Abstract:With the increasing attention on oceanography, more effective exploration technology has been of great interests in the community of ocean engineering. Side-scan sonar is a popular imaging equipment for seabed topography; however, it is commonly used under 4 knots, which does not meet the actual demand of the modern oceanographic research. This paper proposes a high-speed side-scan sonar imaging scheme based on multi-beam forming technology. In this scheme, the digital signal processing system can adjust the maximum response direction of the receiving array by introducing appropriate phase shift or time delay to the output, so as to increase the scanning range and then improve operation efficiency. In order to verify the feasibility of this imaging algorithm, an ocean environment model is constructed, which simulates the acoustic propagation theory, the principle of seabed acoustic backscattering and the acoustic signal modulation method. After analyzing the acoustic characteristics of uniform linear array, an underwater acoustic transducer with multiple receiving subarrays is designed. In the process of simulated navigation, the receiving subarrays will generate the electrical signal containing seabed acoustic information. Based on the simulation signal, the parameters of the digital filter in the actual system can be determined in advance, which provides convenience for later processing. The time delay matrix of each receiving channel based on dynamic focusing beamforming method can be verified by imaging the seabed model. The processed acoustic data are combined with GPS information and heading angle to generate seabed scanning image in the host computer system. This paper mainly presents the imaging algorithm of multi-beam side-scan sonar digital signal processing system.

A Method For The Towed Line Array Sonar'S Port-Side/Starboard-Side Discrimination

Tow ship noise canceling combined with left/right discrimination

Effects of Shape Distortion Upon Left/right Discrimination of Towed Twin-Line Array

An Imaging Algorithm for High-speed Side-scan Sonar Based on Multi-beam Forming Technology

Combination of time reversal and synthetic aperture beamforming for active detection of small bottom objects in waveguide environments

Time Reversal and Time Delay Focusing for Proud and Buried Target

TR-MIMO detection of a small target in a shallow water waveguide environment

Bistatic Localization of Objects in Very Shallow Water.

Mutiple input mutiple output combined with time reversal for waveguide sonar active target localization

Design of Portable Three-Dimensional Sonar for Both Far-Field and Near-Field

A Linear Near-Field Interference Cancellation Method Based on Deconvolved Conventional Beamformer Using Fresnel Approximation

Coherent source direction estimation for three-row bathymetric sidescan sonars

Joint Passive Detection and Tracking of Underwater Acoustic Target by Beamforming-Based Bernoulli Filter with Multiple Arrays.

Near-field beamforming for a Multi-Beam Echo Sounder: Approximation and error analysis

A Low-Complexity Real-Time 3-D Sonar Imaging System with a Cross Array

An Efficient Near-Field Parallel Subarray Beamforming for Portable 3D Imaging Sonar

Signal Processing Algorithm and System Realization of Broadband Parametric Array Sub-Bottom Profiler

Multi-Frequency Transmitting Beamforming Algorithm Based on Cross Array

Doa Estimation Based On Multiple Beamspace Measurements Sparse Reconstruction For Manoeuvring Towed Array

Array shape estimation based on tug vehicle noise for towed linear array sonar during turning

Effects of a Typical Shape Distortion on the Left/Right Discrimination of Twin-line Array Sonar