Abstract:Source rock shales have permeability in the nano-Darcy range and require drilling long horizontal wells and extensive hydraulic fracturing to commercially produce hydrocarbons. Recently, an electromagnetic (EM) thermal method was proposed as a primary, or secondary, stimulation method to produce light hydrocarbons from extremely tight reservoirs. This method was based on the fact that EM heating rapidly elevates the pore-water pressure in tight rocks to fracture the reservoir. Since only the in-situ pore-water is needed, this is considered to be a water-free stimulation method, which is especially desirable for regions with limited water resources. Herein this further study provides an in-depth and quantitative investigation of the effects of laboratory EM stimulation on the permeability of the source rock shales under hydrostatic confinement and its dependence on the rock water content. In order to maintain hydrostatic pressure, a special pressure cell was built using nearly microwave transparent materials. Permeability of the samples before and after EM stimulation was acquired using a novel method capable of simultaneously measuring both matrix and fracture permeability. Microwave heating was found to generate extensive fractures in the source rock samples with a moderate amount of pore-water, which resulted in an increase of more than three orders of magnitude in permeability. This study provides further comprehensive evidence suggesting that EM thermal stimulation can be an efficient production method for source rock reservoirs and can result in both a high recovery rate and large estimated ultimate recovery of hydrocarbons.

Transformation of oil-and-gas reservoir with shock waves by high current pulsed discharge ignited energetic materials explosion

Underwater Shock Wave Generated by Exploding Wire Ignited Energetic Materials and Its Applications in Reservoir Stimulation

Generation of Electrohydraulic Shock Waves by Plasma-Ignited Energetic Materials: Ii. Influence of Wire Configuration and Stored Energy

Generation of Electrohydraulic Shock Waves by Plasma-Ignited Energetic Materials: Iii. Shock Wave Characteristics with Three Discharge Loads

Experiments on the characteristics of underwater electrical wire explosions for reservoir stimulation

The Effect of Explosion Parameters on Seismic Source Wavelet Calculation and Its Characteristics

Investigation on the Evolution of Shock Wave Energy in the Fracturing Process via High voltage Electric Pulse

Detonation of a nitromethane-based energetic mixture driven by electrical wire explosion

Shock wave generated by composite energetic material driven by electrical non-penetrating wire explosion plasma

Generation of Electrohydraulic Shock Waves by Plasma-Ignited Energetic Materials: I. Fundamental Mechanisms and Processes

PRELIMINARY EXPERIMENT ON SHOCK WAVES GENERATED BY UNDERWATER ELECTRICAL EXPLOSION OF WIRES

Ignition Performance of Cu-wire Electrical Explosion Plasma on Energetic Materials

Damage analysis of cement sheath and rock subjected to electrohydraulic shock waves under the perforation completion

Experimental and Numerical Study of Shock Wave Propogation Produced by Underwater Electrical Wire Explosion

Electromagnetic-heating enhancement of source rock permeability for high recovery

Electrical wire explosion as a source of underwater shock waves

Underwater Pressure Waves Generated by Electrical Exploding Wire Ignited Energetic Materials: Parametric Study and Formulation Optimization

Theoretical analysis and engineering application of controllable shock wave technology for enhancing coalbed methane in soft and low-permeability coal seams

Electrical Explosion Across Gas–liquid Interface: Aerosol Breakdown, Shock Waves, and Cavity Dynamics

Numerical simulation of the effect of water-decoupling charge blasting on reservoir permeability enhancement