Abstract:The selective catalytic reduction (SCR) technique that converts NOx from the outlet of industrial boilers at low temperature (<200 °C) requires catalysts that possess both the oxidization property of NOx and the adsorption ability to NH3. However, owing to unsuitable redox capacity, most NH3-SCR catalysts such as MnO2/TiO2 and MnO2–CeO2/TiO2 suffer from poor activity and N2 selectivity and SO2 poisoning. Benefiting from constructing mesoporous MnCeSmTiOx amorphous mixed oxides by the coprecipitation method, enhanced SO2-tolerant low-temperature NH3-SCR performance was achieved. The MnCeSmTiOx catalysts have an amorphous and mesoporous structure with a BET surface area of 214 m2·g–1. The NO conversion could reach nearly 100% at 140–320 °C and maintain >90% at 400 °C and a gas hourly space velocity of 80,000 h–1. The selectivity of N2 could be maintained at ≈100% at 100–320 °C and stay at >90% up to 400 °C. Besides, the MnCeSmTiOx catalyst preserves higher catalytic performance after introducing H2O and SO2 compared with the catalysts without adding Sm. The redox properties, acidic properties, and reaction intermediates of catalysts were analyzed by X-ray photoelectron spectroscopy, hydrogen temperature-programmed reduction, ammonia temperature-programmed desorption (NH3-TPD), O2-TPD, pyridine-IR, thermogravimetry–differential scanning calorimetry, and diffuse reflectance infrared Fourier transform. The synergistic effect of the Lewis acid sites and oxidation catalytic sites of mixed oxides serves for the conversion of NO to N2 by following the Langmuir–Hinshelwood mechanism. Doping Sm into MnCeSmTiOx can increase oxygen vacancies and transfer electrons to Mn4+ and Ce4+, which facilities the formation of active adsorbed NO2, bidentate nitrate, and bridging nitrate intermediates and suppresses SO2 poisoning by inhibiting the oxidation of SO2 by Mn4+ and Ce4+. Our work could be beneficial to modulate the redox capacity of active sites on NH3-SCR catalysts so that NOx can be eliminated in complex flue gas at low temperatures.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acscatal.0c02567?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acscatal.0c02567</a>.Experimental details, kinetic experiments and the calculation process of the reaction rate, reaction order, and TOF; XRD patterns; TEM images; and in situ DRIFTS spectra with adsorption of NH3 NO + O2 on MnSmTiOx and CeSmTiOx catalysts (<a class="ext-link" href="/doi/suppl/10.1021/acscatal.0c02567/suppl_file/cs0c02567_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

NH3-SCR catalytic activity and SO2 resistance over Mo/Mn-TiO2 catalyst

Molybdenum-containing oxide catalysts for selective catalytic reduction of NOx with NH3

C,N‐modified TiO2‐supported Mn–Ce–Cox‐based Catalyst for Low‐temperature NH3‐SCR

Catalytic performance of MnO_x/WO_3/TiO_2 catalyst for low-temperature selective catalytic reduction of NO_x by NH_3

Preparation of MnOx-MoO3/TiO2-Al2O3 Catalyst and Its SCR Denitration Performance

WO3 modification on MnOx/TiO2 low-temperature De-NOx SCR catalyst

A Comparative Study on the Mn/TiO2-M(M = Sn, Zr or Al) Ox Catalysts for NH3-SCR Reaction at Low Temperature

The role of NH3 in the low-temperature selective catalytic reduction of NO over MnOx/TiO2

VxMn(4-x)Mo3Ce3/Ti catalysts for selective catalytic reduction of NO by NH3

SO2 Deactivation Mechanism of MnOx/MWCNTs Catalyst for Low-Temperature Selective Catalytic Reduction of NOx by Ammonia

Performance of Low-temperature SCR of NO with NH3 over MnOx/Ti-based catalysts

Synthesis of novel Co(3-x)MnxO4@TiO2 core-shell catalyst for low-temperature NH3-SCR of NOx with enhanced SO2 tolerance

Low-temperature selective catalytic reduction of NO on MnOx/TiO2 prepared by different methods

Efficient Sm Modified Mn/TiO2 Catalysts for Selective Catalytic Reduction of NO with NH3 at Low Temperature

In situ FT-IR studies on low temperature NH3-SCR mechanism of NOx over MnOx/WO3/TiO2catalyst

MnOx/TiO2 catalysts prepared by ultrasonic impregnation for low temperature selective catalytic reduction of NO

Selective catalytic reduction of NOx with NH3 over Mn–Zr–Ti mixed oxide catalysts

Synthesis and Catalytic Performance of Cu1Mn0.5Ti0.5Ox Mixed Oxide As Low-Temperature NH3-SCR Catalyst with Enhanced SO2 Resistance

The Role of NH_3 in the Low-Temperature Selective Catalytic Reduction of NO over MnO_x/TiO_2

Novel Ultrasonic-Modified MnOx/TiO2 for Low-Temperature Selective Catalytic Reduction (SCR) of NO with Ammonia.

Improved Activity and SO 2 Resistance by Sm-Modulated Redox of MnCeSmTiO x Mesoporous Amorphous Oxides for Low-Temperature NH 3 -SCR of NO