Abstract:Determination of the distribution of a generated acoustic field is valuable for studying ultrasonic transducers, including providing the guidance for transducer design and the basis for analyzing their performance, etc. A method calculating the acoustic field based on laser-measured vibration velocities on the ultrasonic transducer surface is proposed in this paper. Without knowing the inner structure of the transducer, the acoustic field outside it can be calculated by solving the governing partial differential equation (PDE) of the field based on the specified boundary conditions (BCs). In our study, the BC on the transducer surface, i.e. the distribution of the vibration velocity on the surface, is accurately determined by laser scanning measurement of discrete points and follows a data fitting computation. In addition, to ensure the calculation accuracy for the whole field even in an inhomogeneous medium, a finite element method is used to solve the governing PDE based on the mixed BCs, including the discretely measured velocity data and other specified BCs. The method is firstly validated on numerical piezoelectric transducer models. The acoustic pressure distributions generated by a transducer operating in an homogeneous and inhomogeneous medium, respectively, are both calculated by the proposed method and compared with the results from other existing methods. Then, the method is further experimentally validated with two actual ultrasonic transducers used for flow measurement in our lab. The amplitude change of the output voltage signal from the receiver transducer due to changing the relative position of the two transducers is calculated by the proposed method and compared with the experimental data. This method can also provide the basis for complex multi-physical coupling computations where the effect of the acoustic field should be taken into account.

Research on Flow-Acoustic Coupling of Transducer Disturbing Effect On Ultrasonic Flowmeter

Study of No-liquid Calibration Technique for the Medium-and-large Diameter Electromagnetic Flowmeter

Numerical Analysis of Transducer Installation Effect on Ultrasonic Gas Flow Meter

A Method Combining Measurement Tool and Numerical Simulation for Calculating Acoustic Signals of Ultrasonic Flowmeter

Research on Coupling Method of Flow Field and Acoustic Field Based on COMSOL for Ultrasonic Flowmeter.

Numerical Simulation for Vibration of Interferometric Probein Wet Steam Flow Field

New Analysis Scheme of Flow-Acoustic Coupling for Gas Ultrasonic Flowmeter with Vortex near the Transducer

A Novel Ultrasonic Transducer Module with an Own Reference Sound Channel for Flow Measurement

Model simulation and experimental research of acoustic-plane installation angle of multi-path ultrasonic gas flowmeter

A Cfd Simulation For The Ultrasonic Flow Meter With A Header

Data Integration for Multi-Path Ultrasonic Flowmeter Based on Levenberg–Marquardt Algorithm

Research on the Influencing Factors to Ultrasonic Flow Measurement

Research on flow diagnosis of multipath ultrasonic flowmeter

Numerical Simulation on the Flow Field Inside an Ultrasonic Water Meter

Signal Processing Method Based on Connection Fitting of Echo Peak Point with a Large Slope for Ultrasonic Gas Flow Meter.

Calculation of Acoustic Field Based on Laser-Measured Vibration Velocities on Ultrasonic Transducer Surface

Effects Of Velocity Profiles On Measuring Accuracy Of Transit-Time Ultrasonic Flowmeter

Design of High-Accuracy Ultrasonic Flowmeter

Study of the Accuracy of Ultrasonic Flowmeters for Liquid

Optimization design and research of ultrasonic flowmeter based on time difference method

Experimental and Numerical Analysis of a Novel Flow Conditioner for Accuracy Improvement of Ultrasonic Gas Flowmeters