Hybrid 2D-3D Modeling Method for Electromagnetic Acoustic Phased Array
Yuxuan Zhao,Shen Wang,Youtian Wang,Haihan Li,Songling Huang
DOI: https://doi.org/10.1109/icemi59194.2023.10270395
2023-01-01
Abstract:As emerging nondestructive testing technologies, the electromagnetic acoustic and ultrasonic phased array inspection technologies have broad application prospects. By combining these two technologies, the electromagnetic acoustic transducer (EMAT) phased array is of great research significance. When building the model of EMAT phased array, due to the difficulty in solving the three-dimensional multi-physical coupling model, existing literature lacks research on the imaging of two-dimensional EMAT arrays in three-dimensional space. Therefore, this paper established a 3D model of EMAT phased arrays by means of mapping in the multiphysics coupling simulation software COMSOL and carried out simulation solutions. In this paper, firstly, the process of electromagnetic field and elastic dynamic field coupling to generate ultrasonic waves during EMAT operation was derived, as well as the control mode of acoustic beam deflection and focusing in ultrasonic phased arrays. Then, an EMAT transducer array unit was constructed in COMSOL, and a mapping-based simplification was proposed to address the difficulties in constructing a pure 3D model. The calculation results of the electromagnetic field of the 2D axisymmetric model were mapped into the 3D model, thereby achieving the construction of the 3D model under the constraints of computational time and complexity. Finally, based on this, multiple array units were combined to form an EMAT phased array. Models of 1D linear array and 2D planar array were established, and the deflection and focusing of the ultrasonic beam were achieved. The simulation results were compared with the relevant theories to verify the accuracy of the modeling, thus confirming the feasibility of building a 2D-3D Mixture model by mapping.