Abstract:Summary form only given. Underwater electrical wire explosion could be an optimal way to produce partially controllable shock waves, thus becoming a promising method for breaking stones, exploiting related applications, etc. The mechanisms of forming shock waves by utilizing electrical explosion of thin metal wires in various media might be sophisticated, with several processes demanding to be considered. It could be known that both phase transition and expansion of discharge channel contribute to shock waves' formation according to previous researches. Therefore, different wire materials or circuit parameters would definitely have influences on the shock waves. However, precise quantitative calculation might be relatively difficult. Al, Cu, W, W-Re, Mo, Ni, Ti, Fe, Ta, and Nb wires were exploded by microsecond timescale pulsed current peaking at ~50 kA in water. The platform contained a 6 μF pulse capacitor with an initial voltage of 25 kV. Shock wave waveforms were recorded by PCB 138A piezoelectric probes and PVDF probes. Time of flight method was also adopted to calibrate the probes. Peak pressure, impulse, and other related parameters were analyzed. The results showed the materials do have influence on the shock waves. For instance, with same storage energy, although shock waves generated by Cu and Mo wire could have comparable peak pressure, the impulse could have an evidently difference (Mo's was larger), which might be caused by the phase explosion. However, it is quite hard to control variables of the wires and a more systematical group of experiments would be indispensable in the following studies.

Underwater Shock Wave Generated by Exploding Wire Ignited Energetic Materials and Its Applications in Reservoir Stimulation

Experiments on the characteristics of underwater electrical wire explosions for reservoir stimulation

Generation of Electrohydraulic Shock Waves by Plasma-Ignited Energetic Materials: Ii. Influence of Wire Configuration and Stored Energy

Electrical wire explosion as a source of underwater shock waves

Detonation of a nitromethane-based energetic mixture driven by electrical wire explosion

Generation of Electrohydraulic Shock Waves by Plasma-Ignited Energetic Materials: I. Fundamental Mechanisms and Processes

Ignition Performance of Cu-wire Electrical Explosion Plasma on Energetic Materials

Transformation of oil-and-gas reservoir with shock waves by high current pulsed discharge ignited energetic materials explosion

Effects of Circuit Inductance on Electrical and Shock Wave Characteristics at Underwater Wire Explosion

Shock wave generated by composite energetic material driven by electrical non-penetrating wire explosion plasma

Parameter Regulation of Underwater Shock Waves Based on Exploding-Wire-ignited Energetic Materials

PRELIMINARY EXPERIMENT ON SHOCK WAVES GENERATED BY UNDERWATER ELECTRICAL EXPLOSION OF WIRES

Experimental and Numerical Study of Shock Wave Propogation Produced by Underwater Electrical Wire Explosion

Generation of Electrohydraulic Shock Waves by Plasma-Ignited Energetic Materials: Iii. Shock Wave Characteristics with Three Discharge Loads

Enhancement of Shock Wave from Underwater Electrical Wire-Array Explosion at a Fixed Energy by Changing Wire Connection

Underwater Pressure Waves Generated by Electrical Exploding Wire Ignited Energetic Materials: Parametric Study and Formulation Optimization

Research on the sub-millisecond underwater electrical wire explosion process

Shock Wave Characteristics Generated by Electrical Explosion of Different Wires in Water

Compact Equipment Used For Underwater Electrical Wire Explosion

Experimental Study on Shock Wave Characteristics of Ammonium Nitrate Ignited by Wire Explosion