Abstract:Compared with the four-phase optical structure, the grating encoder based on two-phase optical structure reduces the number of optical devices used in the system and makes the system more compact. Due to the high requirements for realtime and parallel processing of algorithm solution, the powerful parallel computing ability of Field Programmable Gate Array (FPGA) and customized hardware acceleration algorithm are needed to improve the real-time performance. In the previous research, the displacement signal generated by the grating encoder can be input into the FPGA through analog to digital converter (ADC) sampling, and then complete self-designed filter filtering, phase correction and displacement solution. In this paper, further, the ADC sampling rate adjustable interface is added to the FPGA, the global signal and the dc offset remove algorithm is added, and the displacement solution results in the form of fixed-point number are output to the host computer through the MicroBlaze (MB) soft core. MB core can realize process control and interface conversion on FPGA, and use a small amount of logic resources to replace the functions of MCU and DSP of traditional embedded measurement system, so as to further improve the integration of the instrument. A series of experiments are carried out on the two-phase FPGA platform. ADC sampling rate is 200ksps, 8-Channel synchronous parallel sampling, FPGA system clock frequency is 200MHz. The linear displacement table is set to drive the measurement grating at different displacement speeds, and the total stroke is set to 10mm. The FPGA real-time displacement solution platform is tested. The experimental results show that FPGA obtains accurate displacement solution results under different speed tests. In the test of 2 mm/s, the maximum cumulative displacement measurement error is 5um, which shows the real-time performance and accurate displacement solution performance of FPGA platform.

FPGA Implementation of Laser Energy Rapid Scanning Measurement System

Intelligent Measuring System for Performance Parameters of Laser Range Finder

High speed video signal acquisition and processing system based on FPGA technique

Design of Structured Light Depth Detection System Based on FPGA

FPGA Implementation of High-Speed Data Acquisition System for High-Resolution Millimeter Wave Radar.

Design and implementation of embedded signal processing system based on pulsed laser ranging technology

Laser Distance Finder Based on FPGA and DDS

FPGA displacement calculation platform and test of two-phase grating interference encoder

FPGA-Accelerated Distributed Sensing System for Real-Time Industrial Laser Absorption Spectroscopy Tomography at Kilo-Hertz

Design of data acquisition system for distributed optical fiber sensor

Interference Peak Detection Based on Fpga for Real-Time Absolute Distance Ranging with Dual-Comb Lasers

Data Acquisition and Performance Analysis of Image-Based Photonic Encoder Using Field-Programmable Gate Array (FPGA)

FPGA based demodulation of laser induced fluorescence in plasmas

FPGA-based measurements of the relative arrival time of a high-repetition rate, quasi-cw fourth generation light source

Real-time high-precision FMCW laser range extraction method based on a hardware multiplier array

Design and Implementation of FPGA-based High-speed Phase Detector in Single-frequency Laser Interferometer

Design and Implement of Nanosecond Laser Micromachining System

A MEMS-based real-time structured light 3-D measuring architecture on FPGA

Design of an FPGA-Based Controller for Fast Scanning Probe Microscopy

High speed FPGA-based Phasemeter for the far-infrared laser interferometers on EAST

Implementation of a Data Processing Platform for Real-Time Distance Measurement with Dual-Comb Lasers