Design of Angle Measuring Device Based on Monolithic Microprocessor

Feng-nian YANG,Wen-de HE,Guang-can LIU

DOI: https://doi.org/10.3969/j.issn.1673-1255.2005.02.018

2005-01-01

Abstract:The hardware structure and principles of the circuit design of the angle measuring device based on AT89S51 are analyzed.The flow chart and source code of the main function on C51 are provided. The samples has passed many environment tests.

What problem does this paper attempt to address?

Study on the temperature control system design based on the MCU

CHEN Jun

DOI: https://doi.org/10.3969/j.issn.1001-9227.2009.04.015

2009-01-01

Abstract:The single chip computer is applied to product temperature control system which is main control unit in the market throuyhing.A temperature control system is designed by using AT90S8535 single chip,which performance is fine and have development potential produced by ATMEL company.The basic component parts and principle are introduced,and the design of hardware circuit and software are also discussed.
Based on the single chip microcomputer proteus the A/D transformation design and simulation

CHEN Jun,LIAN Yu-ping,GOU Shuang-quan

DOI: https://doi.org/10.3969/j.issn.1001-9227.2012.02.058

2012-01-01

Abstract:For Protues of abundant simulation models of component and the powerful function of simulation,a new way is presented to A/D conversion of MCU.The diagram schematics are figured out by making use of ADC0808 chip,AT89C52 and 7SEG displayer,and tests are given on the simulation by integrating Keil software,simulation effect of circuit can be observed in a direct and clear way.That reaches the aim of design.
The Design and Application of an Altimeter System Based on 89C52

YUAN Jie,HAN Bo,LI Ping

DOI: https://doi.org/10.3969/j.issn.1001-4551.2005.10.009

2005-01-01

Abstract:This paper accounts for the design problem of an altimeter system based on 89C52,which is an 8 bit microcontroller produced by ATMEL. Specially,it depends on the relationship between pressure,temperature and altitude.The most important points in this paper is that it uses the I/O in 89C52 to achieve the function of SPI,which makes the A/D function come true with TLC2543.Thereafter it transfers the data which is processed to the LCD,also it returns the data to the control computer through RS232.
The Design of Electronic Scales Based on AT89C2051 Microcontroller

Cheng Fei

Abstract:In recent years,the emergence of new single—chip computer and IC technology development,product design to update and develop the stock controller provides high performance conditions. In this paper,electronic scales system is designed based on pressure sensor,A/D converter,AT89C2051 microcontroller and LED display. It explained from hardware structure,connectivity and software parts of the circuit. This electronic system is called simple structure,low cost and high precision.

Computer Science,Engineering
Design of Temperature Control System Based on AT89S52

D. Lixia

Abstract:The paper introduces intelligent temperature measurement and control system to use single chip.proposes a microcontroller-based AT89S52 temperature measurement and control device.The device can achieve the right temperature measurement,and set value based on the environmental temperature regulation,temperature control to achieve the purpose.This paper focuses on the hardware configuration of the system,the main part of the role and system software design process.The design of the microcontroller temperature control system of the basic theory and application of techniques are more comprehensive presentation.

Computer Science,Engineering
Design of Motor Speed Measurement System Based on Single Chip Microcomputer

S. Ma,Li Zhang

DOI: https://doi.org/10.1109/IS3C.2018.00110

2018-12-01

Abstract:This system is the motor speed measurement, and PC and can communicate that the motor speed, and to observe the motor running the basic situation. The main design AT89C51 control as the core, by the Hall sensor, LED digital CRT, HIN232CPE-levelconversion, and RS232. Detailed measurements of the speed of the SCM system and PC and the serial communication between the microcontroller. Give full play to the performance of the SCM. This paper is to measure the speed and displayed in five LED digitalp ipe.

Engineering,Computer Science
Design of Digital Height Measurement Based Microcontroller AT89C51

Tri Isra Janwardi

DOI: https://doi.org/10.55299/jostec.v1i1.49

2019-12-29

Abstract:Height measuring instrument is a tool that can be used by humans to assist in the process of determining height. Most height gauges in use today are analog or manual height gauges. In today's technological developments, the author will make an automatic height measuring device using ultrasonic sensors to calculate data from received objects. The sensor is used to measure the working distance at a frequency of 40 KHz so as not to interfere with human hearing. As the control center of this measuring instrument, it uses the Arduino Uno Microcontroller. This measuring instrument is capable of measuring an object with the accuracy of the sensor reading the data, namely the maximum height of 195 cm and the minimum height of 50 cm. The advantage of this tool is that it uses a microcontroller and sensor technology, while to display measurement results using an LCD and LCD measuring instruments can move according to the height of the object, to move the LCD a DC motor is used as the driver. And the measurement results are issued through the speaker in the form of sound that has been stored on the SD Card in WAV format, making it easier for blind people to know the user's height. The drawback of this tool is the construction of the tool and sensor readings, so that the results obtained from the measurements still contain some errors.

Engineering,Computer Science
Improvement of Ultrasonic Distance Measuring System

Yu Jiang,Rui Song,Mingting Yuan

DOI: https://doi.org/10.1051/itmconf/20181702008

2018-01-01

ITM Web of Conferences

Abstract:This paper mainly introduces a kind of ultrasonic distance measuring system with AT89C51 single chip as the core component. The paper expounds the principle of ultrasonic sensor and ultrasonic ranging, hardware circuit and software program, and the results of experiment and analysis.The hardware circuit based on SCM, the software design adopts the advanced microcontroller programming language.The amplitude of the received signal and the time of ultrasonic propagation are regulated by closed loop control. [1,2]The double closed loop control technology for amplitude and time improves the measuring accuracy of the instrument. The experimental results show that greatly improves the measurement accuracy of the system.
A Method of Digitalized Implementation of Analog Based on Single Chip 89C52

Ren Yanxia

DOI: https://doi.org/10.3969/j.issn.1672-9560.2007.07.027

2007-01-01

Abstract:The design is based on the single chip-89C52, and it is used to measure the true virtual value of the AC voltage and AC current, active power, reactive power and power factor of the 50Hz signal real time. The principles of hardware and the method of designing software are discussed in detail.
The Design of Metallographical Cutter Autocontrol System Based on AT89S52 Single Chip Microcomputer

SUN Yao-jie,YIN Fei-xing,GAO Li-zhe,CHEN Shu-ping

DOI: https://doi.org/10.3969/j.issn.1001-2257.2007.01.017

2007-01-01

Abstract:In this paper,we introduce the principle of metallographical cutter control system and the design method of software and hardware based on the AT89S52 singal-chip microcomputer.To the point,the selections of cutting speed and model depend on the metallic attributes,in order to avoid damaging the structure and characteristic of the metal.The applications prove that the design is excellent and the system has the advantages of perfect practicability,convenience manipulation,stabilize performance and high reliability.In practice courses,the control accuracy can meet the challenge.
Design and Realization of Orientation System for Worktable of Microscope

耿远迎,齐国生,徐端颐

DOI: https://doi.org/10.3321/j.issn:1002-1582.2004.01.017

2004-01-01

Optical Technique

Abstract:The orientation system for microscope worktable based on AT89C52 chip microcomputer is designed. Fine-pitch gears are used in mechanically-driven section to realize the transfer of movement and power. Circuit control section is used to gain count impulses and to control motors. Commands and data can be sent from host computer. The microscope worktable can be controlled to move according to the pre-established mode, and realize 2D movement. The re-orientation accuracy of 2 directions is ±50μm, which needs the demand of the experiments of multi-wave optical storage, and provides an automated methods for medical detection.
A Way of Automatic Measuring Micro-Accelerometer Using Monolithic Computer

Yu-xiang FENG,Jing-xin DONG,Chang-de ZHAO,Tian-zhun WU

DOI: https://doi.org/10.3969/j.issn.1671-4776.2005.07.008

2005-01-01

Abstract:An automatic measuring system based on the monolithic computer of ATMEL Corporation was introduced,according to the criterion of the measuring of micro-accelerometer.The A/D grounds separation,the time-lapse of P/N voltage,the temperature collection and the serial port protocol were analyzed.The results show that this is a low-cost and credible solution for micro-accelerometer auto-measurement.
Design of Digital Electronic Scales Based on Single Chip Microcomputer

Feng Chun-ba

Abstract:This paper designed a microcontroller-based intelligent digital electronics scale. Using AT89C52 microprocessor core for system control,and through using the weight acquisition module,signal conversion module,data processing module and display module and a series of signal acquisition and processing circuit to present weight information to the user. It provides boot intelligent calibration,automatic overweight alerts,and also a complete user function,and the system performance is stable,reliable,low cost and has friendly man-machine interface and low power consumption,and can be widely applied to modern business in the market.

Computer Science,Engineering
The Design and Realization of AHRS Based S3C44B0X

WEI Ping,HAN Bo,LI Ping

DOI: https://doi.org/10.3969/j.issn.1001-4551.2006.04.005

2006-01-01

Abstract:Attitude and heading are the important parameters in unmanned aerial vehicle(UAV).The hardware and software design of the attitude and heading reference system(AHRS) based on S3C44B0X microprocessor is analyzed.It emphasizes to introduce the realization procedure of this system based on μC/OS-II real-time operating system(R-TOS).A performance test is performed.Test results show that the angle accuracy of the AHRS is ±0.5°for tilt and ±1°for heading,which satisfy the requirement to attitude and heading measurement for UAV flight control.
Research on Simulation design of temperature control system based on 51 single chip microcomputer

Qiuyu Li,Yunjin Yang,Zhisen Zhang

DOI: https://doi.org/10.1109/ICMTIM58873.2023.10246483

2023-05-26

Abstract:This paper presents a temperature control system that utilizes the AT89C51 microcontroller as its control core. The system collects and converts temperature data through the use of a DS18B20 temperature sensor. The paper provides detailed explanations of the system scheme design, hardware design, and software design, with simulation tests conducted using Keil software and Proteus software to verify the scientific nature of the system and the effectiveness and feasibility of the proposed scheme.

Engineering,Computer Science
Long Distance Monitoring and Controlling System Based on AT89S52

XU HAIBO,LIAO CHUANSHU

DOI: https://doi.org/10.3969/j.issn.1008-0570.2007.20.026

2007-01-01

Abstract:At now, with the fast development of the applied technology of the Single-chip Microprocessor, the embedded systems with the core of Single-chip Microprocessor have been used in many fields. In this paper, there is a project of a Long Distance Auto-matic Monitoring and Controlling System for Alarm, which is constituted by the AT89S52 and the chip of the DTMF.
Application of AVR Microcontroller on Aerodynamic Particle Sizer

WANG Fang,LIU Jian-guo,HUANG Shu-hua

DOI: https://doi.org/10.3969/j.issn.1673-6141.2008.06.011

2008-01-01

Abstract:The design method of aerodynamic particle sizer which takes the ATMEGA128 chip as the control core is presented.ATMEGA128 chip is a kind of monolithic integrated circuit series of AVR single chip.The design method of hardware and software of this systerm is also given.The single chip communicates with computer to control the apparatus,analyze the aerosol particle and drive the LCD module to display the two-dimensional graph and status of the apparatus.Man-machine interaction is realized.At present,this system is in trial operation and prepared to invest in environmental gas monitoring.
Temperature Measuring System Based on AVR Single-Chip Microcomputer

李龙飘,王岚,万传松,郭涛

2008-01-01

Abstract:In this paper,a temperature measurement system is introduced including eight bits programmable FLASH AVR microcontroller ATmega8L,1602 LCD,DS18B20 digital thermometer and other components.With the use of CodeVisionAVR C Compiler,which has chip-related library functions,the system development process is convenient and quick.A complete analysis and discussion of the hardware interface design and the programming examples are presented.
A System Design Method of Micro-G Silicon Accelerometer with A Cmos Precision Interface Circuit

HY Wang,YM Li,HY Chen

DOI: https://doi.org/10.1109/icsict.2001.982016

2001-01-01

Abstract:In this paper, a system design method of micro-g silicon accelerometer with a CMOS precision interface circuit is presented. It contains the detail design steps in order to directing the design process, and also gives system level understand of the relation between the fabrication architecture of silicon accelerometer, which is transformed into equivalent circuit, and its interface circuit (signal detection circuit). At last, an electronics system architecture uniting the accelerometer equivalent circuit with the interface circuit that can be implemented in CMOS process is presented.
Design of an Intelligent Alarm System Based on 80C51

LI Hao-ran,CHEN Xiao-yu,LIU Yu-ling,WANG Xiao-ping

DOI: https://doi.org/10.3969/j.issn.1673-629x.2012.05.060

2012-01-01

Abstract:The safety of househood is the key part of personal and property safety.As the increased case of housebreaking and robbery,the demand of a cheap,simple house alarm system with small disturbance is rising day by day.It introduces an alarm system based on the 80C51 microcontroller,describing its composition and software/hardware design.This system integrates situation identification,voice warning,on-site and remote alarming with relatively low cost,guaranteeing a friendly man-machine-environment by providing both guests and the house owner with necessary instructions.It supports operations including system activation/deactivation,time setting,password setting,alarming phone numbers setting,alarming time and phone number recording and checking.When activated,it would simultaneously ring the alarm and dial the stored numbers to inform the owner or the police of the potential housebreaking.The system designed here will be base of the practicle alarm system in the future.

Design of Angle Measuring Device Based on Monolithic Microprocessor

Study on the temperature control system design based on the MCU

Based on the single chip microcomputer proteus the A/D transformation design and simulation

The Design and Application of an Altimeter System Based on 89C52

The Design of Electronic Scales Based on AT89C2051 Microcontroller

Design of Temperature Control System Based on AT89S52

Design of Motor Speed Measurement System Based on Single Chip Microcomputer

Design of Digital Height Measurement Based Microcontroller AT89C51

Improvement of Ultrasonic Distance Measuring System

A Method of Digitalized Implementation of Analog Based on Single Chip 89C52

The Design of Metallographical Cutter Autocontrol System Based on AT89S52 Single Chip Microcomputer

Design and Realization of Orientation System for Worktable of Microscope

A Way of Automatic Measuring Micro-Accelerometer Using Monolithic Computer

Design of Digital Electronic Scales Based on Single Chip Microcomputer

The Design and Realization of AHRS Based S3C44B0X

Research on Simulation design of temperature control system based on 51 single chip microcomputer

Long Distance Monitoring and Controlling System Based on AT89S52

Application of AVR Microcontroller on Aerodynamic Particle Sizer

Temperature Measuring System Based on AVR Single-Chip Microcomputer

A System Design Method of Micro-G Silicon Accelerometer with A Cmos Precision Interface Circuit

Design of an Intelligent Alarm System Based on 80C51