To adjust the infrared laser to the optimal place,we analyze and calculate the relation between the laser spot and the laser place.
Research on a Novel Laser Displacement Sensor used for Gauge Measurement

Zhi-feng ZHANG,Qi-bo FENG,Shi-qian CHEN,Cui-fang KUANG

DOI: https://doi.org/10.3321/j.issn:1000-1158.2006.z1.049

2006-01-01

Abstract:Based on the quadrant photodiode detector and triangulation method, a novel laser displacement sensor is proposed for the gauge measurement. According to the optic structure, the mathematical model is established. The theoretical analysis and the preliminary experimental results approve its practicability. The sensor measurement range is ± 10 mm, in which the correlation coefficient R is 0.99723. The sensor resolution is 0.1 mm, which can be suitable to the gauge dynamic measurement. This novel displacement sensor has been put in operation.
A High-Precision Laser Displacement Measurement System

Wenqing Pan,Cui Liang,Chao Ma,Dengwei Zhang,Xiaowu Shu,Shuangliang Che,Huizhu Hu

DOI: https://doi.org/10.1117/12.2606551

2021-01-01

Abstract:The rapid development of modern science and technology puts forward higher and higher requirements for displacement measurement. As a non-contact measurement technology, laser ranging has played an important role in various fields for the unique advantages and has become a hot topic in the field of measurement research. At present, there are little research on high-precision displacement measurement at medium and long distance, the needs of which are widespread in practical application, so this work has important value. Among various laser ranging technologies, the laser triangulation method has the advantages of high-speed, high precision, simple structure, etc. Therefore, this paper chooses the direct laser triangulation method to carry out the research after analyzed the common types of laser triangulation system. In view of the requirements of high-precision displacement measurement requirements at medium and long distance, this article discussed the design of laser triangulation measuring system and the selection of structural parameters. Then we proposed a direct laser triangulation measurement structure under Scheimpflug conditions. This system selects PSD displacement transducer to collect the position information of the scattered light spot. After that, this paper discusses the principle of laser triangulation distance measurement and simulates the system. Then the influence of different parameters on high-precision displacement measurement and the relationship between them are investigated. Based on the research talked above, we got a set of structural parameters of the displacement measurement system. The measurement accuracy can be ~micron with the working distance of 500mm.
Design of Focusing System in Laser Pattern Generator

Yi-yong LIANG,Jian BAI,Guo-guang YANG

DOI: https://doi.org/10.3321/j.issn:1005-0086.2005.10.015

2005-01-01

Abstract:In order to improve the accuracy and efficiency of fabricating lines with laser pattern generator,a novel focusing system was designed.Focusing system is based on optical off-axis detection principles.The detector is a two-quadrant photocell,and the defocus signal is constructed by division.Focusing system has the characteristic of second-order system with overdamp.The new embedded PID controller improves the performance of focusing system and upgrades the closed-loop precision to 0.2 μm.Furthermore,focusing system has the fabrication capabilities for variable-width lines under various defocus amount.
Localized Surface Plasmon Resonance Enhanced Photodetector: Physical Model, Enhanced Mechanism and Applications

Jiangtong Su,Xiaoqi Hou,Ning Dai,Yang Li

DOI: https://doi.org/10.1007/s11467-024-1413-8

2024-01-01

Frontiers of Physics

Abstract:Localized surface plasmon resonance (LSPR) is an intriguing phenomenon that can break diffraction limitations and exhibit excellent light-confinement abilities, making it an attractive strategy for enhancing the light absorption capabilities of photodetectors. However, the complex mechanism behind this enhancement is still plaguing researchers, especially for hot-electron injection process, which inhibits further optimization and development. A clear guideline for basic physical model, enhancement mechanism, material selection and architectural design for LSPR photodetector are still required. This review firstly describes the mainstream understanding of fundamental physical modes of LSPR and related enhancement mechanism for LSPR photodetectors. Then, the universal strategies for tuning the LSPR frequency are introduced. Besides, the state-of-the-art progress in the development of LSPR photodetectors is briefly summarized. Finally, we highlight the remaining challenges and issues needed to be resolved in the future research.
Design and Research of In-process Particle Size Measurer

Gong Dacheng,Xiang Zhanqin,Pan Xiaohong,Lv Fuzai

2006-01-01

Abstract:In-process measurement of particle size of metal material is a difficulty problem,and this problem remains unresolved for a long time.A new method is brought out to measure particle size distribution(PSD),which is based on the integration of physics measurement and statistics theories.By methods of mathematics,the relationship between percentage of under certain size of metal material particles and the output value of this new type particle size measurer is worked out,and through corresponding devices and method,the existence of this relationship is proved by the results of experiments.The function between the two variables is given by regression analysis,at last,the error in this new method is analyzed and the way of improving is given.
Design and analysis of laser photoelectric detection sensor

Xiaoqian Zhang,Hanshan Li,Shanshan Zhang

DOI: https://doi.org/10.1002/mop.33011

IF: 1.311

2021-08-25

Microwave and Optical Technology Letters

Abstract:In order to solve the problem of unstable detection and low detection ability of traditional photoelectric detection target in complex environment, a design method of laser photoelectric detection sensor is proposed. Laser photoelectric detection sensor with active and passive laser detection screen is formed by adding line laser to the traditional photoelectric detection target. According to the characteristics of laser echo energy when the projectile passing through the laser detection screen, the calculation model of the laser echo power received by the photoelectric detector under the random intersection of projectile and target is established, and the signal-to-noise ratio calculation function of the system is derived. Through the comparative test, the results show that the detection ability of the laser photoelectric detection sensor is obviously better than that of the traditional photoelectric detection target, especially in the low illumination environment; moreover, the signal-to-noise ratio of the laser photoelectric detection sensor still follows the law of decreasing with the increase of detection distance, and it keeps the detection characteristics of photoelectric detection system. By increasing the laser emission power, the signal-to-noise ratio of the laser photoelectric detection sensor is improved to a certain extent, and the detection ability of the system is improved. The results verify that the design method and theoretical model of photoelectric detection sensor proposed in this paper are scientific and feasible.

engineering, electrical & electronic,optics
Design of New Optical Sensor for Particle Counter

Xin SHI,Yue HAN,Sihong DING,Bing DAI

DOI: https://doi.org/10.3969/j.issn.1004-1699.2018.01.006

2018-01-01

Abstract:Aiming at the problems of the existing optical particle counter sensor easily being affected particle shape, refractive index and photosensitive location,a new optical particle counter sensor was designed. First of all,a rota-tional symmetry elliptic cavity mirror was used for expanding acceptable scope of space angle,reduced the effects of particle shape and refractive index. Based on the T matrix theory,the relationship between the particle size and scat-tering luminous flux were simulated and computed for non spherical particles of the different refractive index,differ-ent shape and different orientation. The results showed, under the condition of different refractive index, different shape and different spatial orientation,the relationship between the received luminous flux and the particle size re-vealed a good monotonic. It indicated the system reduced the effects of particle shape and refractive index,and had a better effect than other existing systems. Secondly,the combination system of aspheric lens-cylindrical lens was used for improving the uniformity of laser intensity,reducing the effects of different position in the photosensitive ar-ea. The simulation calculation showed that after using the combination of optical devices,the uniformity of light in-tensity was significantly increased,and the negative impact of different location in the photosensitive area is largely eliminated. Then,the overall structure of the sensor is introduced. Finally,the experiment confirmed that the sensor has better performance. This sensor also had the structure simple,portable and inexpensive advantages,and higher application value.
Design and research of microfluidic chips detection instrument with high SNR

En-lin CAI,Zhao-feng CEN,Xiao-tong LI,Yi-qun LIN

DOI: https://doi.org/10.3969/j.issn.1005-5630.2005.05.026

2005-01-01

Abstract:In this paper the concept of microfluidic chips and the corresponding detection systems are first introduced.Discussion is mainly focused on designing a kind of detection instrument with high signal-to-noise ratio(short for SNR),and on laser induced fluorescence(short for LIF),the confocal theory and other technical design keys in circuit filter,amplification,structure design,software design and so on.The instrument has converged optical,mechanics,electrodynamics,computers,and other courses.A series of tests prove this instrument is with high performances,easy to carry and with high SNR.Its performance can reach 10~(-9)nmol/L.
Laser Scattering Particle Size Measurement Technique and Applications

JP Wang,SZ Xie,YM Zhang,W Li

DOI: https://doi.org/10.1117/12.401743

2000-01-01

Abstract:The laser scattering particle size measurement technique is studied in this paper. An improved projection iterative algorithm is proposed to retrieve the particle size distribution from the scattering light energy. Experiments are made with spray droplet and standard multi-peak particles, which demonstrate the effectiveness of the measurement technique.
Design on Optical System of the Detector Based on No Target Extinction-Ratio Measurement

WAN Qiang,SUN Bin,ZHANG Jing,GUO Yan-long,WANG Xiao-bing,XU Li-xin

DOI: https://doi.org/10.3969/j.issn.1007-2276.2008.01.022

2008-01-01

Infrared and Laser Engineering

Abstract:A new test and measurement method,no target extinction-ratio measurement of the range-finding capability is proposed in this paper.The laser emission capability and reception capability are measured separately in our method.It is immune to the ambient condition variation,and can implement measurement accurately and rapidly.The design of the detector′s optical system is also provided.Applications show that the design is automatical and quick for many kinds of laser range-finder,and has the characteristics of compact structure,protability,high reliability,which is especially suitable to the application of the field operations.
Research on Influencing Factors of Detection Accuracy Based on Laser Seeker

Shuo Liu,Zhiguo Liu,Shicheng Wang,Xiong Qiu

DOI: https://doi.org/10.1088/1742-6596/1087/5/052039

2018-01-01

Journal of Physics: Conference Series

Abstract:In view of the factors affecting the accuracy of laser seeker detection, the working principle of laser seeker receiving laser signal was analysed. The laser convergence route of the optical system was studied. And the working principle of the quadrant detector (QD) is also analysed centrally. The influence of the light spot size and position, and also the different light spot pattern and the response consistency on the detection accuracy of the quadrant detector were analysed theoretically, and the simulation was verified by MATLAB. The results showed that when the light spot was half the size of the QD, the sensitivity and linearity of the detector were best. The quadrant detector had the characteristics of inconsistent response. The characteristics of response conformance was obtained by using mathematical method, so that the effect of its error was negligible by analysis.
Research Based on QPD Single-lens Micro-angle Measurement System and Its Key Technology

JIN Wei-feng,LIAN Meng-dong,JU Bing-feng

DOI: https://doi.org/10.3969/j.issn.1005-2895.2011.03.016

2011-01-01

Abstract:A single-lens micro-angle measurement system,which used QPD as position-sensing device is introduced in this paper.In the research,lots of its key technologies about the system have been analyzed such as adopted optical principle,the option and defocussing setting of optical devices like photoelectric detector and calculation and analysis of the feasibility of small size and so on.Through these research,the possibility of designing a compact and portable micro-angle measurement system with high sensibility and small volume was confirmed.Furthermore,the measurement range and accuracy of this micro-angle measurement system are obtained by experiment.
Optimization of Laser Induced Fluorescence Detection System for Integrated Capillary Electrophoresis Chip

Y Li,Zf Cen,Zk Bao,Xt Li

2002-01-01

Abstract:A laser induced fluorescence (LIF) detection system of transmission type optical path is described. To improve the performance of the detection system, confocal technique is used. For an ICE chip of certain size, some factors that are very important for the performance of the instrument are presented. The choice of the objective, the size of the pinhole and the intensity of the laser beam all influence SNR of the signal significantly. The diagrams, which show these relationships of these factors, are displayed.
Design of a high counting efficiency sensor for 1.0 cubic feet per minute laser particle counter

Yanchang Zheng,Guo Wu,Yesheng Chen,Yuelin Lu,Cheng Li,Guibo Wan,Rongxin Yin

DOI: https://doi.org/10.1063/5.0156083

2023-09-01

Abstract:Based on the theory of Mie scattering, an optical sensor for a 1.0 cubic feet per minute laser particle counter is developed in this paper. First, an illumination optical path relying on aspherical lens and cylindrical lens for laser shaping was designed, and a narrow optical spot with the illumination in the vertical direction of the photosensitive area approximately distributed as a flat top was obtained. Second, the scattering light path was designed by using the theory of Mie scattering and geometric optics method. Then, the structure of the sampling air path was designed with reference to the principle of Laval nozzle, and the particle flow trajectory was verified by simulation using the fluid dynamics software Ansys Fluent. Finally, the performance of the optical sensor was measured with polystyrene latex (PSL) particles, and the results showed that the counting efficiency of the 0.3 μm particle size channel met the requirement of 50% ± 20% and the 0.5 μm particle size channel met the requirement of 100% ± 10%, which complied with the ISO 21501-4 standard.
The Effect of the Photoelectric Detector on the Accuracy of the Spectrometer

HD Yang,L Xu,KX Chen,QS He,SR He,QF Tan,GF Jin

DOI: https://doi.org/10.3321/j.issn:1000-0593.2005.09.039

2005-01-01

Abstract:An optimized photoelectric detector will increase the precision of a spectrometer, thus indicates an important way to develop high performance spectrometer. With an eye to this, a model describing the process that spectrogram is integrated and sampled by photoelectric detector and restored after low-pass filtering is developed. Based on the model, the influence of the characteristic parameters of the detector on the spectral line in the frequency domain is analyzed and the relation between the full width half maximum (FWHM) of the spectra line and the integral interval, sampling space and sensitivity of the detector is deduced. The conclusion indicates that both the integral interval and sampling space should be 1/6 of the FWHM for a spectral line with gaussian profile as a result of compromise between accuracy and feasibility. Moreover, the critical point deciding the right situation for scanner and array detector is given. Other guide line to optimize the photoelectric detector and increase accuracy is suggested also.
An Improved Phase Detection Method for Laser Guide Systems Using Position Sensitive Detectors

Yazhe Li,Kai Zhou,Zhen Zhang

DOI: https://doi.org/10.1109/lsens.2018.2835669

2018-01-01

IEEE Sensors Letters

Abstract:In this article, an improved phase detection method is proposed for laser guide systems using position sensitive detectors. The key of the method is the detection of phase differences. To deal with the nonmonotonic output behavior, a phase shift process is introduced instead of complicated hardware implementation in conventional methods. Moreover, the phase shift process moves the measurement zone of relatively large measurement error to the zone of small error. Compared with the conventional methods, the phase shift process requires fewer modules and connections and reduces measurement error, whereas the parallel phase comparison design provides a higher sensitivity. The experimental results show the effectiveness for measurement error and sensitivity of the proposed method.
Design and Detection Calculation Model of Laser Photoelectric Detection Target With Array Lens and High-Power Line Laser

Hanshan Li,Xiaoqian Zhang,Xuewei Zhang,Junchai Gao

DOI: https://doi.org/10.1109/jsen.2021.3116024

IF: 4.3

2021-11-01

IEEE Sensors Journal

Abstract:Under the condition of low illumination, the traditional sky screen has low detection ability, which cannot meet the detection and test needs of dynamic projectile's parameter in weapon field. In order to solve this problem, this paper proposes a design method of laser photoelectric detection target with array lens and high-power line laser, this method mainly uses the high-power line laser to form a fan-shaped laser light source with a certain thickness, and combines the fan-shaped laser light source plane and the receiving detection screen plane to form a laser detection screen. The array meso-lens is introduced to design the laser detection screen of receiving optical path with wide-angle. A high sensitivity array photodetector is used to capture the laser reflection information of projectile when it passes through the laser detection screen. According to the characteristics of the designed laser detection screen, this paper studies the calculation method of laser reflected energy of projectile, establishes the calculation model of laser reflection power of projectile and derives the signal-to-noise ratio calculation function of laser photoelectric detection target. Through the experimental test, the results show that compared with the traditional sky screen, the field of view of the designed laser photoelectric detection target is significantly increased, and the signal-to-noise ratio of the photoelectric detection is significantly higher than the traditional sky screen in low illumination environment.

engineering, electrical & electronic,instruments & instrumentation,physics, applied
Design Of High Precise Focusing System In Laser Direct Writer

Y. Y. Liang,F. Tian,J. B. Luo,G. G. Yang

DOI: https://doi.org/10.1088/1742-6596/48/1/192

2006-01-01

Abstract:In order to improve the accuracy and efficiency of fabricating lines with laser pattern generator, a novel focusing system was designed. Focusing system is based on optical off-axis detection principle. The detector is a two-quadrant photocell and the defocus signal is constructed by division. Focusing system has the character of second-order system with overdamp. The new embedded PID controller improves the performance of focusing system and upgrades the closed-loop precision to 0.2 mu m. Furthermore focusing system has the fabrication capabilities for alterable-width lines under various defocus amount.

Design of photo-detector in laser particles sizing

Theoretical Analysis Of The Gauge Laser Sensor And Several Design Parameters

Research on the Gauge Sensor Laser Spot

Research on a Novel Laser Displacement Sensor used for Gauge Measurement

A High-Precision Laser Displacement Measurement System

Design of Focusing System in Laser Pattern Generator

Localized Surface Plasmon Resonance Enhanced Photodetector: Physical Model, Enhanced Mechanism and Applications

Design and Research of In-process Particle Size Measurer

Design and analysis of laser photoelectric detection sensor

Design of New Optical Sensor for Particle Counter

Design and research of microfluidic chips detection instrument with high SNR

Laser Scattering Particle Size Measurement Technique and Applications

Design on Optical System of the Detector Based on No Target Extinction-Ratio Measurement

Research on Influencing Factors of Detection Accuracy Based on Laser Seeker

Research Based on QPD Single-lens Micro-angle Measurement System and Its Key Technology

Optimization of Laser Induced Fluorescence Detection System for Integrated Capillary Electrophoresis Chip

Design of a high counting efficiency sensor for 1.0 cubic feet per minute laser particle counter

The Effect of the Photoelectric Detector on the Accuracy of the Spectrometer

An Improved Phase Detection Method for Laser Guide Systems Using Position Sensitive Detectors

Design and Detection Calculation Model of Laser Photoelectric Detection Target With Array Lens and High-Power Line Laser

Design Of High Precise Focusing System In Laser Direct Writer