Abstract:Palladium diselenide (PdSe2), a noble transition metal dichalcogenide has attracted increasing attention in recent years due to its outstanding semiconductor properties. In this study, 2D PdSe2 nanofilms with thicknesses ranging from 2 to 28 nm and their heterostructures with Si substrates (PdSe2/Si heterostructures) were synthesized via a simple selenization method. Electrical transport characterizations based on field-effect transistor devices indicate that the few-layer PdSe2 nanofilms exhibit a p-type semiconducting behavior. The optimal sensing performance of the PdSe2/Si-8 sensor (8 nm-thick PdSe2) exhibits a comparable response toward NO2 gas (ΔR/Ra = ∼7.2% to 100 ppb and ∼18% to 1 ppm) at room temperature (RT). This response may result from the heterostructure effect and maze-type surface. Additionally, the PdSe2/Si-8 sensor has selectivity toward NO2 compared with other gases including NO, H2, CO, NH3, and C2H5OH. Furthermore, density functional theory (DFT) calculations reveal the largest adsorption energy and charge transfer between NO2 and the PdSe2 surface, which coincides well with the experimental results. Moreover, the PdSe2/Si-8 sensor also exhibits repeatability and long-term stability during about 4 months at RT. These results indicate that the PdSe2/Si heterostructures may be a promising nanomaterial for room-temperature NO2 gas-sensing devices.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsanm.1c01339?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsanm.1c01339</a>.Supplementary scheme, figures, table, and references (<a class="ext-link" href="/doi/suppl/10.1021/acsanm.1c01339/suppl_file/an1c01339_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Preparation and Gas-Sensing Properties Investigation of Flexible NO2 Sensor Based on PPy-CeO2Composite Thin Film

A Flexible NO2 Gas Sensor Based on Polypyrrole/nitrogen-Doped Multiwall Carbon Nanotube Operating at Room Temperature

Flexible Resistive Gas Sensor Based on Molybdenum Disulfide-Modified Polypyrrole for Trace NO2 Detection

Highly Sensitive NH3 Gas Sensors Based on Novel Polypyrrole-Coated SnO2 Nanosheet Nanocomposites

Comparison of response towards NO2 and H2S of PPy and PPy/TiO2 as SAW sensitive films

Fabrication of a Sensitive Gas Sensor Based on PPy/TiO2 Nanocomposites Films by Layer-by-layer Self-Assembly and Its Application in Food Storage

Preparation and characterization of PEDOT films for NO2 gas sensors

In Situ Prepared Composite of Polypyrrole and Multi-Walled Carbon Nanotubes Grafted with Sodium Polystyrenesulfonate As Ammonia Gas Sensor with Wide Detection Range

Interfacial oxygen vacancies and energy-level engineering on CeO 2 -PPy-rGO nanocomposites towards boosted NO 2 sensor performance

Interfacial Oxygen Vacancies and Energy-Level Engineering on CeO2-PPy-rGO Nanocomposites Towards Boosted NO2 Sensor Performance

Novel flexible room temperature NO2 gas sensor based on polypyrrole coated SnO2 nanoparticles

Ultrasensitive flexible NO2 gas sensors via multilayer porous polymer film

Fabrication of Reproducible and Selective Ammonia Vapor Sensor-Pellet of Polypyrrole/Cerium Oxide Nanocomposite for Prompt Detection at Room Temperature

Self-assembly of TiO2/polypyrrole Nanocomposite Ultrathin Films and Application for an NH3gas Sensor

NO2 Gas Sensor Based on Polyvinylpyrrolidone/reduced Graphene Oxide Nanocomposite

In Situ Polymerization Deposition of Porous Conducting Polymer on Reduced Graphene Oxide for Gas Sensor.

A gas sensor based on polyhexylthiophene-carbon black for NO 2 detection

Bilayer polymer dielectric systems for high response NO2 gas sensors

Polymer/Graphene oxide nanocomposite thin film for NO2 sensor: An in situ investigation of electronic, morphological, structural, and spectroscopic properties

Polypyrrole Film Fabrication with NH3 Gas Sensing Properties

Few-Layer PdSe 2 Nanofilm/Si Heterojunction for Sensing NO 2 at Room Temperature