Abstract:An effective source reconstruction method (SRM) to predict the noise coupling from an unknown electromagnetic interference (EMI) source inside a shielding enclosure is proposed in this work. On account of the difficulty and time-consuming in phase measurement of near-field, the magnitude-only near-field scanning is employed to obtain the near-field above EMI sources in free space, and the leakage near-field from the slots and/or holes of a shielding enclosure after the EMI source is inserted into the enclosure. The infinitesimal dipole is used as the equivalent source of the EMI source. The proposed method can generally be divided into three steps. First, the positions and initial moments of the equivalent dipoles of an unknown EMI source without any shielding enclosure are derived by using dynamic differential evolution (DDE) algorithm. Second, the obtained dipoles are thereafter placed into an arbitrarily shaped shielding enclosure, and the full-wave simulation is implemented to build the relationship between the dipoles and the measured leakage field from the slots/holes of the shielding enclosure. Third, the dipole moments are thereby optimized by using the DDE method again based on the magnitude-only leakage field. It is worth highlighting that only a relatively small region of near-field on the leakage plane is sufficient for obtaining an effective equivalent dipole model in the shielding enclosure. The results of numerical simulation and physical measurement have verified the effectiveness of the proposed SRM for modeling unknown EMI sources in a shielding enclosure.

Design and application of flexible shielding material based reverberation chamber

Reverberation Chamber Stirring Method Based on Phased Array Antenna and Frequency Stirring Techniques

Shielding Effectiveness Characterization of Metallic Rectangular Cascaded Enclosures

Accurate Simulation of Shielding Effectiveness of Metallic Cabins Using an Improved Calderón Preconditioner-Based Time-Domain Integral Equation Method

Technology of the Reverberation Chamber for EMC Test

Study of Influence of Air Gap Generated by Middle-Span Support for the Horizontal Stirrer on the Performance of a Reverberation Chamber

Uncorrelated Configurations and Field Uniformity in Reverberation Chambers Stirred by Tunable Metasurfaces

A Fast Technique to Evaluate Uniformity Conformity to Standards' Requirement for a Reverberation Chamber at the Low End of Test Frequency

Switchable Metasurface Absorber Used for Enabling Reconfigurable Power Angular Spectrum in Reverberation Chamber

Study of independent sampling points in a reverberation chamber with two stirrers

The Effect of Zigzag Boundaries on the Reverberation Chamber Performance

An Efficient Ray-Tracing Method for Analysis and Design of Electromagnetic Shielded Room Systems

Evaluation of the Split Stirrer in Reverberation Chamber

A Source Reconstruction Method for Unknown EMISources Inside a Shielding Enclosure Based Onmagnitude-Only Near-Field Scanning

Influence of Reflectors on Field Uniformity in Reverberation Chamber

Surface Impedance Modulation of FSS Composite Absorber for RCS Reduction at Normal and Grazing Incidence

Development of a Simple Setup to Measure Shielding Effectiveness at Microwave Frequencies

Reconfigurable Energy Selective Surface with High Shielding for Large Angles of Incidence Based on Origami

Calibration Test of Reverberation Chamber

Near-Field Scanning Based Shielding Effectiveness Analysis of System in Package

Notice of Retraction: Analysis of Near-Field Shielding Effectiveness for the SiP Module