Abstract:Based on the Structure Oriented Lumping (SOL) method, a molecular-level reaction kinetic model for hydrocracking process was established to investigate the reaction laws of polycyclic aromatic hydrocarbons (PAHs) and heteroatomic compounds in hydrocracking process and calculate the molecular compositions of hydrocracking products. Molecules showed different reaction laws due to the differences of the initial contents, the structural increments and their positions in the reaction network. Since the hydrodenitrogenation reactions of indole and carbazole homologs were more difficult to carry out than the hydrodesulfurization reactions of benzothiophene and dibenzothiophene homologues, the denitrification rate was lower than the desulphurization rate at the outlet of the hydrotreating section. When the reaction temperature of the hydrotreating section was 360 °C, the conversion rates of sulfides and nitrides were 98.4 % and 91.3 %, respectively. The increase of reaction temperature intensified the hydrogenation saturation of aromatics, the ring opening of naphthenes and the cracking of paraffins. As the reaction temperature of the hydrocracking section rose from 370 °C to 410 °C, more isomerized carbon ions were generated due to the β-position cracking of paraffins. The mass ratio of methylbutane to n-pentane in light naphtha increased from 1.29 to 3.08. The increase of reaction temperature accelerated the side chain cracking reactions of naphthenes with 4 or more carbon atoms in the side chains, and generates more naphthenes with 0 to 3 carbon atoms in the side chains. Aromatics mainly underwent the ring-by-ring hydrogenation saturation reactions in the hydrotreating section, and bicyclic aromatic hydrocarbons was significantly easier to be hydrogenated than monocyclic aromatic hydrocarbons.

Reaction network and thermodynamic equilibrium for tetralin hydrocracking over NiMo/HY catalyst

Supported Nanometric Platinum–nickel Catalysts for Solvent-Free Hydrogenation of Tetralin

Study on Complex Reaction Network and Kinetic Model of a Methanol to Propene Process

Lumped Kinetics Model and Its On-Line Application to Commercial Catalytic Naphtha Reforming Process

Hydrogenation Saturation Discipline of 1-Methyl Naphthalene over Ni-Mo Catalyst

Kinetic Modeling with Automatic Reaction Network Generator, an Application to Naphtha Steam Cracking

Tetralin Hydrocracking Reaction Network to Single-Ring Aromatics on Bifunctional Catalysts

Low-Temperature-Initiated Cracking of Hydrocarbons to Produce Olefins: Simulation and Comparison of Different Initiators

STUDY ON THE HYDROCRACKING REACTION RULE OF FEED CONTAINING TETRALINS AND NAPHTHALENES MIXTURE

Synthesis of Propionitrile by Acrylonitrile Hydrogenation over the Ni Catalyst in the Gas-solid Phase

Modeling and Optimization of Ethane Steam Cracking Process in An Industrial Tubular Reactor with Improved Reaction Scheme

Detailed understanding on thermodynamic and kinetic features of phenanthrene hydroprocessing on Ni‐Mo/HY catalyst

Reaction laws of polycyclic aromatic hydrocarbons and heteroatomic compounds in hydrocracking process

Catalytic Hydropyrolysis of Lignin Using NiMo-doped Catalysts: Catalyst Evaluation and Mechanism Analysis

Effect of the catalytic system and operating conditions on BTX formation using tetralin as a model molecule

Selective Hydrogenation of Naphthalene over γ-Al2O3-Supported NiCu and NiZn Bimetal Catalysts

Selective Hydrogenation of Crotonaldehyde over Ir/TiO2 Catalysts: Unraveling the Metal-Support Interface Related Reaction Mechanism

Zeolite domination in coordination between metal and acid sites on an industrial catalyst for tetralin hydrocracking

Effect of Catalyst on Distribution of Nitrogen in Products from Residue Hydrocracking

Correlating C═C, C═O, and C═N Hydrogenation Activity with Hydrogen Binding Energies on Ni–Fe Bimetallic Catalysts

Catalytic Hydrocracking of a Bitumen‐Derived Asphaltene over NiMo/γ‐Al2O3 at Various Temperatures